installation instructions slim puck mini led pucks - GM Lighting

INSTALLATION INSTRUCTIONS SLIM PUCK MINI LED PUCKS

“Lighting Enhanced by Design”

BEFORE YOU START: • Please check local electrical codes before beginning • Turn power off before installing • Make sure to use proper rated wire RECESSED INSTALLATION:

TOOLS NEEDED: • Drill with 1” bit

1”

1. SlimPuck Minis provide niche illumination. Perfectly suited for small spaces, installation is as simple as drilling a 1” hole (Fig. 1), feeding wires through that hole, and then pushing the puck up into the hole (Fig. 2). Mounting springs will capture the puck and hold it snugly.

Fig. 1

NOTE: Pucks can be mounted in parallel runs. Please observe wattage limitations of power supply. Example: A 20 watt power supply can power up to 16* 1 watt Slim Puck Minis. * Power supplies should only be loaded up to 80%.

+

48” - 24AWG leads included

Fig. 2

Layout Diagrams GMSB-W/B (splice box) Power Supply

+ -

1 Watt

Power Supply

1 Watt

1 Watt

“Lighting Enhanced by Design”

Specifications are subject to change without notice.

1 Watt

= 5 Total Watts

+ -

1 Watt

©2017 GM Lighting

1 Watt

9830 W. 190th Street, Unit F Mokena, IL 60448

1 Watt

Toll-Free: (866) 671-0811 FAX: (708) 478-2640

1 Watt

1 Watt = 4 Total Watts

www.gmlighting.net [email protected] SlimPuckMiniInstallation_082417