installation of sti-6516 mini bopper stopper
GASKET (ADHESIVE BACKING TOWARD DOOR)
Safety Technology International, Inc.
COVER ASSY.
Safety Technology International (Europe) Ltd. SURFACE
2306 Airport Road • Waterford, Michigan 48327-1209 Phone: 248-673-9898 • Fax: 248-673-1246 Toll Free: 800-888-4784 • E-mail: [email protected] Web: www.sti-usa.com
Unit 49G Pipers Road“A” • Park Farm Industrial Estate • Redditch Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only) E-mail: [email protected] • Web: www.sti-europe.com SURFACE “B”
CENTER LINE OF SPACER UP SCREWS #6 x 1 1/4 in. (3) PROVIDED
GASKET (ADHESIVE BACKING TOWARD DOOR)
MAKE SURE SPACER IS INSTALLED AS SHOWN WITH MOUNTING HOLES BELOW CENTER LINE.
2 in.(51mm) 1.5 in. (38mm)
SPACER ORIENTATION TOP VIEW
19018 ANCHOR (3) PROVIDED 1015980 SPACER
3.75 in.(95mm)
COVER ASSEMBLY
SURFACE “A”
3.25 in. 4 in. (82mm) (102mm)
2 in.(51mm)
SURFACE “B”
1.5 in. (38mm)
TOP VIEW 3.625 in.(92mm) 82599 GASKET (ADHESIVE BACKING TOWARD DOOR)
ANCHOR (3) PROVIDED
19039 SCREWS #6 x 1 1/4 in. (3) PROVIDED
FRONT VIEW SPACER
E
LAG
SCH
INSTALLATION NOTES 1. Remove backing paper and center gasket (# 82599) left to right around lock with surface “B” against top of lock. 2. Next center spacer 1015980 with bottom of spacer lying on surface “A” of gasket. 3. Using spacer as template, mark and drill three (3) 3/16 in. DIA. holes. Complete assembly as shown. Optional: if anchors are not required use spacer as template, mark and drill (3) holes using a # 36 drill size.
CLEANING INSTRUCTIONS Rinse cover with water to remove abrasive dust and dirt. Wash with soap or mild detergent using a soft cloth. (DO NOT SCRUB.) Rinse once more, then dry with a soft cloth or chamois. SURFACE To remove grease or wet paint, rub gently with a cloth wetted thoroughly “A” with naphtha, then wash and rinse. (DO NOT USE RAZOR BLADES.)
COVER ASSY.
ADA
Compliant SURFACE “B”
Electronic warranty form at www.sti-usa.com/wc14
ADA
Compliant
INSTALLATION OF STI-6516 MINI BOPPER STOPPER®
All specifications and information shown were current as of publication and are subject to change without notice. 6516IS MAY2006 GASKET (ADHESIVE BACKING TOWARD DOOR)
SCREWS #6 x 1 1/4 in. (3) PROVIDED
Safety Technology International, Inc.
COVER ASSY.
Safety Technology International (Europe) Ltd. SURFACE
2306 Airport Road • Waterford, Michigan 48327-1209 Phone: 248-673-9898 • Fax: 248-673-1246 Toll Free: 800-888-4784 • E-mail: [email protected] Web: www.sti-usa.com
Unit 49G Pipers Road“A” • Park Farm Industrial Estate • Redditch Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only) E-mail: [email protected] • Web: www.sti-europe.com SURFACE “B”
CENTER LINE OF SPACER UP SCREWS #6 x 1 1/4 in. (3) PROVIDED
GASKET (ADHESIVE BACKING TOWARD DOOR)
MAKE SURE SPACER IS INSTALLED AS SHOWN WITH MOUNTING HOLES BELOW CENTER LINE.
2 in.(51mm) 1.5 in. (38mm)
SPACER ORIENTATION TOP VIEW
19018 ANCHOR (3) PROVIDED 1015980 SPACER
3.75 in.(95mm)
COVER ASSEMBLY
SURFACE “A”
3.25 in. 4 in. (82mm) (102mm)
2 in.(51mm)
SURFACE “B”
1.5 in. (38mm)
TOP VIEW 3.625 in.(92mm) 82599 GASKET (ADHESIVE BACKING TOWARD DOOR)
ANCHOR (3) PROVIDED
19039 SCREWS #6 x 1 1/4 in. (3) PROVIDED
FRONT VIEW SPACER
E
LAG
SCH
INSTALLATION NOTES 1. Remove backing paper and center gasket (# 82599) left to right around lock with surface “B” against top of lock. 2. Next center spacer 1015980 with bottom of spacer lying on surface “A” of gasket. 3. Using spacer as template, mark and drill three (3) 3/16 in. DIA. holes. Complete assembly as shown. Optional: if anchors are not required use spacer as template, mark and drill (3) holes using a # 36 drill size.
CLEANING INSTRUCTIONS Rinse cover with water to remove abrasive dust and dirt. Wash with soap or mild detergent using a soft cloth. (DO NOT SCRUB.) Rinse once more, then dry with a soft cloth or chamois. SURFACE To remove grease or wet paint, rub gently with a cloth wetted thoroughly “A” with naphtha, then wash and rinse. (DO NOT USE RAZOR BLADES.)
COVER ASSY.
ADA
Compliant SURFACE “B”
Electronic warranty form at www.sti-usa.com/wc14
ADA
Compliant
INSTALLATION OF STI-6516 MINI BOPPER STOPPER®
All specifications and information shown were current as of publication and are subject to change without notice. 6516IS MAY2006 GASKET (ADHESIVE BACKING TOWARD DOOR)
SCREWS #6 x 1 1/4 in. (3) PROVIDED
