INSTALLATION OF STI-6518 BOPPER STOPPER®
(44mm)
WHEN ELECTRICAL BOX IS SURFACE MOUNTED
Safety Technology International, Inc.
Technology 1015980 SPACER FOR USE WITHSafety GASKET (INCLUDED)
2306 Airport Road • Waterford, Michigan 48327-1209 Phone: 248-673-9898 • Fax: 248-673-1246 Toll Free: 800-888-4784 • E-mail: [email protected] Web: www.sti-usa.com EXISTING SINGLE OFFSET FACING GANG OUTLET BOX REARWARD AS FURNISHED) SHOWN (NOT
OFFSET FACING REARWARD AS SHOWN 102721 (OPTIONAL) USE ADAPTER PLATE WHEN ELECTRICAL BOX IS SURFACE MOUNTED
19054 #6-32 x 1/2 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITH GASKET)
EXISTING SINGLE GANG OUTLET BOX (NOT FURNISHED)
10283 COVER ASSY. 19054 #6-32 x 1/2 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITH GASKET)
102721 (OPTIONAL) USE ADAPTER PLATE WHEN ELECTRICAL BOX IS SURFACE MOUNTED
OFFSET FACING REARWARD GASKET (INCLUDED) AS SHOWN REMOVE ADHESIVE BACKING PAPER GASKET (INCLUDED) 102721 (OPTIONAL) USE ADAPTER PLATE WHEN ELECTRICAL BOX IS SURFACE MOUNTED REMOVE ADHESIVE BACKING PAPER
19054 #6-32 x 1/2 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITH GASKET) 19053 #6-32 x 3/8 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITHOUT GASKET)
19053 #6-32 x 3/8 in. PHIL. PAN HEAD SCREWS 1015980 SPACER FOR USE WITH GASKET (INCLUDED) (3) PROVIDED (USE WITHOUT GASKET)
EXISTING SINGLE GANG OUTLET BOX (NOT FURNISHED)
GASKET (INCLUDED)
19018 ANCHOR (3) PROVIDED
1REMOVE in. (25mm) ADHESIVE BACKING PAPER
NOTE 19018 ANCHOR 1 in. (25mm)EXISTING STOPPER STATION (3) PROVIDED When installing cover, over appliance, 19018 ANCHOR leave 1/4 in. clearance between top 1 in. (25mm)PLACE BOPPER STOPPER (3) PROVIDED 101598 GASKET OVER proper APPLICANCE. surface and hinge to allow INSTALL AFTER COVER ASSY. AND MARK AND DRILL PLACE BOPPERcover STOPPER is lifted. SPACER HAVE BEEN SECURELY FASTENED. clearance when (3) 3/16 in. DIA. HOLES 1 1/8 in. DEEP.
If weather protection is not required, discard gasket and spacer, they are not needed.
1.75 in. (44mm)
5 in. CENT (127mm) OF
5 in. (127mm)
TOP VIEW STI-6518
UP 6.5 in. (165mm)
MAKE SURE SPACER IS SIDE VIEW INSTALLED AS SHOWN WITH MOUNTING HOLESSTI-6518 BELOW CENTER LI
CENTER LINE UP
UP
PRODUCT OF SPACERDIMENSIONS (INSIDE DIMENSIONS)
MAKE SURE SPACER IS INSTALLED AS SHOWN WITH MOUNTING HOLES BELOW CENTER LINE. MAKE SURE SPACER IS INSTALLED AS SHOWN WITH SPACER ORIENTATION MOUNTING HOLES BELOW CENTER LINE.
SPACER ORIENTATION 19039 #6 x 1 1/4 in. PHIL. PAN HEAD SS SCREWS (3) PROVIDED
CENTER LINE OF SPACER UP
1015980 SPACER
UP
10283 COVER ASSY. 19039 #6 x 1 1/4 in. PHIL. PAN HEAD SS SCREWS (3) PROVIDED
19018 ANCHOR (3) PROVIDED
CENTER LINE OF SPACER MAKE SURE SPACER IS INSTALLED AS SHOWN WITH MOUNTING HOLES BELOW CENTER LINE.
SPACER 1015980 ORIENTATION ORIENTATION
MAKE SURE SPACER IS SPACER INSTALLED AS SHOWN WITH MOUNTING HOLES BELOW CENTER LINE.
SPACER ORIENTATION Electronic warranty form at www.sti-usa.com/wc14
19039 #6 x 1 1/4 in. PHIL. PAN HEAD SS SCREWS (3) PROVIDED
INSTALLATION1015980 OFSPACER STI-6518 BOPPER STOPPER®
All specifications and information shown were current as of publication and are subject to change without notice. 6518IS OCT2006
1015980 SPACER
SIDE VIEW STI-6518
SPACER ORIENTATION SIDE VIEW SIDE VIEW CENTER LINE STI-6518 OF SPACER STI-6518
TOP VIEW STI-6518
REMOVE ADHESIVE BAKING PAPER
101598 GASKET INSTALL AFTER COVER ASSY. AND PLACE BOPPER STOPPER SPACER HAVE BEEN SECURELY FASTENED. OVER APPLICANCE. 19018 ANCHOR 101598 GASKET TOP EDGE OF GASKET MUST BUTT AGAINST 1 in. (25mm) MARK AND DRILL (3)AND PROVIDED INSTALL AFTER COVER ASSY. BOTTOM OF SPACER AS SHOWN. (3) 3/16 DIA. SPACER HAVE BEENin.SECURELY FASTENED. HOLES 1/8 in.MUST DEEP. BUTT AGAINST TOP EDGE OF1GASKET PLACE BOPPER STOPPER REMOVE ADHESIVE BOTTOM OF SPACER AS SHOWN. Compliant OVER APPLICANCE. BAKING PAPER MARK AND DRILL REMOVE ADHESIVE (3) 3/16 in. DIA. BAKING PAPER HOLES 1 1/8 in. DEEP.
ADA
(3) PROVIDED (USE WITHOUT GASKET)
TOP EDGE OF GASKET MUST BUTT AGAINST BOTTOM OF SPACER AS SHOWN. 1015980 SPACER
EXISTING STOPPER STATION
1 in. (25mm) EXISTING STOPPER STATION
19053 #6-32 x 3/8 in.
6.5 in. (165mm)
TOP VIEW VIEW TOP STI-6518 STI-6518 SIDE VIEW STI-6518
3.25 in. (82.5mm)
3.25 in. (82.5mm)
(12 651
6518 Isometric.e
1.75 in. (44mm)
PHIL. PANMOUNT HEAD SCREWS TYPICAL FLUSH INSTALLATION
19053 #6-32 x 3/8 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITHOUT GASKET) 1015980 SPACER
PLACE BOPPER STOPPER GASKET (INCLUDED) OVER APPLICANCE. REMOVE ADHESIVE MARK AND DRILL BACKING PAPER (3) 3/16 in. DIA. HOLES 1 1/8 in. DEEP.
OVER APPLICANCE. MARK AND DRILL (3) 3/16 in. DIA. HOLES 1 1/8 in. DEEP.
19054 #6-32 x 1/2 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITH GASKET)
5
TOP VIEW STI-6518
19054 #6-32 x 1/2 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITH GASKET)
10283 COVER ASSY.
TOP VIEW STI-6518
3.25 in. 5 in. (82.5mm) (127mm)
3.25 in. (82.5mm)
10283 COVER ASSY. 1015980 SPACER FOR USE WITH GASKET (INCLUDED) EXISTING SINGLE GANG OUTLET BOX (NOT FURNISHED)
(82.5mm)
1.75 in. (44mm)
19053 #6-32 x 3/8 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITHOUT GASKET)
1015980 SPACER FOR USE WITH GASKET (INCLUDED) REMOVE ADHESIVE BACKING PAPER 1015980 SPACER FOR USE WITH GASKET (INCLUDED) 10283 COVER ASSY.
OFFSET FACING REARWARD AS SHOWN
65183.25Isomet in.
1.75 in. (44mm)
TYPICAL SURFACE MOUNT INSTALLATION
102721 (OPTIONAL) USE ADAPTER PLATE WHEN ELECTRICAL BOX IS SURFACE MOUNTED GASKET (INCLUDED)
EXISTING SINGLE GANG OUTLET BOX (NOT FURNISHED)
International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only) 10283 COVER ASSY. E-mail: [email protected] • Web: www.sti-europe.com
10283 COVER ASSY.
WHEN ELECTRICAL BOX IS SURFACE MOUNTED
Safety Technology International, Inc.
Technology 1015980 SPACER FOR USE WITHSafety GASKET (INCLUDED)
2306 Airport Road • Waterford, Michigan 48327-1209 Phone: 248-673-9898 • Fax: 248-673-1246 Toll Free: 800-888-4784 • E-mail: [email protected] Web: www.sti-usa.com EXISTING SINGLE OFFSET FACING GANG OUTLET BOX REARWARD AS FURNISHED) SHOWN (NOT
OFFSET FACING REARWARD AS SHOWN 102721 (OPTIONAL) USE ADAPTER PLATE WHEN ELECTRICAL BOX IS SURFACE MOUNTED
19054 #6-32 x 1/2 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITH GASKET)
EXISTING SINGLE GANG OUTLET BOX (NOT FURNISHED)
10283 COVER ASSY. 19054 #6-32 x 1/2 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITH GASKET)
102721 (OPTIONAL) USE ADAPTER PLATE WHEN ELECTRICAL BOX IS SURFACE MOUNTED
OFFSET FACING REARWARD GASKET (INCLUDED) AS SHOWN REMOVE ADHESIVE BACKING PAPER GASKET (INCLUDED) 102721 (OPTIONAL) USE ADAPTER PLATE WHEN ELECTRICAL BOX IS SURFACE MOUNTED REMOVE ADHESIVE BACKING PAPER
19054 #6-32 x 1/2 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITH GASKET) 19053 #6-32 x 3/8 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITHOUT GASKET)
19053 #6-32 x 3/8 in. PHIL. PAN HEAD SCREWS 1015980 SPACER FOR USE WITH GASKET (INCLUDED) (3) PROVIDED (USE WITHOUT GASKET)
EXISTING SINGLE GANG OUTLET BOX (NOT FURNISHED)
GASKET (INCLUDED)
19018 ANCHOR (3) PROVIDED
1REMOVE in. (25mm) ADHESIVE BACKING PAPER
NOTE 19018 ANCHOR 1 in. (25mm)EXISTING STOPPER STATION (3) PROVIDED When installing cover, over appliance, 19018 ANCHOR leave 1/4 in. clearance between top 1 in. (25mm)PLACE BOPPER STOPPER (3) PROVIDED 101598 GASKET OVER proper APPLICANCE. surface and hinge to allow INSTALL AFTER COVER ASSY. AND MARK AND DRILL PLACE BOPPERcover STOPPER is lifted. SPACER HAVE BEEN SECURELY FASTENED. clearance when (3) 3/16 in. DIA. HOLES 1 1/8 in. DEEP.
If weather protection is not required, discard gasket and spacer, they are not needed.
1.75 in. (44mm)
5 in. CENT (127mm) OF
5 in. (127mm)
TOP VIEW STI-6518
UP 6.5 in. (165mm)
MAKE SURE SPACER IS SIDE VIEW INSTALLED AS SHOWN WITH MOUNTING HOLESSTI-6518 BELOW CENTER LI
CENTER LINE UP
UP
PRODUCT OF SPACERDIMENSIONS (INSIDE DIMENSIONS)
MAKE SURE SPACER IS INSTALLED AS SHOWN WITH MOUNTING HOLES BELOW CENTER LINE. MAKE SURE SPACER IS INSTALLED AS SHOWN WITH SPACER ORIENTATION MOUNTING HOLES BELOW CENTER LINE.
SPACER ORIENTATION 19039 #6 x 1 1/4 in. PHIL. PAN HEAD SS SCREWS (3) PROVIDED
CENTER LINE OF SPACER UP
1015980 SPACER
UP
10283 COVER ASSY. 19039 #6 x 1 1/4 in. PHIL. PAN HEAD SS SCREWS (3) PROVIDED
19018 ANCHOR (3) PROVIDED
CENTER LINE OF SPACER MAKE SURE SPACER IS INSTALLED AS SHOWN WITH MOUNTING HOLES BELOW CENTER LINE.
SPACER 1015980 ORIENTATION ORIENTATION
MAKE SURE SPACER IS SPACER INSTALLED AS SHOWN WITH MOUNTING HOLES BELOW CENTER LINE.
SPACER ORIENTATION Electronic warranty form at www.sti-usa.com/wc14
19039 #6 x 1 1/4 in. PHIL. PAN HEAD SS SCREWS (3) PROVIDED
INSTALLATION1015980 OFSPACER STI-6518 BOPPER STOPPER®
All specifications and information shown were current as of publication and are subject to change without notice. 6518IS OCT2006
1015980 SPACER
SIDE VIEW STI-6518
SPACER ORIENTATION SIDE VIEW SIDE VIEW CENTER LINE STI-6518 OF SPACER STI-6518
TOP VIEW STI-6518
REMOVE ADHESIVE BAKING PAPER
101598 GASKET INSTALL AFTER COVER ASSY. AND PLACE BOPPER STOPPER SPACER HAVE BEEN SECURELY FASTENED. OVER APPLICANCE. 19018 ANCHOR 101598 GASKET TOP EDGE OF GASKET MUST BUTT AGAINST 1 in. (25mm) MARK AND DRILL (3)AND PROVIDED INSTALL AFTER COVER ASSY. BOTTOM OF SPACER AS SHOWN. (3) 3/16 DIA. SPACER HAVE BEENin.SECURELY FASTENED. HOLES 1/8 in.MUST DEEP. BUTT AGAINST TOP EDGE OF1GASKET PLACE BOPPER STOPPER REMOVE ADHESIVE BOTTOM OF SPACER AS SHOWN. Compliant OVER APPLICANCE. BAKING PAPER MARK AND DRILL REMOVE ADHESIVE (3) 3/16 in. DIA. BAKING PAPER HOLES 1 1/8 in. DEEP.
ADA
(3) PROVIDED (USE WITHOUT GASKET)
TOP EDGE OF GASKET MUST BUTT AGAINST BOTTOM OF SPACER AS SHOWN. 1015980 SPACER
EXISTING STOPPER STATION
1 in. (25mm) EXISTING STOPPER STATION
19053 #6-32 x 3/8 in.
6.5 in. (165mm)
TOP VIEW VIEW TOP STI-6518 STI-6518 SIDE VIEW STI-6518
3.25 in. (82.5mm)
3.25 in. (82.5mm)
(12 651
6518 Isometric.e
1.75 in. (44mm)
PHIL. PANMOUNT HEAD SCREWS TYPICAL FLUSH INSTALLATION
19053 #6-32 x 3/8 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITHOUT GASKET) 1015980 SPACER
PLACE BOPPER STOPPER GASKET (INCLUDED) OVER APPLICANCE. REMOVE ADHESIVE MARK AND DRILL BACKING PAPER (3) 3/16 in. DIA. HOLES 1 1/8 in. DEEP.
OVER APPLICANCE. MARK AND DRILL (3) 3/16 in. DIA. HOLES 1 1/8 in. DEEP.
19054 #6-32 x 1/2 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITH GASKET)
5
TOP VIEW STI-6518
19054 #6-32 x 1/2 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITH GASKET)
10283 COVER ASSY.
TOP VIEW STI-6518
3.25 in. 5 in. (82.5mm) (127mm)
3.25 in. (82.5mm)
10283 COVER ASSY. 1015980 SPACER FOR USE WITH GASKET (INCLUDED) EXISTING SINGLE GANG OUTLET BOX (NOT FURNISHED)
(82.5mm)
1.75 in. (44mm)
19053 #6-32 x 3/8 in. PHIL. PAN HEAD SCREWS (3) PROVIDED (USE WITHOUT GASKET)
1015980 SPACER FOR USE WITH GASKET (INCLUDED) REMOVE ADHESIVE BACKING PAPER 1015980 SPACER FOR USE WITH GASKET (INCLUDED) 10283 COVER ASSY.
OFFSET FACING REARWARD AS SHOWN
65183.25Isomet in.
1.75 in. (44mm)
TYPICAL SURFACE MOUNT INSTALLATION
102721 (OPTIONAL) USE ADAPTER PLATE WHEN ELECTRICAL BOX IS SURFACE MOUNTED GASKET (INCLUDED)
EXISTING SINGLE GANG OUTLET BOX (NOT FURNISHED)
International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only) 10283 COVER ASSY. E-mail: [email protected] • Web: www.sti-europe.com
10283 COVER ASSY.
