Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231. Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231. Strut Systems
• Electrical porcelain has an dielectric strength of 50 volts/mil
• Electrical porcelain has an dielectric strength of 50 volts/mil • Designed for use with B449 Brackets x
A
x
R
A 3”
21/4”
(76.2)
(57.1)
Wt./C
Wt./C Part No. B4050 B4051
A 3” 4”
R (76.2)
13/8”
(34.9)
(101.6)
21/8”
(54.0)
R
Lbs.
Part No.
kg
A
B4094 B4095
72 (32.6) 100 (45.3)
R
27/8”
(73.0)
37/8”
(98.4)
Lbs.
kg
13/8”
(34.9) 67 (30.4) 21/8” (54.0) 106 (48.1)
B4037B 1/4” (6.3) x 4” (101.6)
B4035A THRU B4035F 4” (101.6) BUS BAR MAPLE CLAMPS
BUS BAR SEPARATOR • Wt./C 9 Lbs. (4.1 kg)
• Assembly Includes: 1 pr. Maple Clamps (Paraffin Impregnated) 3 pcs. 1/2” Flat Washers 3 pcs. N225WO 3 pcs. SQN-1/2” 3 pcs. ATR-1/2 x L (Length) • Required number of Separators • 1/4” (6.3) x 2” (50.8) and 1/4” (6.3) x 6” (152.4) Bus Bar Maple Clamps available
47/16” (112.7)
15/8”
Electrical Accessories
(41.3)
A
31/2” (88.9) 1/4” (6.3)
C B
Part No. B4035A B4035B B4035C B4035D B4035E B4035F
A
73/8”
B
(187.3)
81/2” 91/2” 101/2” 111/2” 121/2” 131/2”
C (215.9)
1/4”
(6.3)
(241.3)
3/4”
(19.0)
(266.7)
11/4” 13/4” 21/4” 23/4”
(31.7)
(292.1) (317.5) (342.9)
(44.4) (57.1) (69.8)
No. of Bus Separators
No. of Bars Per Leg
Lbs.
Wt./C kg
– 2 4 6 8 10
1 2 3 4 5 6
416 447 479 511 542 574
(188.7) (202.7) (217.3) (231.8) (245.8) (260.3)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
174
Strut Systems
Maple Clamps B4000 THRU B4007 MAPLE CABLE CLAMPS • Assembly Includes: 1 pr. Maple Clamps (Paraffin Impregnated) 1 pr. zinc plated Steel Pipe Straps with Everdur Hardware (Silicon Bronze) • Everdur hardware is non-ferrous and prevents magnetic induction
Specify Hole Dia.
Note: Maple cable clamps may be replaced with Insulclamps™ see page 173 for sizes
Part No. B4000 B4001 B4002 B4003 B4004 B4005 B4006 B4007
Specify Hole Dia. 0” to 5/8” (0.0 to 15.9) 1/2” to 1” (12.7 to 25.4) 3/4” to 11/2” (19.0 to 38.1) 11/4” to 13/4” (31.7 to 44.4) 11/2” to 21/4” (38.1 to 57.1) 2” to 21/2” (50.8 to 63.5) 21/4” to 3” (38.1 to 76.2) 3” to 4” (76.2 to 101.6)
0” to 1” 1” to 11/2” 11/2” to 2” 2” to 21/2” 21/2” to 3” 3” to 31/2” 31/2” to 4” 4” to 41/2” 41/2” to 5” 5” to 6”
(0.0 to 25.4) (25.4 to 38.1) (38.1 to 50.8) (50.8 to 63.5) (63.5 to 76.2) (76.2 to 88.9) (88.9 to 101.6) (101.6 to 114.3) (114.3 to 127.0) (127.0 to 152.4)