Jatco/Nissan JF010E (REOF09A), JF011E (REOF10A) - cloudfront.net

T R A N S M IS S ION PART S Instructions

Oversized Primary Pressure Regulator Valve Kit

Jatco/Nissan JF010E (REOF09A), JF011E (REOF10A) JF010E Main Valve Body

R

Part No.

EQ

D

TOOL

UIRE

113741-09K

Valve

• Valve • Spring • End Plug

Tool Kit

Spring Tool KIt

End Plug

Part No.

F-113741-TL9

• Reamer • Reamer Jig • Guide Pin NOTE: Sonnax “F-Tool” kits designed to service a specific bore require the VB-FIX, a self-aligning valve body reaming fixture. More information and instructions can be found online at www.sonnax.com.

1. Disassembly a. Remove and discard OE valve, spring and end plug. b. Set aside OE retainer for reuse. 2. Bore Reaming Ream primary pressure regulator bore (for reaming instructions/reamer care, please visit www.sonnax.com). Sonnax reaming tool kit F-113741-TL9 and VB-FIX are required for this operation. 3. Installation & Assembly a. Remove all debris from the valve bore and body. b. Install Sonnax valve. c. Install Sonnax spring. d. Install Sonnax end plug, with the boss end of plug inboard. Ensure spring seats over end plug boss. e. Reinstall OE retaining clip. 4. Final Testing Vacuum testing at the port(s) indicated holds the recommended minimum 18 in-Hg.

©2015 Sonnax Industries, Inc. 800-843-2600 • 802-463-9722 • F: 802-463-4059 • www.sonnax.com

JF011E Main Valve Body

20

15

10

25

5

0 30 VACUUM TEST

18"-Hg

JF010E Main Valve Body

20

15

10

25

5

0 30 VACUUM TEST

18"-Hg

JF011E Main Valve Body

113741-09K-IN 12-14-15