JOHN DEERE XP MODELS SSTUBE INSTALL Installation Steps:

JOHN DEERE XP MODELS SSTUBE INSTALL INSTALLATION GUIDE – PART #20123 – FOR 1700 CCS MODELS WITH NEW STYLE XP ROW UNITS (1720 STACKER MODEL SHOWN) (Read Instructions Completely before Beginning Installation)

Installation Steps: Before you begin, verify the “package contents” to ensure all items are included.

Step #1: UNLATCH SEED METER ASSEMBLY UNIT AND PLACE ASIDE

Step #2: REMOVE BLACK PLASTIC BOOT & INSERT STAINLESS STEEL TUBE AND ALINE IT WITH THE PRE-EXISTING THREADED HOLE.



WWW.AGXCEL.COM

877-218-1981 [email protected]

Step #3: JOHN DEERE OFFERS TWO OPTIONS FOR THE PART SHOWN BELOW. IF THE BLACK HARD PLASTIC PIECE IS USED YOU WILL HAVE TO DRILL A HOLE THROUGH THE DIVOT AND USE A METRIC JD BOLT (PN #19M7785 NOT INCLUDED). SOME MODELS HAVE THE METAL PLATE (JD PN # A71965) AND METRIC BOLT.

Step #4: ADJUST YOUR LATCH DOWN CLAMP BY TURNING THE “J” HOOK OUT ONE FULL TURN

Step #5: OPTIONAL: CUT A SLIT IN THE RUBBER SEAL SO THAT IT SEALS AROUND THE TUBE NEATLY, WHILE RE-INSTALLING SEED CONTROL UNIT. OPTIONAL: INSERT 1\4” POLY TUBING AND CUT TO DESIRED LENGTH FOR BETTER IN FURROW FERTILIZER PLACEMENT (REBOUNDER IS OPTIONAL)

WWW.AGXCEL.COM

877-218-1981 [email protected]