Keurig B60 Puncture Needle Replacement

Keurig B60 Puncture Needle Replacement

Keurig B60 Puncture Needle Replacement This guide demonstrates how to remove and replace a clogged or damaged puncture needle.

Written By: Jake Wynn

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 7

Keurig B60 Puncture Needle Replacement

INTRODUCTION Replacing the Puncture Needle is similar to the Handle Replacement, but requires a couple extra steps outlined below.

TOOLS: T15 Torx Screwdriver (1) Phillips #1 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 7

Keurig B60 Puncture Needle Replacement

Step 1 — Handle 

Lift the handle

Step 2



Locate and remove the two 9.5 mm Torx T15 screws on both sides of the handle.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 7

Keurig B60 Puncture Needle Replacement

Step 3



Remove the broken handle and replace with the new one

Step 4 — Puncture Needle

© iFixit — CC BY-NC-SA

www.iFixit.com



Locate and remove the two 9.5 mm Phillips #1 screws.



Remove the plastic ring around the K-Cup Pack Holder

Page 4 of 7

Keurig B60 Puncture Needle Replacement

Step 5 

Remove the two 9.5 mm Phillips #1 screws on the underside of the lid.

Step 6



Detach the lid from the Keurig.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 7

Keurig B60 Puncture Needle Replacement

Step 7 

Locate and remove the two 9.5 mm Phillips #1 screws on the top of the puncture needle.

Step 8



Squeeze and pull on the hose to remove it from the Puncture Needle



Puncture needle should now be exposed

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 6 of 7

Keurig B60 Puncture Needle Replacement

Step 9



Remove the Puncture Needle Assembly from Keurig

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-28 08:36:58 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 7 of 7