Keurig B60 Power Cord Replacement

Keurig B60 Power Cord Replacement

Keurig B60 Power Cord Replacement This guide demonstrates how to replace a faulty power cord.

Written By: Jake Wynn

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Keurig B60 Power Cord Replacement

INTRODUCTION This replacement involves removal of the bottom panel. Certain tools are required.

TOOLS: Phillips #1 Screwdriver (1) Flush Wire Cutters (1) Portable Soldering Iron (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Keurig B60 Power Cord Replacement

Step 1 — Power Cord



Ensure Keurig is powered off and unplugged.



Turn the Keurig over, and unscrew five 25.5 mm Phillip #1 screws, and remove bottom panel.

Step 2



Unwind the Power Cord from the wire channel

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Keurig B60 Power Cord Replacement

Step 3



Make three cuts along the wires shown



Solder the Power Cord Replacement to the same wire attachments

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-14 12:27:44 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4