Kyocera Opal S14 Display Panel Replacement

Kyocera Opal S14 Display Panel Replacement

Kyocera Opal S14 Display Panel Replacement This device page will show how to remove the front screen on the Kyocera Opal S14

Written By: Kimberlyn

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Kyocera Opal S14 Display Panel Replacement

INTRODUCTION Before beginning the project necessary tools needed will be a #00 screwdriver and flat prying device. You need to be prepared to collect the tiny screws that will be removed.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Kyocera Opal S14 Display Panel Replacement

Step 1 — Display Panel 

Open phone

Step 2



Remove the four tiny front screen screws with a screw driver

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Kyocera Opal S14 Display Panel Replacement

Step 3



Use prying tool to open the side of the screen and work you way around the screen.

Step 4



Carefully remove screen after prying it lose, exposing the bottom screen and parts

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-25 08:33:55 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Kyocera Opal S14 Display Panel Replacement

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5