low voltage relay station - din - Vantage Controls
LOW VOLTAGE RELAY STATION - DIN Load Controls
The Vantage DIN Low Voltage Relay Station is a powerful control point for systems or devices that operate through low voltage relay control. A DIN LVRS includes eight SPDT relays to control devices such as draperies, pumps, garage doors, lifts, screens, pool covers, sprinklers, baths, security systems and more. Each relay corresponds to an individual button on the front of the unit, which allows the connected device to be manually switched. The individual relays “latch” to retain the last state in the event of a power interrupt. Low Voltage Relay Stations, available in WireLink or RadioLink, easily install on standard 35mm DIN rails. The stations communicate with the controller either through a WireLink two-wire bus or wireless RadioLink. Each station can quickly become part of Vantage’s powerful scene orchestration capabilities with user friendly programming software.
Product Highlights • Provides a single integration point for up to eight relay channels • Allows effortless control of devices such as draperies, pumps, garage doors, lifts, screens, pool covers, sprinklers, security systems, and much more • Clips easily on standard 35mm DIN rails • Accepts programming using Vantage’s InFusion Design Center or QLink software • Communicates with the controller via WireLink or RadioLink • Features eight buttons to manually control each relay
Low Voltage Relay Station - DIN RadioLink Low Voltage Relay Station - DIN (STOLER821) with RadioLink
STOLER821
NON POLARIZED
SERIAL NUMBER
9-12V AC/DC 200mA IN
OPEN ENERGY MANAGEMENT EQUIPMENT 51XT
60mm
WireLink Low Voltage Relay Station - DIN (LVRS8-DIN)
STATION BUS CLASS 2
LVRS8-DIN
SERIAL NUMBER OPEN ENERGY MANAGEMENT EQUIPMENT 51XT
SIDE VIEW 96mm
SET
1
2
3
4
5
6
7
8
RESET
COM
8 SET
RESET
COM
7 SET
COM
RESET
STATUS
6 SET
RESET
COM
5 SET
RESET
COM
4 SET
RESET
COM
3 SET
RESET
COM
2 SET
COM
SET
1
RESET
LOW VOLTAGE RELAY STATION 8 - DIN
MAX RATINGS 1AMP 48VAC 30VDC
157mm FRONT VIEW
TOP VIEW
Specifications Dimensions, HWD
86mm x 157mm x 60mm
3.4” x 6.18” x 2.375”
General Specifications Models
LVRS8-DIN (WireLink) / STOLER821 (RadioLink)
Weight
201 g (8.04 oz)
Mounting
35mm DIN Rail (EN 50 022: 1977)
Ambient Operating Humidity
5-95% non-condensing
Ambient Operating Temperature
0°-40° C (32°-104° F)
Lightning Surge Protection Low Voltage
ITU-T K.20
Number of Relay Actuators
8
Number of SPDT Relays
8
Maximum Current at Relay
1A
Maximum Voltage at Relay
48 VAC / 30 VDC
Software Requirements RadioLink
InFusion Design Center or QLink version 4.0 or higher
Software Requirements WireLink
InFusion Design Center or QLink version 3.5 or higher
Station Equivalent InFusion
0.5W on IC-24 / 0.5W on IC-36
Station Equivalent QLink
1 Station on QLink Main Controller
Wiring Specifications Station Bus Wiring Minimum
2 conductor, 16 AWG stranded, non-shielded twisted pair, 30 pF/foot max, UL rated CL2
Station Bus Topology
Any combination of daisy chain or star or branch or home run
RadioLink RF Specifications Station Equivalent
1 RF station
FCC ID#
PII-VSUB075-1
IC
3505A-VSUB0751
Frequency Range
902–928 MHz ISM band
RF Technology
Frequency hopping spread spectrum
Number of Channels
25
System Compatibility InFusion QLink
1061 South 800 East
Orem, Utah 84097
800.555.9891
801.224.0355 fax
www.vantagecontrols.com
The Vantage DIN Low Voltage Relay Station is a powerful control point for systems or devices that operate through low voltage relay control. A DIN LVRS includes eight SPDT relays to control devices such as draperies, pumps, garage doors, lifts, screens, pool covers, sprinklers, baths, security systems and more. Each relay corresponds to an individual button on the front of the unit, which allows the connected device to be manually switched. The individual relays “latch” to retain the last state in the event of a power interrupt. Low Voltage Relay Stations, available in WireLink or RadioLink, easily install on standard 35mm DIN rails. The stations communicate with the controller either through a WireLink two-wire bus or wireless RadioLink. Each station can quickly become part of Vantage’s powerful scene orchestration capabilities with user friendly programming software.
Product Highlights • Provides a single integration point for up to eight relay channels • Allows effortless control of devices such as draperies, pumps, garage doors, lifts, screens, pool covers, sprinklers, security systems, and much more • Clips easily on standard 35mm DIN rails • Accepts programming using Vantage’s InFusion Design Center or QLink software • Communicates with the controller via WireLink or RadioLink • Features eight buttons to manually control each relay
Low Voltage Relay Station - DIN RadioLink Low Voltage Relay Station - DIN (STOLER821) with RadioLink
STOLER821
NON POLARIZED
SERIAL NUMBER
9-12V AC/DC 200mA IN
OPEN ENERGY MANAGEMENT EQUIPMENT 51XT
60mm
WireLink Low Voltage Relay Station - DIN (LVRS8-DIN)
STATION BUS CLASS 2
LVRS8-DIN
SERIAL NUMBER OPEN ENERGY MANAGEMENT EQUIPMENT 51XT
SIDE VIEW 96mm
SET
1
2
3
4
5
6
7
8
RESET
COM
8 SET
RESET
COM
7 SET
COM
RESET
STATUS
6 SET
RESET
COM
5 SET
RESET
COM
4 SET
RESET
COM
3 SET
RESET
COM
2 SET
COM
SET
1
RESET
LOW VOLTAGE RELAY STATION 8 - DIN
MAX RATINGS 1AMP 48VAC 30VDC
157mm FRONT VIEW
TOP VIEW
Specifications Dimensions, HWD
86mm x 157mm x 60mm
3.4” x 6.18” x 2.375”
General Specifications Models
LVRS8-DIN (WireLink) / STOLER821 (RadioLink)
Weight
201 g (8.04 oz)
Mounting
35mm DIN Rail (EN 50 022: 1977)
Ambient Operating Humidity
5-95% non-condensing
Ambient Operating Temperature
0°-40° C (32°-104° F)
Lightning Surge Protection Low Voltage
ITU-T K.20
Number of Relay Actuators
8
Number of SPDT Relays
8
Maximum Current at Relay
1A
Maximum Voltage at Relay
48 VAC / 30 VDC
Software Requirements RadioLink
InFusion Design Center or QLink version 4.0 or higher
Software Requirements WireLink
InFusion Design Center or QLink version 3.5 or higher
Station Equivalent InFusion
0.5W on IC-24 / 0.5W on IC-36
Station Equivalent QLink
1 Station on QLink Main Controller
Wiring Specifications Station Bus Wiring Minimum
2 conductor, 16 AWG stranded, non-shielded twisted pair, 30 pF/foot max, UL rated CL2
Station Bus Topology
Any combination of daisy chain or star or branch or home run
RadioLink RF Specifications Station Equivalent
1 RF station
FCC ID#
PII-VSUB075-1
IC
3505A-VSUB0751
Frequency Range
902–928 MHz ISM band
RF Technology
Frequency hopping spread spectrum
Number of Channels
25
System Compatibility InFusion QLink
1061 South 800 East
Orem, Utah 84097
800.555.9891
801.224.0355 fax
www.vantagecontrols.com
