Mac Pro Late 2013 AirPort Board Replacement

Mac Pro Late 2013 AirPort Board Replacement

Mac Pro Late 2013 AirPort Board Replacement prerequisite to both AirPort Card and Fan

Written By: Andrew Optimus Goldberg

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Mac Pro Late 2013 AirPort Board Replacement

TOOLS: T4 Torx Screwdriver (1) Spudger (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Mac Pro Late 2013 AirPort Board Replacement

Step 1 — AirPort Board 

Remove the three 3.7 mm T4 screws securing the metal cover to the AirPort board bay.



Lift and remove the metal cover from the AirPort board bay.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Mac Pro Late 2013 AirPort Board Replacement

Step 3



Use the tip of a spudger to flip the ZIF retaining tab on the fan assembly ribbon cable connector.



Remove the fan assembly ribbon cable from its ZIF socket.

Step 4



Use the tip of a spudger to flip the ZIF retaining tab on the fan ribbon cable.



Disconnect the fan ribbon cable.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 10:53:09 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4