Mac Pro Late 2013 RAM Replacement
Mac Pro Late 2013 RAM Replacement
Mac Pro Late 2013 RAM Replacement Replace the RAM in your Mac Pro Late 2013.
Written By: Dozuki System
© 2017
guides.crucial.com
Page 1 of 5
Mac Pro Late 2013 RAM Replacement
INTRODUCTION Adding more RAM to your Mac Pro is easy and requires no tools. Use this guide to soup up your Pro.
© 2017
guides.crucial.com
Page 2 of 5
Mac Pro Late 2013 RAM Replacement
Step 1 — RAM
Slide the lock switch to the right, to the unlocked position.
Step 2
Lift the outer case straight up off the Mac Pro.
It may help to push down on the center of the fan while lifting the case up.
© 2017
guides.crucial.com
Page 3 of 5
Mac Pro Late 2013 RAM Replacement
Step 3
Push the RAM release tab up.
The RAM slots will pivot outward to allow access to the RAM modules.
© 2017
guides.crucial.com
Page 4 of 5
Mac Pro Late 2013 RAM Replacement
Step 4
Using two hands, pull the desired RAM module straight out of its slot.
To install new RAM modules, insert a new module into the appropriate slot, in the proper orientation. Press the RAM module into the slot until it is bottomed, then push the RAM tray back into the side of the Mac Pro.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-16 02:37:33 PM.
© 2017
guides.crucial.com
Page 5 of 5
Mac Pro Late 2013 RAM Replacement Replace the RAM in your Mac Pro Late 2013.
Written By: Dozuki System
© 2017
guides.crucial.com
Page 1 of 5
Mac Pro Late 2013 RAM Replacement
INTRODUCTION Adding more RAM to your Mac Pro is easy and requires no tools. Use this guide to soup up your Pro.
© 2017
guides.crucial.com
Page 2 of 5
Mac Pro Late 2013 RAM Replacement
Step 1 — RAM
Slide the lock switch to the right, to the unlocked position.
Step 2
Lift the outer case straight up off the Mac Pro.
It may help to push down on the center of the fan while lifting the case up.
© 2017
guides.crucial.com
Page 3 of 5
Mac Pro Late 2013 RAM Replacement
Step 3
Push the RAM release tab up.
The RAM slots will pivot outward to allow access to the RAM modules.
© 2017
guides.crucial.com
Page 4 of 5
Mac Pro Late 2013 RAM Replacement
Step 4
Using two hands, pull the desired RAM module straight out of its slot.
To install new RAM modules, insert a new module into the appropriate slot, in the proper orientation. Press the RAM module into the slot until it is bottomed, then push the RAM tray back into the side of the Mac Pro.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-16 02:37:33 PM.
© 2017
guides.crucial.com
Page 5 of 5
