Mac Pro Late 2013 Lower Case Replacement

Mac Pro Late 2013 Lower Case Replacement

Mac Pro Late 2013 Lower Case Replacement Replace the Lower Case in your Mac Pro Late 2013.

Written By: Andrew Optimus Goldberg

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Mac Pro Late 2013 Lower Case Replacement

INTRODUCTION Use this guide to remove the bottom of the outer case of your Mac Pro.

TOOLS: T10 Torx Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Mac Pro Late 2013 Lower Case Replacement

Step 1 — Outer Case



Slide the lock switch to the right, to the unlocked position.

Step 2



Lift the outer case straight up off the Mac Pro.

 It may help to push down on the center of the fan while lifting the case up.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Mac Pro Late 2013 Lower Case Replacement

Step 3 — Lower Case

 Flip the Mac Pro upside down, 180 degrees. 

Remove five 5.1 mm T10 Torx screws from the outer perimeter of the lower case.

Step 4



Carefully lift the lower case up and remove it from the Mac Pro.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 05:43:02 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4