MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement

MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement

MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement Remove the lower case to access the internal components of your MacBook Pro.

Written By: Andrew Optimus Goldberg

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement

INTRODUCTION Remove the lower case to access the internal components of your MacBook Pro.

TOOLS:

PARTS:

Phillips #00 Screwdriver (1)

MacBook Pro 13" Unibody Lower Case (1) Macbook Pro 13" and 15" Unibody (Mid 2009 through Mid 2012) Lower Case Screw Set (1) MacBook and MacBook Pro Unibody Rubber Feet (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement

Step 1 — Lower Case 

Remove the following ten screws: 

Three 14.4 mm Phillips #00 screws



Three 3.5 mm Phillips #00 screws



Four 3.5 mm shouldered Phillips #00 screws

Step 2



Use your fingers to pry the lower case away from the body of the MacBook near the vent.



Remove the lower case.

To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement This document was last generated on 2017-06-20 12:45:17 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4