MasterSeries® 870V - American Backflow Products
ES-F-870V
S P E C I F I C AT I O N S H E E T
MasterSeries® 870V
Double Check Valve Assemblies Size: 21⁄2" - 10" (65mm - 250mm) The FEBCO MasterSeries® 870V Double Check Valve Assemblies are designed for non-health hazard applications. Standard orientation is inlet flow vertical up, outlet flow vertical down. Vertical orientation is inlet and outlet flow vertical up.
Materials Main Valve Body:
Ductile iron Grade 65-45-12
Coating:
Fusion epoxy coated internal and external AWWA C550
Shutoff Valves:
NRS and OS&Y resilient wedge gate valves AWWA C509
Trim: Bronze Elastomer Discs:
EPDM
Spring:
Stainless steel
MODEL 870V DOUBLE CHECK ASSEMBLY (Shown in standard orientation)
Pressure – Temperature Max. Working Pressure: 175psi (12.1 bar) Hydrostatic Test Press: 350psi (24.1 bar) Temperature Range: 32°F to 140°F (0°C to 60°C)
Approvals • ANSI/AWWA (C510) Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California. * * 1015
B64.5
* Less gate not FM approved. Less gate not UL Classified unless installed with UL Listed gate valves.
MODEL 870V DOUBLE CHECK ASSEMBLY (Shown in vertical orientation)
Models • Valve Setter with MJ x MJ, MJ x FL, or FL x FL ends • UL/FM OS&Y RW Gate Valves • Wye Strainer • End Connections: Flanged ANSI B16.1 Class 125
Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––– Job Location –––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––– Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––– FEBCO product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact FEBCO. FEBCO reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on FEBCO products previously or subsequently sold.
Series 870V / Materials of Construction
10" Disc Assembly (250mm)
#
Description
1 Body 2 Cover 2.1 O-ring 2.2 Cap Screw 2.3 Hex Nut 2.5 Cover (w/o holes) 3 Seat Ring 3.1 Gasket 4 Arm 4.1 Bushing-Swing Pin 4.2 Swing Pin 5 Retaining Clip 5.1 Retaining Clip 6 Check Disk (21/2" - 8") Seat Disc (10" Only) 6.1 Disc Holder (10" Only) 6.2 Disc Retainer (10" Only) 6.3 Capscrew (10" Only) 7 Load Pin 8 Lower Sprg. Retainer 9 Spring Stem 9.1 Elastic Stop Jam Nut 10 Spring 11 Spring Guide 12 Upper Sprg. Retainer 12.1 Bushing Sprg. Stem
Material
#
Description
Material
A536 GR 65-45-12 A536 GR 65-45-12 EPDM ASTM D2000 Plated Steel Plated Steel A536 GR 65-45-12 B524 Alloy C83600 EPDM ASTM D2000 B584 Alloy C83600 Acetal Resin 304 SS 302 SS 302 SS EPDM Coated GR, 45 Ductile Iron w/ type 304 SS Silicone ASTM D2000 ASTM A743 304 SS ASTM A743 304 SS 18-8 SS 304SS B584 Alloy C83600 304SS 18-8 SS A313 Type 631 SS B130 Alloy C22000 B584 Alloy C83600 Acetal Resin
13 14 15 16 17 18 18.1 19 24 24.1 25
Pivot Bearing Flange Gasket Bearing Socket Hex Jam Nut Capscrew (10" Only) Washer Flange Nut Flange Nut Cover Bolt Washer Nut
B585 Alloy C83600 Rubber/Fabric Acetal Resin 18-8 SS 18-8 SS 302 SS Plated Steel Plated Steel A36 Stl. Epoxy Coated Plated Steel Plated Steel Plated Steel
26 35 35.1 36 40 41 42 43 43.1 45 45.1 47 47.1 60 62 70
Gasket O-ring Back Up Ring Cover Ball Valve Nipple Gate Valve (NRS) Bulkhead Fitting Bulkhead Fitting Gasket Gasket Nut Nut Identification Plate Drive Screw Clamp 870V Only
EPDM ASTM D2000 EPDM ASTM D1999 Acetal Resin B584 Alloy C83600 B584 Alloy C83600 Brass AWWA C509 B584 Alloy C83600 B584 Alloy C83600 EPDM ASTM D2000 EPDM ASTM D2001 B584 Alloy C83601 B584 Allloy C83602 B36 Alloy C26000 Stainless Steel AWWA C606
Model 870V Standard Orientation
Model 870V Vertical Orientation
F C K K
F
C G
A
M
B
G B
Note: The Model 870V is shipped in the standard (N-Shape) orientation as shown above.
NRS Side View J
E E1
Dimensions – Weights Size: 21⁄2" - 10" (65 - 250mm) size (DN)
Dimensions A
in.
mm
in.
21⁄2 3 4 6 8 10
65 121⁄2 80 121⁄2 100 14 150 16 200 181⁄2 250 21
B mm
318 318 356 406 470 533
in.
C mm
253⁄4 654 253⁄4 654 277⁄8 708 321⁄4 819 371⁄2 953 421⁄2 1080
in.
E NRS mm
241⁄4 616 243⁄4 629 263⁄4 680 321⁄4 819 363⁄8 924 403⁄4 1035
E1 OS&Y*
Weight
F
G
J
K
M
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
125⁄8 127⁄8 143⁄8 187⁄8 231⁄2 271⁄2
321 327 365 497 597 699
163/8 221/4 231/4 301/8 373/4 48
416 565 591 765 959 1219
165⁄8 165⁄8 173⁄4 219⁄16 247⁄8 271⁄2
422 422 451 548 632 699
61⁄4 61⁄4 7 8 91⁄4 10
159 159 178 203 235 254
31⁄2 33⁄4 41⁄2 51⁄2 63⁄4 8
89 95 114 140 172 203
135⁄8 141⁄8 151⁄2 185⁄8 203⁄4 24
346 359 394 473 527 610
*OS&Y OPEN Weights do not include risers or optional valve setter. Note: Dimensions shown are nominal. Allowances must be made for normal manufacturing tolerances. Refer to Specification Sheet ES-F-611 for details on valve setter.
in.
NRS mm
lbs
271⁄4 692 190 281⁄4 718 260 31 787 300 371⁄4 946 460 411⁄2 1054 780 48 1219 1320
kgs.
OS&Y lbs.
86 200 118 270 136 320 209 500 354 840 599 1450
kgs.
91 123 145 227 381 658
Typical Installation Standard orientation (Model 870V)
Vertical orientation (Model 870V)
18" (450mm) min
18"min (450mm) 18"min (450mm)
8"min (200mm)
18"min (450mm)
8"min (200mm)
18"min (450mm)
Flow
Pipe Support (furnished by customer) for valve weight only.
4"min (100mm)
4"min (100mm)
Flow
8"min (200mm)
Optional Valve Setter Recommended minimum clearances from permanent structures for ease of testing and maintenance are shown on above drawings.
Capacity
Head Loss (psi)
kPa psi 138 20 124 18 110 16 97 14 83 12 69 10 55 8 41 6 28 4 14 2 0 0
Head Loss (psi)
kPa psi
kPa psi
21⁄2" (65mm)
6" (150mm)
97 14
Head Loss (psi)
83 12 69 10 55 8 41 6 28 4 14 2 0 0 0 200 400 600 800 1000 1200 1400 1600 gpm 0 760 1520 2280 3040 3800 4542 5300 6057 lpm
0 50 100 150 200 250 300 400 450 gpm 0 190 379 570 760 950 1140 1520 1710 lpm
kPa psi
3" (80mm)
8 (200mm)
97 14 83 12 Head Loss (psi)
138 20 124 18 110 16 97 14 83 12 69 10 55 8 41 6 28 4 14 2 0 0
69 10 55 8 41 6 28 4 14 2 0 0
0 50 100 150 200 250 300 350 400 450 500 gpm 0 190 379 570 760 950 1140 1330 1520 1710 1900 lpm
4" (100mm)
138 20 124 18 110 16 97 14 83 12 69 10 55 8 41 6 28 4 14 2 0 0 0 100 200 300 400 500 600 700 800 gpm 0 379 760 1140 1520 1900 2280 2660 3040 lpm
10" (250mm)
97 14 83 12 69 10 55 8 41 6 28 4 14 2 0 0
A-Vertical orientation B-Standard orientation
A Watts Water Technologies Company
0 500 1000 1500 2000 2500 3000 gpm 0 1900 3800 5678 7570 9464 11356 lpm
kPa psi
Head Loss (psi)
Head Loss (psi)
kPa psi
0 1000 2000 3000 4000 5000 gpm 0 3800 7570 11356 15142 18927 lpm
The 6" and 10" flow curves (B-standard orientation) include the FEBCO valve setter Series 611.
USA: Fresno, CA • Tel: (559) 441-5300 • Fax: (559) 441-5301 • www.FEBCOonline.com Canada: Burlington, ON • Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.FEBCOonline.ca
ES-F-870V 1119
© 2011 FEBCO
S P E C I F I C AT I O N S H E E T
MasterSeries® 870V
Double Check Valve Assemblies Size: 21⁄2" - 10" (65mm - 250mm) The FEBCO MasterSeries® 870V Double Check Valve Assemblies are designed for non-health hazard applications. Standard orientation is inlet flow vertical up, outlet flow vertical down. Vertical orientation is inlet and outlet flow vertical up.
Materials Main Valve Body:
Ductile iron Grade 65-45-12
Coating:
Fusion epoxy coated internal and external AWWA C550
Shutoff Valves:
NRS and OS&Y resilient wedge gate valves AWWA C509
Trim: Bronze Elastomer Discs:
EPDM
Spring:
Stainless steel
MODEL 870V DOUBLE CHECK ASSEMBLY (Shown in standard orientation)
Pressure – Temperature Max. Working Pressure: 175psi (12.1 bar) Hydrostatic Test Press: 350psi (24.1 bar) Temperature Range: 32°F to 140°F (0°C to 60°C)
Approvals • ANSI/AWWA (C510) Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California. * * 1015
B64.5
* Less gate not FM approved. Less gate not UL Classified unless installed with UL Listed gate valves.
MODEL 870V DOUBLE CHECK ASSEMBLY (Shown in vertical orientation)
Models • Valve Setter with MJ x MJ, MJ x FL, or FL x FL ends • UL/FM OS&Y RW Gate Valves • Wye Strainer • End Connections: Flanged ANSI B16.1 Class 125
Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––– Job Location –––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––– Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––– FEBCO product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact FEBCO. FEBCO reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on FEBCO products previously or subsequently sold.
Series 870V / Materials of Construction
10" Disc Assembly (250mm)
#
Description
1 Body 2 Cover 2.1 O-ring 2.2 Cap Screw 2.3 Hex Nut 2.5 Cover (w/o holes) 3 Seat Ring 3.1 Gasket 4 Arm 4.1 Bushing-Swing Pin 4.2 Swing Pin 5 Retaining Clip 5.1 Retaining Clip 6 Check Disk (21/2" - 8") Seat Disc (10" Only) 6.1 Disc Holder (10" Only) 6.2 Disc Retainer (10" Only) 6.3 Capscrew (10" Only) 7 Load Pin 8 Lower Sprg. Retainer 9 Spring Stem 9.1 Elastic Stop Jam Nut 10 Spring 11 Spring Guide 12 Upper Sprg. Retainer 12.1 Bushing Sprg. Stem
Material
#
Description
Material
A536 GR 65-45-12 A536 GR 65-45-12 EPDM ASTM D2000 Plated Steel Plated Steel A536 GR 65-45-12 B524 Alloy C83600 EPDM ASTM D2000 B584 Alloy C83600 Acetal Resin 304 SS 302 SS 302 SS EPDM Coated GR, 45 Ductile Iron w/ type 304 SS Silicone ASTM D2000 ASTM A743 304 SS ASTM A743 304 SS 18-8 SS 304SS B584 Alloy C83600 304SS 18-8 SS A313 Type 631 SS B130 Alloy C22000 B584 Alloy C83600 Acetal Resin
13 14 15 16 17 18 18.1 19 24 24.1 25
Pivot Bearing Flange Gasket Bearing Socket Hex Jam Nut Capscrew (10" Only) Washer Flange Nut Flange Nut Cover Bolt Washer Nut
B585 Alloy C83600 Rubber/Fabric Acetal Resin 18-8 SS 18-8 SS 302 SS Plated Steel Plated Steel A36 Stl. Epoxy Coated Plated Steel Plated Steel Plated Steel
26 35 35.1 36 40 41 42 43 43.1 45 45.1 47 47.1 60 62 70
Gasket O-ring Back Up Ring Cover Ball Valve Nipple Gate Valve (NRS) Bulkhead Fitting Bulkhead Fitting Gasket Gasket Nut Nut Identification Plate Drive Screw Clamp 870V Only
EPDM ASTM D2000 EPDM ASTM D1999 Acetal Resin B584 Alloy C83600 B584 Alloy C83600 Brass AWWA C509 B584 Alloy C83600 B584 Alloy C83600 EPDM ASTM D2000 EPDM ASTM D2001 B584 Alloy C83601 B584 Allloy C83602 B36 Alloy C26000 Stainless Steel AWWA C606
Model 870V Standard Orientation
Model 870V Vertical Orientation
F C K K
F
C G
A
M
B
G B
Note: The Model 870V is shipped in the standard (N-Shape) orientation as shown above.
NRS Side View J
E E1
Dimensions – Weights Size: 21⁄2" - 10" (65 - 250mm) size (DN)
Dimensions A
in.
mm
in.
21⁄2 3 4 6 8 10
65 121⁄2 80 121⁄2 100 14 150 16 200 181⁄2 250 21
B mm
318 318 356 406 470 533
in.
C mm
253⁄4 654 253⁄4 654 277⁄8 708 321⁄4 819 371⁄2 953 421⁄2 1080
in.
E NRS mm
241⁄4 616 243⁄4 629 263⁄4 680 321⁄4 819 363⁄8 924 403⁄4 1035
E1 OS&Y*
Weight
F
G
J
K
M
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
125⁄8 127⁄8 143⁄8 187⁄8 231⁄2 271⁄2
321 327 365 497 597 699
163/8 221/4 231/4 301/8 373/4 48
416 565 591 765 959 1219
165⁄8 165⁄8 173⁄4 219⁄16 247⁄8 271⁄2
422 422 451 548 632 699
61⁄4 61⁄4 7 8 91⁄4 10
159 159 178 203 235 254
31⁄2 33⁄4 41⁄2 51⁄2 63⁄4 8
89 95 114 140 172 203
135⁄8 141⁄8 151⁄2 185⁄8 203⁄4 24
346 359 394 473 527 610
*OS&Y OPEN Weights do not include risers or optional valve setter. Note: Dimensions shown are nominal. Allowances must be made for normal manufacturing tolerances. Refer to Specification Sheet ES-F-611 for details on valve setter.
in.
NRS mm
lbs
271⁄4 692 190 281⁄4 718 260 31 787 300 371⁄4 946 460 411⁄2 1054 780 48 1219 1320
kgs.
OS&Y lbs.
86 200 118 270 136 320 209 500 354 840 599 1450
kgs.
91 123 145 227 381 658
Typical Installation Standard orientation (Model 870V)
Vertical orientation (Model 870V)
18" (450mm) min
18"min (450mm) 18"min (450mm)
8"min (200mm)
18"min (450mm)
8"min (200mm)
18"min (450mm)
Flow
Pipe Support (furnished by customer) for valve weight only.
4"min (100mm)
4"min (100mm)
Flow
8"min (200mm)
Optional Valve Setter Recommended minimum clearances from permanent structures for ease of testing and maintenance are shown on above drawings.
Capacity
Head Loss (psi)
kPa psi 138 20 124 18 110 16 97 14 83 12 69 10 55 8 41 6 28 4 14 2 0 0
Head Loss (psi)
kPa psi
kPa psi
21⁄2" (65mm)
6" (150mm)
97 14
Head Loss (psi)
83 12 69 10 55 8 41 6 28 4 14 2 0 0 0 200 400 600 800 1000 1200 1400 1600 gpm 0 760 1520 2280 3040 3800 4542 5300 6057 lpm
0 50 100 150 200 250 300 400 450 gpm 0 190 379 570 760 950 1140 1520 1710 lpm
kPa psi
3" (80mm)
8 (200mm)
97 14 83 12 Head Loss (psi)
138 20 124 18 110 16 97 14 83 12 69 10 55 8 41 6 28 4 14 2 0 0
69 10 55 8 41 6 28 4 14 2 0 0
0 50 100 150 200 250 300 350 400 450 500 gpm 0 190 379 570 760 950 1140 1330 1520 1710 1900 lpm
4" (100mm)
138 20 124 18 110 16 97 14 83 12 69 10 55 8 41 6 28 4 14 2 0 0 0 100 200 300 400 500 600 700 800 gpm 0 379 760 1140 1520 1900 2280 2660 3040 lpm
10" (250mm)
97 14 83 12 69 10 55 8 41 6 28 4 14 2 0 0
A-Vertical orientation B-Standard orientation
A Watts Water Technologies Company
0 500 1000 1500 2000 2500 3000 gpm 0 1900 3800 5678 7570 9464 11356 lpm
kPa psi
Head Loss (psi)
Head Loss (psi)
kPa psi
0 1000 2000 3000 4000 5000 gpm 0 3800 7570 11356 15142 18927 lpm
The 6" and 10" flow curves (B-standard orientation) include the FEBCO valve setter Series 611.
USA: Fresno, CA • Tel: (559) 441-5300 • Fax: (559) 441-5301 • www.FEBCOonline.com Canada: Burlington, ON • Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.FEBCOonline.ca
ES-F-870V 1119
© 2011 FEBCO
