MasterSeries® 880V - American Backflow Products
ES-F-880V
S P E C I F I C AT I O N S H E E T
MasterSeries® 880V
Reduced Pressure Zone Assemblies Size: 21⁄2" - 10" (65mm - 250mm) The FEBCO MasterSeries® 880V Reduced Pressure Zone Assemblies are designed for use in health hazard applications. Standard orientation is inlet flow vertical up, outlet flow vertical down. Vertical orientation is inlet and outlet flow vertical up.
Pressure – Temperature Temperature Range: Max. Working Pressure: Hydrostatic Test Press:
32°F to 140°F (0°C to 60°C) 175psi (12.1 bar) 350psi (24.1 bar)
Materials Main Valve Body:
Ductile iron Grade 65-45-12
Coating:
Fusion epoxy coated internal and external AWWA C550
Shutoff Valves:
NRS and OS&Y resilient wedge gate valves AWWA C509
MODEL 880V REDUCED PRESSURE ZONE ASSEMBLY (Shown in vertical orientation)
Trim: Bronze Elastomer Discs:
EPDM
Spring:
Stainless steel
Approvals – Standards • ANSI/AWWA (C511) • Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California. * 1013
*
B64.4
* Less gate not FM approved. Less gate not UL Classified unless installed with UL Listed gate valves.
MODEL 880V REDUCED PRESSURE ASSEMBLY (Shown in standard orientation)
Models Valve Setter with MJ x MJ, MJ x FL, or FL x FL ends UL/FM OS&Y RW Gate Valves Relief Valve Air Gap Drain Funnel Wye Strainer End Connections: Flanged ANSI B16.1 Class 125
IMPORTANT: INQUIRE WITH GOVERNING AUTHORITIES FOR LOCAL INSTALLATION REQUIREMENTS
Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––– Job Location –––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––– Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––– FEBCO product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact FEBCO. FEBCO reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on FEBCO products previously or subsequently sold.
Model 880V / Materials of Construction
Relief Valve Detail
10" (250mm) Disc Assembly
#
Description
Material
#
Description
Material
#
Description
Material
1 2 2.1 2.2 2.3 2.4 2.5 3 3.1 4 4.1 4.2 5 5.1 6 6.1 6.2 6.3 7 9 9.1 10 10.1 11 12 12.1 13
Body Cover 1st Check O-Ring Capscrew Hex Nut Expansion Pin Cover 2nd Check Seat Ring Gasket Arm Bushing Swg Pin Swing Pin Retaining Clip Hairpin Cotter Check Disk Seat Disk Disk Holder (10") Disk Retainer (10") Capscrew (10") Load Pin Spring Stem Elastic Stop Jam Nut Spring 1st Check Spring 2nd Check Spring Guide Upr Spring Retnr Bushing-Spr. Stem Pivot Bearing
A536 GR 65-45-12 A536 GR 65-45-12 EPDM ASTM D2000 Plated Steel Plated Steel SS A536 GR 65-45-12 B584 Alloy C83600 EPDM ASTM D2000 B584 Alloy C83600 Acetal Resin SS SS SS EPDM Coated GR, 45 Ductile Iron w/ SS Stem
14 15 16 17 18 18.1 20 20.1 20.2 21 22 23 24 24.1 25 27 28 28.1 29 30 31 31.1 32 33 34 34.1 35 35.1
Flange Gasket Bearing Socket Hex Jam Nut Washer Flange Bolt Flange Nut R.V. Cover Bleed Screw Gasket R.V. Body Cover Bolt Elbow RV Mtg Bolt Washer - RV RV Mtg Bolt Lrg. Diaphragm Button Flow Screw RV Spring Stem - RV Main Guide - RV O-Ring - RV Seat Disc - RV Lower Guide Seat Disc O-Ring O-Ring Back-Up Ring
Rubber/Fabric Acetal Resin SS SS Plated Steel Plated Steel Alloy SS HDPE Alloy SS A536 GR 65-45-12 Plated Steel Plated Steel Plated Steel Nitrile ASTM D2000 A240 304 SS Acetal Resin SS Acetal Resin Alloy FDA EPDM EPDM ASTM D2000 Acetal Resin Alloy FDA EPDM Acetal Resin EPDM ASTM D2000
36 37 38 38.1 39 40 41 42 43 43.1 45 45.1 47 50 51 60 62 70
Adaptor Plate Sm. Diaphragm Retainer Slip Ring Flow Washer Ball Valve Nipple Gate Valve Bulkhead Fitting Bulkhead Fitting Gasket Gasket Nut Sensing Line Street Elbow Identification Plate Drive Screw Clamp (880V)
Alloy Nitrile ASTM D2000 Alloy Acetal Resin Acetal Resin Alloy Brass AWWA C509 Alloy Alloy EPDM ASTM D2000 EPDM ASTM D2000 Alloy SAE Hydraulic Hose Alloy Alloy SS AWWA C606
SS SS SS SS SS SS Alloy Acetal Resin Alloy
Model 880V Standard Orientation
Model 880V Vertical Orientation
K
F F
C C
M
K D
H
G
A
D
L
G B
B
Note: The Model 880V is shipped in the standard (NShape) orientation as shown above. Relief Valve Detail Relief shipped on right side (shown) field reversible to left side.
NRS Side View J
E E1
C L
3 1⁄2
4 15⁄16
Dimensions – Weights Size: 21⁄2" - 10" (65 - 80mm) size (DN)
Dimensions A
B
C
D
E NRS
E1 OS&Y*
F
Weight G
H
J
K
L
M
NRS
OS&Y
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 21⁄2 65 121⁄2 318 253⁄4 654 241⁄4 616 415⁄16 125 125⁄8 321 163⁄8 416 165⁄8 422
in. 61⁄4
mm 159
in. 51⁄2
mm 140
in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. 31⁄2 89 135⁄8 346 71⁄4 184 271⁄4 692 210 95 220 100
3
80 121⁄2 318 253⁄4 654 243⁄4 629 57⁄16 138 127⁄8 327 221⁄4 565 165⁄8
422
61⁄4
159
51⁄2
140
33⁄4
4
100
14
356 27 ⁄
451
7
178
6
152
4⁄
114 151⁄2 394 71⁄4 184
6
150
16
406 321⁄4 819 321⁄4 819
765 219⁄16 548
8
203
71⁄2
191
51⁄2
140 185⁄8 473 91⁄2 241 371⁄4 946 480 218 530 240
8
200 181⁄2 470 371⁄2 953 363⁄8 924 99⁄16 243 231⁄2 597 373⁄4 959 247⁄8 632
91⁄4
235
83⁄4
222
63⁄4
172 203⁄4 527 101⁄4 260 411⁄2 1054 810 367 880 399
10
250
10
254
9⁄
248
8
21
78
708 26 ⁄
34
680 6 ⁄
9 16
167 14 ⁄ 365 23 ⁄ 38
89⁄16 218 187⁄8 497 301⁄8
533 42 ⁄ 1080 40 ⁄ 1035 11 ⁄ 292 27 ⁄ 699 12
34
14
12
12
48
591 17 ⁄
34
1219 27 ⁄
*OS&Y OPEN Weights do not include risers or optional valve setter. Note: Dimensions shown are nominal. Allowances must be made for normal manufacturing tolerances. Refer to Specification Sheet ES-F-611 for details on valve setter.
12
699
34
12
95
203
141⁄8 359 71⁄4 184 281⁄4 718 280 127 290 132
24
610 111⁄2 292
31
787 320 145 350 159
48 1219 1350 612 1480 671
Typical Installation Standard orientation (Model 880V)
Vertical orientation (Model 880V)
18" min (450mm)
18" min (450mm) 18" min (450mm)
8" min (200mm)
8" min (200mm)
8" min (200mm)
18" min (450mm)
Flow 4" min (18" with Air Gap Drain, refer to local code)
4" min (100mm)
Pipe Support (furnished by customer) for valve weight only.
Optional Valve Setter
Flow
Recommended minimum clearances from permanent structures for ease of testing and maintenance are shown on above drawings.
Capacity 16 14 12 10 8 6 4 2
B A
0 50 100 150 200 250 300 gpm 0 190 380 570 760 950 1140 lpm
Headloss (psi)
kPa psi 124 110 97 83 69 55 41 28
138 124 110 97 83 69 55 41 28
A-Vertical orientation B-Standard orientation
6" (150mm)
18 18 16 16 B 14 14 12 12 10 10 8 8 A 6 6 44 0 200 400 600 800 1000 1200 1400 gpm 0 200 400 600 800 1000 1200 1400 0 760 1520 2280 3040 3800 4540 5300 lpm
8" (200mm)
20 20 A 18 18 16 16 14 14 12 B 12 10 10 8 8 6 6 4 4 0 500 1000 1500 2000 2500 3000 gpm 0 1900 3800 5680 7560 9500 3000 11350 lpm 0 500 1000 1500 2000 2500
kPa psi
4" (100mm)
18 16 A 14 B 12 10 8 6 4 2 0 100 200 300 400 500 600 700 gpm 0 380 760 1140 1520 1900 2280 2660 lpm
A Watts Water Technologies Company
124 110 97 83 69 55 41 28
kPa psi
Headloss (psi)
Headloss (psi)
3" (80mm)
18 A 16 14 12 B 10 8 6 4 0 50 100 150 200 250 300 350 400 450 gpm 0 190 380 570 760 950 1140 1330 1520 1710 lpm
kPa psi 124 110 97 83 69 55 41 28 14
kPa psi
21⁄2" (65mm) Headloss (psi)
110 97 83 69 55 41 28 14
Headloss (psi)
Headloss (psi)
kPa psi
138 20
10" (250mm)
A
110 16
B
83 12 55 8 28 4 0 0
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 gpm 0 1900 3800 5680 7560 9500 11350 13250 15140 17030 18900 lpm
The 6" and 10" flow curves (B-standard orientation) include the FEBCO valve setter model 611.
USA: Fresno, CA • Tel: (559) 441-5300 • Fax: (559) 441-5301 • www.FEBCOonline.com Canada: Burlington, ON • Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.FEBCOonline.ca
ES-F-880V 1119
© 2011 FEBCO
S P E C I F I C AT I O N S H E E T
MasterSeries® 880V
Reduced Pressure Zone Assemblies Size: 21⁄2" - 10" (65mm - 250mm) The FEBCO MasterSeries® 880V Reduced Pressure Zone Assemblies are designed for use in health hazard applications. Standard orientation is inlet flow vertical up, outlet flow vertical down. Vertical orientation is inlet and outlet flow vertical up.
Pressure – Temperature Temperature Range: Max. Working Pressure: Hydrostatic Test Press:
32°F to 140°F (0°C to 60°C) 175psi (12.1 bar) 350psi (24.1 bar)
Materials Main Valve Body:
Ductile iron Grade 65-45-12
Coating:
Fusion epoxy coated internal and external AWWA C550
Shutoff Valves:
NRS and OS&Y resilient wedge gate valves AWWA C509
MODEL 880V REDUCED PRESSURE ZONE ASSEMBLY (Shown in vertical orientation)
Trim: Bronze Elastomer Discs:
EPDM
Spring:
Stainless steel
Approvals – Standards • ANSI/AWWA (C511) • Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California. * 1013
*
B64.4
* Less gate not FM approved. Less gate not UL Classified unless installed with UL Listed gate valves.
MODEL 880V REDUCED PRESSURE ASSEMBLY (Shown in standard orientation)
Models Valve Setter with MJ x MJ, MJ x FL, or FL x FL ends UL/FM OS&Y RW Gate Valves Relief Valve Air Gap Drain Funnel Wye Strainer End Connections: Flanged ANSI B16.1 Class 125
IMPORTANT: INQUIRE WITH GOVERNING AUTHORITIES FOR LOCAL INSTALLATION REQUIREMENTS
Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––– Job Location –––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––– Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––– FEBCO product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact FEBCO. FEBCO reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on FEBCO products previously or subsequently sold.
Model 880V / Materials of Construction
Relief Valve Detail
10" (250mm) Disc Assembly
#
Description
Material
#
Description
Material
#
Description
Material
1 2 2.1 2.2 2.3 2.4 2.5 3 3.1 4 4.1 4.2 5 5.1 6 6.1 6.2 6.3 7 9 9.1 10 10.1 11 12 12.1 13
Body Cover 1st Check O-Ring Capscrew Hex Nut Expansion Pin Cover 2nd Check Seat Ring Gasket Arm Bushing Swg Pin Swing Pin Retaining Clip Hairpin Cotter Check Disk Seat Disk Disk Holder (10") Disk Retainer (10") Capscrew (10") Load Pin Spring Stem Elastic Stop Jam Nut Spring 1st Check Spring 2nd Check Spring Guide Upr Spring Retnr Bushing-Spr. Stem Pivot Bearing
A536 GR 65-45-12 A536 GR 65-45-12 EPDM ASTM D2000 Plated Steel Plated Steel SS A536 GR 65-45-12 B584 Alloy C83600 EPDM ASTM D2000 B584 Alloy C83600 Acetal Resin SS SS SS EPDM Coated GR, 45 Ductile Iron w/ SS Stem
14 15 16 17 18 18.1 20 20.1 20.2 21 22 23 24 24.1 25 27 28 28.1 29 30 31 31.1 32 33 34 34.1 35 35.1
Flange Gasket Bearing Socket Hex Jam Nut Washer Flange Bolt Flange Nut R.V. Cover Bleed Screw Gasket R.V. Body Cover Bolt Elbow RV Mtg Bolt Washer - RV RV Mtg Bolt Lrg. Diaphragm Button Flow Screw RV Spring Stem - RV Main Guide - RV O-Ring - RV Seat Disc - RV Lower Guide Seat Disc O-Ring O-Ring Back-Up Ring
Rubber/Fabric Acetal Resin SS SS Plated Steel Plated Steel Alloy SS HDPE Alloy SS A536 GR 65-45-12 Plated Steel Plated Steel Plated Steel Nitrile ASTM D2000 A240 304 SS Acetal Resin SS Acetal Resin Alloy FDA EPDM EPDM ASTM D2000 Acetal Resin Alloy FDA EPDM Acetal Resin EPDM ASTM D2000
36 37 38 38.1 39 40 41 42 43 43.1 45 45.1 47 50 51 60 62 70
Adaptor Plate Sm. Diaphragm Retainer Slip Ring Flow Washer Ball Valve Nipple Gate Valve Bulkhead Fitting Bulkhead Fitting Gasket Gasket Nut Sensing Line Street Elbow Identification Plate Drive Screw Clamp (880V)
Alloy Nitrile ASTM D2000 Alloy Acetal Resin Acetal Resin Alloy Brass AWWA C509 Alloy Alloy EPDM ASTM D2000 EPDM ASTM D2000 Alloy SAE Hydraulic Hose Alloy Alloy SS AWWA C606
SS SS SS SS SS SS Alloy Acetal Resin Alloy
Model 880V Standard Orientation
Model 880V Vertical Orientation
K
F F
C C
M
K D
H
G
A
D
L
G B
B
Note: The Model 880V is shipped in the standard (NShape) orientation as shown above. Relief Valve Detail Relief shipped on right side (shown) field reversible to left side.
NRS Side View J
E E1
C L
3 1⁄2
4 15⁄16
Dimensions – Weights Size: 21⁄2" - 10" (65 - 80mm) size (DN)
Dimensions A
B
C
D
E NRS
E1 OS&Y*
F
Weight G
H
J
K
L
M
NRS
OS&Y
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm 21⁄2 65 121⁄2 318 253⁄4 654 241⁄4 616 415⁄16 125 125⁄8 321 163⁄8 416 165⁄8 422
in. 61⁄4
mm 159
in. 51⁄2
mm 140
in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. 31⁄2 89 135⁄8 346 71⁄4 184 271⁄4 692 210 95 220 100
3
80 121⁄2 318 253⁄4 654 243⁄4 629 57⁄16 138 127⁄8 327 221⁄4 565 165⁄8
422
61⁄4
159
51⁄2
140
33⁄4
4
100
14
356 27 ⁄
451
7
178
6
152
4⁄
114 151⁄2 394 71⁄4 184
6
150
16
406 321⁄4 819 321⁄4 819
765 219⁄16 548
8
203
71⁄2
191
51⁄2
140 185⁄8 473 91⁄2 241 371⁄4 946 480 218 530 240
8
200 181⁄2 470 371⁄2 953 363⁄8 924 99⁄16 243 231⁄2 597 373⁄4 959 247⁄8 632
91⁄4
235
83⁄4
222
63⁄4
172 203⁄4 527 101⁄4 260 411⁄2 1054 810 367 880 399
10
250
10
254
9⁄
248
8
21
78
708 26 ⁄
34
680 6 ⁄
9 16
167 14 ⁄ 365 23 ⁄ 38
89⁄16 218 187⁄8 497 301⁄8
533 42 ⁄ 1080 40 ⁄ 1035 11 ⁄ 292 27 ⁄ 699 12
34
14
12
12
48
591 17 ⁄
34
1219 27 ⁄
*OS&Y OPEN Weights do not include risers or optional valve setter. Note: Dimensions shown are nominal. Allowances must be made for normal manufacturing tolerances. Refer to Specification Sheet ES-F-611 for details on valve setter.
12
699
34
12
95
203
141⁄8 359 71⁄4 184 281⁄4 718 280 127 290 132
24
610 111⁄2 292
31
787 320 145 350 159
48 1219 1350 612 1480 671
Typical Installation Standard orientation (Model 880V)
Vertical orientation (Model 880V)
18" min (450mm)
18" min (450mm) 18" min (450mm)
8" min (200mm)
8" min (200mm)
8" min (200mm)
18" min (450mm)
Flow 4" min (18" with Air Gap Drain, refer to local code)
4" min (100mm)
Pipe Support (furnished by customer) for valve weight only.
Optional Valve Setter
Flow
Recommended minimum clearances from permanent structures for ease of testing and maintenance are shown on above drawings.
Capacity 16 14 12 10 8 6 4 2
B A
0 50 100 150 200 250 300 gpm 0 190 380 570 760 950 1140 lpm
Headloss (psi)
kPa psi 124 110 97 83 69 55 41 28
138 124 110 97 83 69 55 41 28
A-Vertical orientation B-Standard orientation
6" (150mm)
18 18 16 16 B 14 14 12 12 10 10 8 8 A 6 6 44 0 200 400 600 800 1000 1200 1400 gpm 0 200 400 600 800 1000 1200 1400 0 760 1520 2280 3040 3800 4540 5300 lpm
8" (200mm)
20 20 A 18 18 16 16 14 14 12 B 12 10 10 8 8 6 6 4 4 0 500 1000 1500 2000 2500 3000 gpm 0 1900 3800 5680 7560 9500 3000 11350 lpm 0 500 1000 1500 2000 2500
kPa psi
4" (100mm)
18 16 A 14 B 12 10 8 6 4 2 0 100 200 300 400 500 600 700 gpm 0 380 760 1140 1520 1900 2280 2660 lpm
A Watts Water Technologies Company
124 110 97 83 69 55 41 28
kPa psi
Headloss (psi)
Headloss (psi)
3" (80mm)
18 A 16 14 12 B 10 8 6 4 0 50 100 150 200 250 300 350 400 450 gpm 0 190 380 570 760 950 1140 1330 1520 1710 lpm
kPa psi 124 110 97 83 69 55 41 28 14
kPa psi
21⁄2" (65mm) Headloss (psi)
110 97 83 69 55 41 28 14
Headloss (psi)
Headloss (psi)
kPa psi
138 20
10" (250mm)
A
110 16
B
83 12 55 8 28 4 0 0
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 gpm 0 1900 3800 5680 7560 9500 11350 13250 15140 17030 18900 lpm
The 6" and 10" flow curves (B-standard orientation) include the FEBCO valve setter model 611.
USA: Fresno, CA • Tel: (559) 441-5300 • Fax: (559) 441-5301 • www.FEBCOonline.com Canada: Burlington, ON • Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.FEBCOonline.ca
ES-F-880V 1119
© 2011 FEBCO
