MDI STG Cable MounT
MDI STG Cable Mount 1, 2-Lamp Up/Down, T5, T5HO Staggered, Direct/Indirect Symmetric Project Information Project Name
Type
Catalog No.
Date
Construction
the visibility of fingerprints and construction dust without sacrifice to aesthetic qualities.
END CAPS
M4R - 95% Reflective Specular Aluminum louvers combine glare control and performance with a high tech aesthetic.
Extruded aluminum direct-indirect housing includes typical recycled content of 25-30%.
Features • • • • • • • • • • • •
3½" × 5" elegant geometric beam Uplight and Symmetric Downlight Symmetric downlight distribution standard Asymmetric downlight available; see MDIA STG CM specification sheet Up/Down switching available T5 or T5HO Extensive aesthetic and shielding options Staggered lamps on downlight for continuous light Full family including cable mount, wall mount, surface mount and recessed Companion fixtures include the 2½" × 3½" Microlyne® Mini and 3½" × 3½" Microlyne Aesthetic continuity across family, shielding and options Patented clips for louver retention (Patent #8,142,048)
Shape and Dimensions
Die cast flat end caps for standard lamp configuration. Both end caps feature silicone gasket to eliminate light leak, see Light Seal. Ships installed on fixture.
Light Seal
Housing unions between all joints include upper formed light seal and aligner connectors to block light. End of row and single units feature unique optimized V-0 closed cell silicone gasket light seal at joints between extruded housing and die cast end cap.
CONNECTIONS
Secure, simple housing connections ensure row continuity. Standard lamp configuration features patent pending Ready Connect system for end cap connections.
MOUNTING
Microlyne® Cable Mount uses adjustable aircraft cable. 5" steel canopy covers are provided standard for feed and non-feed locations.
A wide range of symmetric distributions include combinations of uplight and downlight using one or more lamps in either the indirect or direct portion and combined with many types of downlight shielding. See ordering guide for additional options. Number of lamps in cross section will determine which options are available. Note: Asymmetric downlight louver is also available and shown on MDIA STG CM specification sheet.
ELECTRICAL
FINISH
Matte White powder coat standard for end caps and housing. Zet Silver and additional colors and finishes optional. CONTROLS COMPATIBILITY Controls compatible. When used with occupancy sensors, most lamp vendors recommend program start ballasts (EP) to extend lamp life.
MA - Matte anodized louvers incorporate an attractive but subtle grain pattern which minimizes
Ordering Information
MDI —
Example: MDI-20-STG-1U1DT5-CM48-OA-EPU-MW
— STG — Row length 4' Single 8' Single 12' Single Indicate row length in 4' increments.1
Lamp stagger STG Staggered Lamps Down
Row pattern Blank Straight P Pattern (specify) Pattern layouts require factory approval drawings.
1U1DT5 1U1DT5HO 1U2DT5 1U2DT5HO 2U1DT5 2U1DT5HO 2U2DT5 2U2DT5HO
— CM Mounting CM Adj. Aircraft Cable Mount
—
—
Suspension length (CM) 18 18" 48 48" 96 96" Other Specify
LAMP TYPE AND PROFILE 1 Lamp Up, 1 Lamp Down, T5 1 Lamp Up, 1 Lamp Down, T5HO 1 Lamp Up, 2 Lamps Down, T5 1 Lamp Up, 2 Lamps Down, T5HO 2 Lamps Up, 1 Lamp Down, T5 2 Lamps Up, 1 Lamp Down, T5HO 2 Lamps Up, 2 Lamps Down, T5 2 Lamps Up, 2 Lamps Down, T5HO
— Ballast EP Electronic, Programmed Start (Std. for T5 & T5HO) ED Electronic, Dimming (Must specify)2
downlight shielding OA Opal Acrylic Lens WCB White Cross Baffle MA Matte Anodized Low Iridescent Semi-Specular Aluminum Louver (24 Cell) M4R 95% Reflective Specular Aluminum Louver (24 Cell) HEP High Efficiency Parabolic Specular Louver (15 Cell)
Rows over 12' will be configured by Alera. Example: 16' will be (2) 8'. For alternate configurations, contact factory. Specify dedicated voltage. 3 Not available with all configurations; some limitations apply. Contact factory for details. 4 One extra feed drop per EMC/NLC. For through wiring, contact factory. 5 For additional, specify quantity before nomenclature (Example: 2EL120, EMC277). 1
DISTRIBUTION
downlight SHIELDING
OA - Opal Acrylic lens emphasizes the narrow rectilinear shape by creating a pleasant glow of white along the underside of the housing.
3½"
Model MDI Microlyne® DirectIndirect
Uplight is open and free of shielding to allow maximum efficiency.
High reflectance formed white reflector.
REFLECTOR
WCB – White Cross Baffle emphasizes linearity with a crisp, clean bladed appearance.
4 8 12 __
UPLIGHT SHIELDING
—All luminaires are built to UL1598 standards and bear the appropriate cUL or CSA labels. Damp location listed. —Quick connect plugs standard.
Shielding is provided for single or continuous row. Options match across entire Microlyne® family. 5"
HEP - High efficiency specular parabolic louvers maximize downlight for enhanced efficiency where maximum light output is the primary concern.
Voltage U 120V277V 120 120V 277 277V 347 347V
DC LR UB EL EMC NLC GLR GMF TBAR
— Color MW Matte White (Std.) ZT ZET Metallic Silver See Color Selection Guide for other colors.
Options Dust Cover (N/A with T5HO) Left/Right Switching Upper/Lower Switching One Emergency Battery Pack Per Row2, 3, 5 One Emergency Circuit2, 3, 4, 5 Night Light Circuit2, 3, 4, 5 Fast Blow Fuse Slow Blow Fuse T-Bar Mounting
2
Page 1/2 Rev. 06/19/13
Beams / MDI STG CM
© 2013 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
MDI STG Cable Mount 1, 2-Lamp Up/Down, T5, T5HO Staggered, Direct/Indirect Symmetric Cross section Louver
Louver Opal Acrylic Lens
5"
M4R
White Cross Baffle
HEP
5"
3½"
3½"
1U1DT5
2U2DT5
Photometric Data
Ballast Ballast Factor Lamp Lumens per Lamp Watts Shielding Angle Spacing Criterion Luminous Opening in Feet
MDI-1T5-HEP-EP Microlyne® Beams 3.5" × 48" 2-Lamp with 1 × 15 CELL HEP LOUVER ICN-2S28 1.03 F28T5 2600 64 0º = 19 90º = 33 0º = 1.23 90º = 1.24 Length: 4.00 Width: 0.23 Height: 0.00
Avg. Luminance (Candela/Sq. M.) Coefficients of Utilization (%) 0 30 40 45 50 55 60 65 70 75 80 85
0.0 22.5 45.0 67.5 90.0
13279 12699 11867 10954 9611 7833 4891 3073 924 45 0 0
13279 12753 11669 10821 9538 7425 5054 2768 992 271 270 134
13279 12861 11837 10689 8937 6609 4048 1633 753 271 135 134
13279 12956 11409 9547 6917 3937 1404 498 205 90 67 0
13279 13010 10951 8852 5970 2631 445 221 171 136 67 0
RCR
Luminaire
Angle
Luminaire Data Test 14953
RC RW 1 2 3 4 5 6 7 8 9 10
70 87 80 74 68 63 58 54 50 47 44
80 50 30 84 81 75 70 66 61 59 53 53 47 48 42 44 37 40 33 36 30 33 27
10 78 66 56 48 42 37 32 29 26 23
70 80 74 68 63 58 54 50 46 43 40
70 50 30 78 75 69 65 62 57 55 50 50 44 45 39 41 35 37 31 34 29 31 26
10 73 62 53 46 40 35 31 27 25 22
50 66 59 53 48 43 39 36 32 30 28
50 30 64 56 49 43 39 34 31 28 25 23
10 62 53 46 40 35 31 28 25 22 20
Indoor Candela Plot 0 0 38 34 30 27 24 21 19 17 16 14
180
165
150
120 600 105
90
75 600
RCR = Room Cavity Ratio RC = Effective Ceiling Cavity Reflectance RW = Wall Reflectance
Zonal Lumen Summary Zone
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
Lumens % Lamp % Fixt. 875 1416 2147 2220 799 1250 1966 2370 4590
16.8 27.2 41.3 42.7 15.4 24.0 37.8 45.6 88.3
19.1 30.9 46.8 48.4 17.4 27.2 42.8 51.6 100.0
60
1200
Energy Data Total Luminaire Efficiency Luminaire Efficacy Rating (LER) ANSI/IESNA RP-1-2004 Compliance Comparative Yearly Lighting Energy Cost per 1000 Lumens
135
1200
0
88.3% 74 Yes-VDT Normal Use $3.24 based on 3000 hrs. and $0.08 per KWH
15
30 Horiz 0-180
0.0
45.0
45
90.0
Test Date 4/3/08
4' (Non-STG) 8' 12' 16' 20' 24' 28' 32' 48'
Page 2/2 Rev. 06/19/13
Row Length 4' 8' 12' 16' 20' 24' 28' 32' 48'
1T5
Microlyne® Staggered Lamp Configuration (1) 4' (3) 3' (1) 2' (3) 3' (1) 4' (4) 3' (2) 4' (1) 2' (5) 3' (2) 4' (6) 3' (3) 4' (1) 2' (7) 3' (3) 4' (8) 3' (4) 4' (12) 3' (6) 4'
Row Length 4' 8' 12' 16' 20' 24' 28' 32' 48'
2T5
Lamp Configuration (2) 4' (4) 4' (6) 4' (8) 4' (10) 4' (12) 4' (14) 4' (16) 4' (24) 4'
Beams / MDI STG CM
© 2013 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
Type
Catalog No.
Date
Construction
the visibility of fingerprints and construction dust without sacrifice to aesthetic qualities.
END CAPS
M4R - 95% Reflective Specular Aluminum louvers combine glare control and performance with a high tech aesthetic.
Extruded aluminum direct-indirect housing includes typical recycled content of 25-30%.
Features • • • • • • • • • • • •
3½" × 5" elegant geometric beam Uplight and Symmetric Downlight Symmetric downlight distribution standard Asymmetric downlight available; see MDIA STG CM specification sheet Up/Down switching available T5 or T5HO Extensive aesthetic and shielding options Staggered lamps on downlight for continuous light Full family including cable mount, wall mount, surface mount and recessed Companion fixtures include the 2½" × 3½" Microlyne® Mini and 3½" × 3½" Microlyne Aesthetic continuity across family, shielding and options Patented clips for louver retention (Patent #8,142,048)
Shape and Dimensions
Die cast flat end caps for standard lamp configuration. Both end caps feature silicone gasket to eliminate light leak, see Light Seal. Ships installed on fixture.
Light Seal
Housing unions between all joints include upper formed light seal and aligner connectors to block light. End of row and single units feature unique optimized V-0 closed cell silicone gasket light seal at joints between extruded housing and die cast end cap.
CONNECTIONS
Secure, simple housing connections ensure row continuity. Standard lamp configuration features patent pending Ready Connect system for end cap connections.
MOUNTING
Microlyne® Cable Mount uses adjustable aircraft cable. 5" steel canopy covers are provided standard for feed and non-feed locations.
A wide range of symmetric distributions include combinations of uplight and downlight using one or more lamps in either the indirect or direct portion and combined with many types of downlight shielding. See ordering guide for additional options. Number of lamps in cross section will determine which options are available. Note: Asymmetric downlight louver is also available and shown on MDIA STG CM specification sheet.
ELECTRICAL
FINISH
Matte White powder coat standard for end caps and housing. Zet Silver and additional colors and finishes optional. CONTROLS COMPATIBILITY Controls compatible. When used with occupancy sensors, most lamp vendors recommend program start ballasts (EP) to extend lamp life.
MA - Matte anodized louvers incorporate an attractive but subtle grain pattern which minimizes
Ordering Information
MDI —
Example: MDI-20-STG-1U1DT5-CM48-OA-EPU-MW
— STG — Row length 4' Single 8' Single 12' Single Indicate row length in 4' increments.1
Lamp stagger STG Staggered Lamps Down
Row pattern Blank Straight P Pattern (specify) Pattern layouts require factory approval drawings.
1U1DT5 1U1DT5HO 1U2DT5 1U2DT5HO 2U1DT5 2U1DT5HO 2U2DT5 2U2DT5HO
— CM Mounting CM Adj. Aircraft Cable Mount
—
—
Suspension length (CM) 18 18" 48 48" 96 96" Other Specify
LAMP TYPE AND PROFILE 1 Lamp Up, 1 Lamp Down, T5 1 Lamp Up, 1 Lamp Down, T5HO 1 Lamp Up, 2 Lamps Down, T5 1 Lamp Up, 2 Lamps Down, T5HO 2 Lamps Up, 1 Lamp Down, T5 2 Lamps Up, 1 Lamp Down, T5HO 2 Lamps Up, 2 Lamps Down, T5 2 Lamps Up, 2 Lamps Down, T5HO
— Ballast EP Electronic, Programmed Start (Std. for T5 & T5HO) ED Electronic, Dimming (Must specify)2
downlight shielding OA Opal Acrylic Lens WCB White Cross Baffle MA Matte Anodized Low Iridescent Semi-Specular Aluminum Louver (24 Cell) M4R 95% Reflective Specular Aluminum Louver (24 Cell) HEP High Efficiency Parabolic Specular Louver (15 Cell)
Rows over 12' will be configured by Alera. Example: 16' will be (2) 8'. For alternate configurations, contact factory. Specify dedicated voltage. 3 Not available with all configurations; some limitations apply. Contact factory for details. 4 One extra feed drop per EMC/NLC. For through wiring, contact factory. 5 For additional, specify quantity before nomenclature (Example: 2EL120, EMC277). 1
DISTRIBUTION
downlight SHIELDING
OA - Opal Acrylic lens emphasizes the narrow rectilinear shape by creating a pleasant glow of white along the underside of the housing.
3½"
Model MDI Microlyne® DirectIndirect
Uplight is open and free of shielding to allow maximum efficiency.
High reflectance formed white reflector.
REFLECTOR
WCB – White Cross Baffle emphasizes linearity with a crisp, clean bladed appearance.
4 8 12 __
UPLIGHT SHIELDING
—All luminaires are built to UL1598 standards and bear the appropriate cUL or CSA labels. Damp location listed. —Quick connect plugs standard.
Shielding is provided for single or continuous row. Options match across entire Microlyne® family. 5"
HEP - High efficiency specular parabolic louvers maximize downlight for enhanced efficiency where maximum light output is the primary concern.
Voltage U 120V277V 120 120V 277 277V 347 347V
DC LR UB EL EMC NLC GLR GMF TBAR
— Color MW Matte White (Std.) ZT ZET Metallic Silver See Color Selection Guide for other colors.
Options Dust Cover (N/A with T5HO) Left/Right Switching Upper/Lower Switching One Emergency Battery Pack Per Row2, 3, 5 One Emergency Circuit2, 3, 4, 5 Night Light Circuit2, 3, 4, 5 Fast Blow Fuse Slow Blow Fuse T-Bar Mounting
2
Page 1/2 Rev. 06/19/13
Beams / MDI STG CM
© 2013 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
MDI STG Cable Mount 1, 2-Lamp Up/Down, T5, T5HO Staggered, Direct/Indirect Symmetric Cross section Louver
Louver Opal Acrylic Lens
5"
M4R
White Cross Baffle
HEP
5"
3½"
3½"
1U1DT5
2U2DT5
Photometric Data
Ballast Ballast Factor Lamp Lumens per Lamp Watts Shielding Angle Spacing Criterion Luminous Opening in Feet
MDI-1T5-HEP-EP Microlyne® Beams 3.5" × 48" 2-Lamp with 1 × 15 CELL HEP LOUVER ICN-2S28 1.03 F28T5 2600 64 0º = 19 90º = 33 0º = 1.23 90º = 1.24 Length: 4.00 Width: 0.23 Height: 0.00
Avg. Luminance (Candela/Sq. M.) Coefficients of Utilization (%) 0 30 40 45 50 55 60 65 70 75 80 85
0.0 22.5 45.0 67.5 90.0
13279 12699 11867 10954 9611 7833 4891 3073 924 45 0 0
13279 12753 11669 10821 9538 7425 5054 2768 992 271 270 134
13279 12861 11837 10689 8937 6609 4048 1633 753 271 135 134
13279 12956 11409 9547 6917 3937 1404 498 205 90 67 0
13279 13010 10951 8852 5970 2631 445 221 171 136 67 0
RCR
Luminaire
Angle
Luminaire Data Test 14953
RC RW 1 2 3 4 5 6 7 8 9 10
70 87 80 74 68 63 58 54 50 47 44
80 50 30 84 81 75 70 66 61 59 53 53 47 48 42 44 37 40 33 36 30 33 27
10 78 66 56 48 42 37 32 29 26 23
70 80 74 68 63 58 54 50 46 43 40
70 50 30 78 75 69 65 62 57 55 50 50 44 45 39 41 35 37 31 34 29 31 26
10 73 62 53 46 40 35 31 27 25 22
50 66 59 53 48 43 39 36 32 30 28
50 30 64 56 49 43 39 34 31 28 25 23
10 62 53 46 40 35 31 28 25 22 20
Indoor Candela Plot 0 0 38 34 30 27 24 21 19 17 16 14
180
165
150
120 600 105
90
75 600
RCR = Room Cavity Ratio RC = Effective Ceiling Cavity Reflectance RW = Wall Reflectance
Zonal Lumen Summary Zone
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
Lumens % Lamp % Fixt. 875 1416 2147 2220 799 1250 1966 2370 4590
16.8 27.2 41.3 42.7 15.4 24.0 37.8 45.6 88.3
19.1 30.9 46.8 48.4 17.4 27.2 42.8 51.6 100.0
60
1200
Energy Data Total Luminaire Efficiency Luminaire Efficacy Rating (LER) ANSI/IESNA RP-1-2004 Compliance Comparative Yearly Lighting Energy Cost per 1000 Lumens
135
1200
0
88.3% 74 Yes-VDT Normal Use $3.24 based on 3000 hrs. and $0.08 per KWH
15
30 Horiz 0-180
0.0
45.0
45
90.0
Test Date 4/3/08
4' (Non-STG) 8' 12' 16' 20' 24' 28' 32' 48'
Page 2/2 Rev. 06/19/13
Row Length 4' 8' 12' 16' 20' 24' 28' 32' 48'
1T5
Microlyne® Staggered Lamp Configuration (1) 4' (3) 3' (1) 2' (3) 3' (1) 4' (4) 3' (2) 4' (1) 2' (5) 3' (2) 4' (6) 3' (3) 4' (1) 2' (7) 3' (3) 4' (8) 3' (4) 4' (12) 3' (6) 4'
Row Length 4' 8' 12' 16' 20' 24' 28' 32' 48'
2T5
Lamp Configuration (2) 4' (4) 4' (6) 4' (8) 4' (10) 4' (12) 4' (14) 4' (16) 4' (24) 4'
Beams / MDI STG CM
© 2013 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
