MDIA STG CAble MounT
MDIA STG Cable Mount 1 or 2 Lamps Up, 1 or 2 Lamps Down, Staggered Lamps, Direct Asymmetric Louver Project Information Project Name
Type
Catalog No.
Date
Construction
maximize downlight for enhanced efficiency where maximum light output is the primary concern.
END CAPS
MA - Matte anodized louvers incorporate an attractive but subtle grain pattern which minimizes the visibility of fingerprints and construction dust without sacrifice to aesthetic qualities.
Extruded aluminum direct-indirect housing includes typical recycled content of 25-30%. Die cast flat end caps for standard lamp configuration. Both end caps feature silicone gasket to eliminate light leak, see Light Seal. Ships installed on fixture.
Features • 3½" × 5" elegant geometric beam • Uplight and Asymmetric Downlight • Asymmetric downlight louver does not intrude below fixture housing • Symmetric downlight available; see MDI STG CM specification sheet • Up/Down switching available • T5 or T5HO • Extensive aesthetic and shielding options • Staggered lamps for continuous light • Full family including cable mount, wall mount, surface mount and recessed • Companion fixtures include the 2½" × 3½" Microlyne® Mini and 3½" × 3½" Microlyne • Aesthetic continuity across family, shielding and options • Patented clips for louver retention (Patent #8,142,048)
Shape and Dimensions
UPLIGHT SHIELDING
Uplight is open and free of shielding to allow maximum efficiency.
Light seal
Housing unions between all joints include upper formed light seal and aligner connectors to block light. End of row and single units feature unique optimized V-0 closed cell silicone gasket light seal at joints between extruded housing and die cast end cap.
DISTRIBUTION
A wide range of symmetric up/asymmetric downlight distributions include combinations of uplight and downlight using one or more lamps in either the indirect or direct portion and combined with many types of downlight shielding. See ordering guide for additional options. Number of lamps in cross section will determine which options are available. Note that a wide range of symmetric downlight options can be found on MDI STG CM specification sheet.
CONNECTIONS
Secure, simple housing connections ensure row continuity. Standard lamp configuration features patent pending Ready Connect system for end cap connections.
ELECTRICAL
—All luminaires are built to UL1598 standards and bear the appropriate cUL or CSA labels. Damp location listed. —Quick connect plugs standard.
MOUNTING
Microlyne® Cable Mount uses adjustable aircraft cable. 5" steel canopy covers are provided standard for feed and non-feed locations. 2" canopies optional.
FINISH
REFLECTOR
Matte White powder coat standard for end caps and housing. Zet Silver and additional colors and finishes optional.
High reflectance formed white reflector.
downlight SHIELDING
5"
HEP - High efficiency specular parabolic louvers
Ordering Information
A— 4 8 12 __
— STG — Row length 4' Single 8' Single 12' Single Indicate row length in 4' increments.1
Sym / asym A Asymmetric Louver Model MDI Microlyne® Direct-Indirect
Controls compatible. When used with occupancy sensors, most lamp vendors recommend program start ballasts (EP) to extend lamp life.
M4R - Asymmetric 95% Reflective Specular Aluminum louver combines glare control and performance with a high tech aesthetic.
3½"
MDI
CONTROLS COMPATIBILITY
Shielding is provided for single or continuous row. Asymmetric louvers appear identical to standard louvers from below the fixture. The asymmetric louver lights vertical surfaces by providing light to areas above typical cut-off.
Lamp stagger STG Staggered
Row pattern Blank Straight P Pattern (specify) Pattern layouts require factory approval drawings.
Example: MDIA-20-STG-1U1DT5-CM48-HEP-EPU-MW
— CM Mounting CM Adj. Aircraft Cable Mount
— Suspension length (CM) 18 18" 48 48" 96 96" Other Specify
LAMP TYPE AND PROFILE 1U1DT5 1 Lamp Up, 1 Lamp Down, T5 1U1DT5HO 1 Lamp Up, 1 Lamp Down, T5HO 1U2DT5 1 Lamp Up, 2 Lamps Down, T5 1U2DT5HO 1 Lamp Up, 2 Lamps Down, T5HO 2U1DT5 2 Lamps Up, 1 Lamp Down, T5 2U1DT5HO 2 Lamps Up, 1 Lamp Down, T5HO 2U2DT5 2 Lamps Up, 2 Lamps Down, T5 2U2DT5HO 2 Lamps Up, 2 Lamps Down, T5HO
— downlight shielding M4R 95% Reflective Specular Aluminum Louver (24 Cell) HEP High Efficiency Parabolic Specular Louver (15 Cell) MA Matte Anodized Low Iridescent Semi-Specular Aluminum (24 Cell)
Ballast EP Electronic, Programmed Start (Std. for T5 & T5HO) ED Electronic, Dimming (Must Specify)2
— Voltage U 120V277V 120 120V 277 277V 347 347V
DC LR UB EL EMC NLC GLR GMF TBAR
— Color MW Matte White (Std.) ZT ZET Metallic Silver See Color Selection Guide for other colors.
Options Dust Cover (N/A with T5HO) Left/Right Switching (2-Lamp only) Upper/Lower Switching One Emergency Battery Pack Per Row2, 4, 5 One Emergency Circuit2, 3, 4, 5 Night Light Circuit2, 3, 4, 5 Fast Blow Fuse Slow Blow Fuse T-Bar Mounting
Rows over 12' will be configured by Alera. Example: 16' will be (2) 8'. For alternate configurations, contact factory. Specify dedicated voltage. 3 Not available with all configurations; some limitations apply. Contact factory for details. 4 One extra feed drop per EMC/NLC. For through wiring, contact factory. 5 For additional, specify quantity before nomenclature (Example: 2EL120, EMC277). 1
2
Page 1/2 Rev. 06/19/13
Beams / MDIA STG CM
© 2013 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
MDIA STG Cable Mount 1 or 2 Lamps Up, 1 or 2 Lamps Down, Staggered Lamps, Direct Asymmetric Louver Cross section
Asymmetric Louver
Asymmetric Louver
5"
Lamp
HEP
5"
3½" 1U1DT5
Staggered End Detail
M4R
3½" 2U2DT5
8 ft. Single Staggered Lamp Detail 1T5
3 ft. lamp
Ends are solid.
4 ft. lamp
3 ft. lamp
96" 96⅜" 2T5
4 ft. lamps
Reflector
96" 96⅜"
Staggered in downlight component only.
Photometric Data Luminaire Data Test 14954 Luminaire
Ballast Ballast Factor Lamp Lumens per Lamp Watts Shielding Angle
Zonal Lumen Summary Zone
MDIA-1T5-HEP-EP Microlyne® Beams 3.5" × 48" 2-Lamp with 1 × 15 Cell HEP Wall Wash Louver ICN-2S28 1.03 F28T5 2600 64 0º = 19 90º = 33
Energy Data
Lumens % Lamp % Fixt.
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
843 1354 2096 2216 790 1238 1954 2358 4575
16.2 26.0 40.3 42.6 15.2 23.8 37.6 45.4 88.0
Indoor Candela Plot 135
150
165
180
165
150
Candela Summary 135
1200
120
120 600 105
90
Angle
105
90
75
75 600
60
60
1200 45
30
15
0
270.0-90.0
15
30
88.0% 74 $3.24 based on 3000 hrs. and $0.08 per KWH
Total Luminaire Efficiency Luminaire Efficacy Rating (LER) Comparative Yearly Lighting Energy Cost per 1000 Lumens
18.4 29.6 45.8 48.4 17.3 27.1 42.7 51.6 100.0
0.0 15.0 30.0 45.0 60.0 75.0 90.0 105.0 120.0 135.0 150.0 165.0 180.0
90.0
1113 1040 934 461 20 3 0 396 551 709 551 496 482
135.0 180.0 225.0 270.0 1113 1075 908 622 148 6 0 333 574 529 481 488 482
1113 1067 923 657 207 0 0 85 209 320 408 463 482
1113 1056 863 604 265 16 0 322 550 534 476 487 482
1113 1021 826 565 302 12 0 371 503 736 564 496 482
45
Test Date 4/4/08
180.0-0.0
Microlyne® Staggered 1T5
4' (Non-STG) 8' 12' 16' 20' 24' 28' 32' 48' Page 2/2 Rev. 06/19/13
2T5
Row Length
Lamp Configuration
Row Length
Lamp Configuration
4' ⅜" 8' 4⅜" 12' 4⅜" 16' 4⅜" 20' 4⅜" 24' 4⅜" 28' 4⅜" 32' 4⅜" 48' 4⅜"
(1) 4' (2) 3' (1) 4' (2) 3' (2) 4' (4) 3' (2) 4' (4) 3' (3) 4' (6) 3' (3) 4' (6) 3' (4) 4' (8) 3' (3) 4' (12) 3' (6) 4'
4' ⅜" 8' 4⅜" 12' 4⅜" 16' 4⅜" 20' 4⅜" 24' 4⅜" 28' 4⅜" 32' 4⅜" 48' 4⅜"
(2) 4' (4) 4' (6) 4' (8) 4' (10) 4' (12) 4' (14) 4' (16) 4' (24) 4' Beams / MDIA STG CM
© 2013 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
Type
Catalog No.
Date
Construction
maximize downlight for enhanced efficiency where maximum light output is the primary concern.
END CAPS
MA - Matte anodized louvers incorporate an attractive but subtle grain pattern which minimizes the visibility of fingerprints and construction dust without sacrifice to aesthetic qualities.
Extruded aluminum direct-indirect housing includes typical recycled content of 25-30%. Die cast flat end caps for standard lamp configuration. Both end caps feature silicone gasket to eliminate light leak, see Light Seal. Ships installed on fixture.
Features • 3½" × 5" elegant geometric beam • Uplight and Asymmetric Downlight • Asymmetric downlight louver does not intrude below fixture housing • Symmetric downlight available; see MDI STG CM specification sheet • Up/Down switching available • T5 or T5HO • Extensive aesthetic and shielding options • Staggered lamps for continuous light • Full family including cable mount, wall mount, surface mount and recessed • Companion fixtures include the 2½" × 3½" Microlyne® Mini and 3½" × 3½" Microlyne • Aesthetic continuity across family, shielding and options • Patented clips for louver retention (Patent #8,142,048)
Shape and Dimensions
UPLIGHT SHIELDING
Uplight is open and free of shielding to allow maximum efficiency.
Light seal
Housing unions between all joints include upper formed light seal and aligner connectors to block light. End of row and single units feature unique optimized V-0 closed cell silicone gasket light seal at joints between extruded housing and die cast end cap.
DISTRIBUTION
A wide range of symmetric up/asymmetric downlight distributions include combinations of uplight and downlight using one or more lamps in either the indirect or direct portion and combined with many types of downlight shielding. See ordering guide for additional options. Number of lamps in cross section will determine which options are available. Note that a wide range of symmetric downlight options can be found on MDI STG CM specification sheet.
CONNECTIONS
Secure, simple housing connections ensure row continuity. Standard lamp configuration features patent pending Ready Connect system for end cap connections.
ELECTRICAL
—All luminaires are built to UL1598 standards and bear the appropriate cUL or CSA labels. Damp location listed. —Quick connect plugs standard.
MOUNTING
Microlyne® Cable Mount uses adjustable aircraft cable. 5" steel canopy covers are provided standard for feed and non-feed locations. 2" canopies optional.
FINISH
REFLECTOR
Matte White powder coat standard for end caps and housing. Zet Silver and additional colors and finishes optional.
High reflectance formed white reflector.
downlight SHIELDING
5"
HEP - High efficiency specular parabolic louvers
Ordering Information
A— 4 8 12 __
— STG — Row length 4' Single 8' Single 12' Single Indicate row length in 4' increments.1
Sym / asym A Asymmetric Louver Model MDI Microlyne® Direct-Indirect
Controls compatible. When used with occupancy sensors, most lamp vendors recommend program start ballasts (EP) to extend lamp life.
M4R - Asymmetric 95% Reflective Specular Aluminum louver combines glare control and performance with a high tech aesthetic.
3½"
MDI
CONTROLS COMPATIBILITY
Shielding is provided for single or continuous row. Asymmetric louvers appear identical to standard louvers from below the fixture. The asymmetric louver lights vertical surfaces by providing light to areas above typical cut-off.
Lamp stagger STG Staggered
Row pattern Blank Straight P Pattern (specify) Pattern layouts require factory approval drawings.
Example: MDIA-20-STG-1U1DT5-CM48-HEP-EPU-MW
— CM Mounting CM Adj. Aircraft Cable Mount
— Suspension length (CM) 18 18" 48 48" 96 96" Other Specify
LAMP TYPE AND PROFILE 1U1DT5 1 Lamp Up, 1 Lamp Down, T5 1U1DT5HO 1 Lamp Up, 1 Lamp Down, T5HO 1U2DT5 1 Lamp Up, 2 Lamps Down, T5 1U2DT5HO 1 Lamp Up, 2 Lamps Down, T5HO 2U1DT5 2 Lamps Up, 1 Lamp Down, T5 2U1DT5HO 2 Lamps Up, 1 Lamp Down, T5HO 2U2DT5 2 Lamps Up, 2 Lamps Down, T5 2U2DT5HO 2 Lamps Up, 2 Lamps Down, T5HO
— downlight shielding M4R 95% Reflective Specular Aluminum Louver (24 Cell) HEP High Efficiency Parabolic Specular Louver (15 Cell) MA Matte Anodized Low Iridescent Semi-Specular Aluminum (24 Cell)
Ballast EP Electronic, Programmed Start (Std. for T5 & T5HO) ED Electronic, Dimming (Must Specify)2
— Voltage U 120V277V 120 120V 277 277V 347 347V
DC LR UB EL EMC NLC GLR GMF TBAR
— Color MW Matte White (Std.) ZT ZET Metallic Silver See Color Selection Guide for other colors.
Options Dust Cover (N/A with T5HO) Left/Right Switching (2-Lamp only) Upper/Lower Switching One Emergency Battery Pack Per Row2, 4, 5 One Emergency Circuit2, 3, 4, 5 Night Light Circuit2, 3, 4, 5 Fast Blow Fuse Slow Blow Fuse T-Bar Mounting
Rows over 12' will be configured by Alera. Example: 16' will be (2) 8'. For alternate configurations, contact factory. Specify dedicated voltage. 3 Not available with all configurations; some limitations apply. Contact factory for details. 4 One extra feed drop per EMC/NLC. For through wiring, contact factory. 5 For additional, specify quantity before nomenclature (Example: 2EL120, EMC277). 1
2
Page 1/2 Rev. 06/19/13
Beams / MDIA STG CM
© 2013 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
MDIA STG Cable Mount 1 or 2 Lamps Up, 1 or 2 Lamps Down, Staggered Lamps, Direct Asymmetric Louver Cross section
Asymmetric Louver
Asymmetric Louver
5"
Lamp
HEP
5"
3½" 1U1DT5
Staggered End Detail
M4R
3½" 2U2DT5
8 ft. Single Staggered Lamp Detail 1T5
3 ft. lamp
Ends are solid.
4 ft. lamp
3 ft. lamp
96" 96⅜" 2T5
4 ft. lamps
Reflector
96" 96⅜"
Staggered in downlight component only.
Photometric Data Luminaire Data Test 14954 Luminaire
Ballast Ballast Factor Lamp Lumens per Lamp Watts Shielding Angle
Zonal Lumen Summary Zone
MDIA-1T5-HEP-EP Microlyne® Beams 3.5" × 48" 2-Lamp with 1 × 15 Cell HEP Wall Wash Louver ICN-2S28 1.03 F28T5 2600 64 0º = 19 90º = 33
Energy Data
Lumens % Lamp % Fixt.
0-30 0-40 0-60 0-90 90-120 90-130 90-150 90-180 0-180
843 1354 2096 2216 790 1238 1954 2358 4575
16.2 26.0 40.3 42.6 15.2 23.8 37.6 45.4 88.0
Indoor Candela Plot 135
150
165
180
165
150
Candela Summary 135
1200
120
120 600 105
90
Angle
105
90
75
75 600
60
60
1200 45
30
15
0
270.0-90.0
15
30
88.0% 74 $3.24 based on 3000 hrs. and $0.08 per KWH
Total Luminaire Efficiency Luminaire Efficacy Rating (LER) Comparative Yearly Lighting Energy Cost per 1000 Lumens
18.4 29.6 45.8 48.4 17.3 27.1 42.7 51.6 100.0
0.0 15.0 30.0 45.0 60.0 75.0 90.0 105.0 120.0 135.0 150.0 165.0 180.0
90.0
1113 1040 934 461 20 3 0 396 551 709 551 496 482
135.0 180.0 225.0 270.0 1113 1075 908 622 148 6 0 333 574 529 481 488 482
1113 1067 923 657 207 0 0 85 209 320 408 463 482
1113 1056 863 604 265 16 0 322 550 534 476 487 482
1113 1021 826 565 302 12 0 371 503 736 564 496 482
45
Test Date 4/4/08
180.0-0.0
Microlyne® Staggered 1T5
4' (Non-STG) 8' 12' 16' 20' 24' 28' 32' 48' Page 2/2 Rev. 06/19/13
2T5
Row Length
Lamp Configuration
Row Length
Lamp Configuration
4' ⅜" 8' 4⅜" 12' 4⅜" 16' 4⅜" 20' 4⅜" 24' 4⅜" 28' 4⅜" 32' 4⅜" 48' 4⅜"
(1) 4' (2) 3' (1) 4' (2) 3' (2) 4' (4) 3' (2) 4' (4) 3' (3) 4' (6) 3' (3) 4' (6) 3' (4) 4' (8) 3' (3) 4' (12) 3' (6) 4'
4' ⅜" 8' 4⅜" 12' 4⅜" 16' 4⅜" 20' 4⅜" 24' 4⅜" 28' 4⅜" 32' 4⅜" 48' 4⅜"
(2) 4' (4) 4' (6) 4' (8) 4' (10) 4' (12) 4' (14) 4' (16) 4' (24) 4' Beams / MDIA STG CM
© 2013 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
