Microsoft Surface Pro 2 SSD Replacement

Microsoft Surface Pro 2 SSD Replacement

Microsoft Surface Pro 2 SSD Replacement Written By: Ronnie

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Microsoft Surface Pro 2 SSD Replacement

TOOLS:

PARTS:

T5 Torx Screwdriver (1)

mSATA SSD (1)

T4 Torx Screwdriver (1) T3 Torx Screwdriver (1) iOpener (1) iFixit Opening Picks set of 6 (4) Spudger (1) Phillips #00 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Microsoft Surface Pro 2 SSD Replacement

Step 1 — SSD



Remove the two T5 Torx screws, then take off the kickstand.

Step 2



Use an iOpener or heat gun to melt the adhesive.



Insert 21 opening picks under the display.



Slowly lift off the display.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Microsoft Surface Pro 2 SSD Replacement

Step 3



Remove the four ribbon cables connecting to the motherboard with a spudger.



Remove the 52 screws securing the motherboard to the metal plates and the plastic bezel.



Lift off the motherboard.

Step 4 

Unscrew the two screws on the mSATA SSD and remove the SSD. (Note: This image is from a first generation Surface Pro, but it works)

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 10:04:03 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4