Model: HYW-13 T5 - Power Systems Australia
Model: HYW-13 T5 INDUSTRIAL RANGE Powered by YANMAR Market: Australia
A10
K1
WATER-COOLED THREE PHASE 50 HZ STAGE 3A DIESEL
CE
COMPLIANCE
Generator Ratings SERVICE Power Power Rated Speed Standard Voltage Available Voltages Rated at power factor
kVA kW r.p.m.
PRP (Prime) 12,5 10
STANDBY 13,4 10,7 1.500
V
400
V Cos Phi
230 /400V 0,8
Definitions Standby rating These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3).
General Data Documents
A full set of operation and maintenance manuals and circuit wiring diagrams.
Prime Rating These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours.
Quality Standards
Standard Reference Conditions Note: Standard reference conditions 25°C (77°F) air inlet temp, 100m (328ft) A.S.L. 30% relative humidity. Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869:1998, Class A2.
Warranty
BS4999, BS5000, BSEN60034, BSEN61000, IEC60034
All equipment carries full manufacturer’s warranty. 2000 hours/12 months
HIMOINSA HEADQUARTERS:
Ctra. Murcia - San Javier, Km. 23,6 | 30730 SAN JAVIER (Murcia) Spain Tel.+34 968 19 11 28 Fax +34 968 19 12 17 Fax +34 968 19 04 20 [email protected] www.himoinsa.com
Manufacture facilities: QR Code SPAIN • FRANCE • INDIA • CHINA • USA Subsidiaries: ITALY | PORTUGAL | POLAND | GERMANY I SINGAPORE | UAE | MEXICO | PANAMÁ | ARGENTINA | ANGOLA
Model: HYW-13 T5 INDUSTRIAL RANGE Powered by YANMAR Market: Australia
Engine Specification
Alternator Specification
PRP
Engine Rated Output
(Kw)
Standby
12,2
Engine Manufacturer
Alternator Alternator Manufacturer
13,2 YANMAR 3TNV88
Engine Model Engine Type Injection Type
Diesel 4 strokes-cycle Direct
Aspiration Type Cylinders Arrangement (mm) Bore and Stroke Displacement
Natural 3-L 88 x 90
PI044F 4
Winding Conections (standard) Frame Mounting Terminals
Star-serie S-4 7,5" 12
Compression Ratio
19,1
Insulation Type AVR Model Winding Pitch Voltage Regulation NL-FL IP Rating Telephone Interference
Fuel Consumption StandBy (L/hr) Fuel Consumption 100% PRP (L/hr)
3,9 3,59 2,74 2
Excitation System Bearing Coupling Coating (Standard)
1,642
Lube Oil Specifications
SAE 3 class 10W30 / IPE grade CD,CF
Fuel Consumption 75 % PRP (L/hr) Fuel Consumption 50 % PRP (L/hr) Lube Oil Consumption Full Load (g/kwh) Total Oil Capacity
(L)
Total Coolant Capacity Governor Type
H class AS480 2/3 _ +1% A.V.R. (Electronic) IP23 THF
A10
K1
WATER-COOLED THREE PHASE 50 HZ STAGE 3A DIESEL
CE
COMPLIANCE
Generator Ratings SERVICE Power Power Rated Speed Standard Voltage Available Voltages Rated at power factor
kVA kW r.p.m.
PRP (Prime) 12,5 10
STANDBY 13,4 10,7 1.500
V
400
V Cos Phi
230 /400V 0,8
Definitions Standby rating These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3).
General Data Documents
A full set of operation and maintenance manuals and circuit wiring diagrams.
Prime Rating These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours.
Quality Standards
Standard Reference Conditions Note: Standard reference conditions 25°C (77°F) air inlet temp, 100m (328ft) A.S.L. 30% relative humidity. Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869:1998, Class A2.
Warranty
BS4999, BS5000, BSEN60034, BSEN61000, IEC60034
All equipment carries full manufacturer’s warranty. 2000 hours/12 months
HIMOINSA HEADQUARTERS:
Ctra. Murcia - San Javier, Km. 23,6 | 30730 SAN JAVIER (Murcia) Spain Tel.+34 968 19 11 28 Fax +34 968 19 12 17 Fax +34 968 19 04 20 [email protected] www.himoinsa.com
Manufacture facilities: QR Code SPAIN • FRANCE • INDIA • CHINA • USA Subsidiaries: ITALY | PORTUGAL | POLAND | GERMANY I SINGAPORE | UAE | MEXICO | PANAMÁ | ARGENTINA | ANGOLA
Model: HYW-13 T5 INDUSTRIAL RANGE Powered by YANMAR Market: Australia
Engine Specification
Alternator Specification
PRP
Engine Rated Output
(Kw)
Standby
12,2
Engine Manufacturer
Alternator Alternator Manufacturer
13,2 YANMAR 3TNV88
Engine Model Engine Type Injection Type
Diesel 4 strokes-cycle Direct
Aspiration Type Cylinders Arrangement (mm) Bore and Stroke Displacement
Natural 3-L 88 x 90
PI044F 4
Winding Conections (standard) Frame Mounting Terminals
Star-serie S-4 7,5" 12
Compression Ratio
19,1
Insulation Type AVR Model Winding Pitch Voltage Regulation NL-FL IP Rating Telephone Interference
Fuel Consumption StandBy (L/hr) Fuel Consumption 100% PRP (L/hr)
3,9 3,59 2,74 2
Excitation System Bearing Coupling Coating (Standard)
1,642
Lube Oil Specifications
SAE 3 class 10W30 / IPE grade CD,CF
Fuel Consumption 75 % PRP (L/hr) Fuel Consumption 50 % PRP (L/hr) Lube Oil Consumption Full Load (g/kwh) Total Oil Capacity
(L)
Total Coolant Capacity Governor Type
H class AS480 2/3 _ +1% A.V.R. (Electronic) IP23 THF
