Moto X Pure Edition Auxiliary Port Replacement
Moto X Pure Edition Auxiliary Port Replacement
Moto X Pure Edition Auxiliary Port Replacement This guide will show how to remove and replace the Auxiliary port of the phone.
Written By: Lucas Dos Santos
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Moto X Pure Edition Auxiliary Port Replacement
TOOLS: Spudger (1) SIM Card Eject Tool (1) T4 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Moto X Pure Edition Auxiliary Port Replacement
Step 1 — Sim Card & Tray
Using the sim card removal tool remove the sim card tray.
Step 2 — Back Plate
There is adhesive holding the back plate in place. Be careful removing this as there is wiring on the other side.
© iFixit — CC BY-NC-SA
www.iFixit.com
Using the sim card removal tool, pry off the back plate.
Page 3 of 5
Moto X Pure Edition Auxiliary Port Replacement
Step 3 — Back Panel
Disconnect the two battery connections.
Remove the two parallel black tabs by pulling on them.
Step 4
All screw lengths are 2.5mm Take notice of the orange circle. Do not remove the T4 screw it contains. This is not necessary and may cause the loss of parts.
Using the T4 screw driver, remove all 20 T4 screws.
Using the nylon spudger, remove the two clips holding the panel in place.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
Moto X Pure Edition Auxiliary Port Replacement
Step 5 — Auxiliary Port
Using the nylon spudger, remove the auxiliary port.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-27 05:46:21 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
Moto X Pure Edition Auxiliary Port Replacement This guide will show how to remove and replace the Auxiliary port of the phone.
Written By: Lucas Dos Santos
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Moto X Pure Edition Auxiliary Port Replacement
TOOLS: Spudger (1) SIM Card Eject Tool (1) T4 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Moto X Pure Edition Auxiliary Port Replacement
Step 1 — Sim Card & Tray
Using the sim card removal tool remove the sim card tray.
Step 2 — Back Plate
There is adhesive holding the back plate in place. Be careful removing this as there is wiring on the other side.
© iFixit — CC BY-NC-SA
www.iFixit.com
Using the sim card removal tool, pry off the back plate.
Page 3 of 5
Moto X Pure Edition Auxiliary Port Replacement
Step 3 — Back Panel
Disconnect the two battery connections.
Remove the two parallel black tabs by pulling on them.
Step 4
All screw lengths are 2.5mm Take notice of the orange circle. Do not remove the T4 screw it contains. This is not necessary and may cause the loss of parts.
Using the T4 screw driver, remove all 20 T4 screws.
Using the nylon spudger, remove the two clips holding the panel in place.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
Moto X Pure Edition Auxiliary Port Replacement
Step 5 — Auxiliary Port
Using the nylon spudger, remove the auxiliary port.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-27 05:46:21 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
