Motorola Moto G3 LCD Screen Replacement

Motorola Moto G3 LCD Screen Replacement

Motorola Moto G3 LCD Screen Replacement Here are steps about how to replace your Motorola Moto G3 cracked LCD screen.

Written By: Eric

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Motorola Moto G3 LCD Screen Replacement

INTRODUCTION Get original Motorola Moto G3 LCD screen with digitizer at Witrigs. [video: https://www.youtube.com/watch?v=hj1g8Li-Qt8]

TOOLS:

PARTS:

Heat Gun (1)

Original LCD Screen for Moto G3 (1)

Guitar Picks (1) iFixit Opening Tools (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Motorola Moto G3 LCD Screen Replacement

Step 1 — LCD Screen



Heat up the LCD screen for a while.



Then with the help of suction cup, insert guitar picks to open a gap. Slide guitar picks or plastic opening tool to cut strong adhesives.

 There is LCD screen connector on the left side, so be careful to slide guitar picks. Step 2



Release LCD screen connector firstly.



Remove LCD screen.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Motorola Moto G3 LCD Screen Replacement

Step 3 

Done.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 01:15:46 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4