Motorola Moto G3 Teardown
Motorola Moto G3 Teardown
Motorola Moto G3 Teardown Here comes with detailed steps to do Motorola Moto G3 whole teardown/disassembly.
Written By: Eric
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 10
Motorola Moto G3 Teardown
INTRODUCTION [video: https://www.youtube.com/watch?v=4039WGldia0]
TOOLS: Heat Gun (1) Suction Handle (1) Guitar Picks (1) T4 Torx Screwdriver (1) Tweezers (1) Spudger (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 10
Motorola Moto G3 Teardown
Step 1 — Motorola Moto G3 Teardown
Remove back cover.
Moto G3 plastic panel can be easily removed with the fingernails. Step 2
Remove camera&flashlight metal cover. Use tweezers to cut strong adhesives underneath.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 10
Motorola Moto G3 Teardown
Step 3
Undo 3 screws by T4 Torx screwdriver.
Take away plastic securing part.
Step 4
Heat up the LCD screen for a while.
Then with the help of suction cup, insert guitar picks to open a gap. Slide guitar picks or plastic opening tool to cut strong adhesives.
There is LCD screen connector on the left side, so be careful to slide guitar picks.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 10
Motorola Moto G3 Teardown
Step 5
Release LCD screen connector firstly.
Remove LCD screen.
Step 6
Undo 14 screws by T4 Torx screwdriver
Pry up motherboard assembly.
Battery flex connector is connected with motherboard, so be careful to pry the assembly up.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 10
Motorola Moto G3 Teardown
Step 7
Release battery flex connector.
Separate motherboard assembly from back cover assembly.
Step 8
Undo 3 screws here.
Use spudger to cut adhesives and pry the SIM&SD card reader board, then remove it.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 10
Motorola Moto G3 Teardown
Step 9
Remove front-facing camera.
Step 10
Remove rear camera.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 10
Motorola Moto G3 Teardown
Step 11
Remove earpiece.
Step 12
Remove loudspeaker.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 8 of 10
Motorola Moto G3 Teardown
Step 13
Here is the motherboard.
Step 14
Use spudger to cut adhesive and pry the battery up.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 9 of 10
Motorola Moto G3 Teardown
Step 15
Take away headphone jack.
Step 16
Done
This document was last generated on 2017-06-25 04:35:19 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 10 of 10
Motorola Moto G3 Teardown Here comes with detailed steps to do Motorola Moto G3 whole teardown/disassembly.
Written By: Eric
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 10
Motorola Moto G3 Teardown
INTRODUCTION [video: https://www.youtube.com/watch?v=4039WGldia0]
TOOLS: Heat Gun (1) Suction Handle (1) Guitar Picks (1) T4 Torx Screwdriver (1) Tweezers (1) Spudger (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 10
Motorola Moto G3 Teardown
Step 1 — Motorola Moto G3 Teardown
Remove back cover.
Moto G3 plastic panel can be easily removed with the fingernails. Step 2
Remove camera&flashlight metal cover. Use tweezers to cut strong adhesives underneath.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 10
Motorola Moto G3 Teardown
Step 3
Undo 3 screws by T4 Torx screwdriver.
Take away plastic securing part.
Step 4
Heat up the LCD screen for a while.
Then with the help of suction cup, insert guitar picks to open a gap. Slide guitar picks or plastic opening tool to cut strong adhesives.
There is LCD screen connector on the left side, so be careful to slide guitar picks.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 10
Motorola Moto G3 Teardown
Step 5
Release LCD screen connector firstly.
Remove LCD screen.
Step 6
Undo 14 screws by T4 Torx screwdriver
Pry up motherboard assembly.
Battery flex connector is connected with motherboard, so be careful to pry the assembly up.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 10
Motorola Moto G3 Teardown
Step 7
Release battery flex connector.
Separate motherboard assembly from back cover assembly.
Step 8
Undo 3 screws here.
Use spudger to cut adhesives and pry the SIM&SD card reader board, then remove it.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 10
Motorola Moto G3 Teardown
Step 9
Remove front-facing camera.
Step 10
Remove rear camera.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 10
Motorola Moto G3 Teardown
Step 11
Remove earpiece.
Step 12
Remove loudspeaker.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 8 of 10
Motorola Moto G3 Teardown
Step 13
Here is the motherboard.
Step 14
Use spudger to cut adhesive and pry the battery up.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 9 of 10
Motorola Moto G3 Teardown
Step 15
Take away headphone jack.
Step 16
Done
This document was last generated on 2017-06-25 04:35:19 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 10 of 10
