Motorola Moto X 2nd Generation Logo Replacement

Motorola Moto X 2nd Generation Logo Replacement

Motorola Moto X 2nd Generation Logo Replacement Written By: Sophia

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Motorola Moto X 2nd Generation Logo Replacement

TOOLS: T3 Torx Screwdriver (1) iFixit Opening Picks set of 6 (1) Tweezers (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Motorola Moto X 2nd Generation Logo Replacement

Step 1 — Logo



Remove SIM card tray.

Step 2



Use the eject pin to open a gap and place a guitar pick into the gap.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Motorola Moto X 2nd Generation Logo Replacement

Step 3



Slide the guitar pick to cut the adhesive sticker and peel off the soft back cover.

Step 4



Twist off three screws, pry up the securing bracket and remove the logo finally.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 02:35:23 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4