Motorola Q Global Camera Replacement

Report 6 Downloads 299 Views
Motorola Q Global Camera Replacement

Motorola Q Global Camera Replacement Replace a broken camera on your Motorola Q Global.

Written By: Jorge Vanegas Moran

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 7

Motorola Q Global Camera Replacement

INTRODUCTION This guide will focus on disassembling the necessary components for the phone in order to get to the camera hardware and remove it from the motherboard.

TOOLS: iFixit Opening Tools (1) T5 Torx Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 7

Motorola Q Global Camera Replacement

Step 1 — Battery 

Turn the phone face down.



Press and hold the release button in the middle of the back panel.



Slide the bottom panel down to remove.

Step 2



Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.

 When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 7

Motorola Q Global Camera Replacement

Step 3 — Camera 

Press inward on the upper casing.



Slide the upper case to the right and lift up.



Lift the camera sticker so that it doesn't get damaged.

Step 4

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 7

Motorola Q Global Camera Replacement

Step 5



Remove the six labeled screws with a T5 Torx Screwdriver.

Step 6 

© iFixit — CC BY-NC-SA

www.iFixit.com

Once the screws are removed, use the plastic opening tool to remove the black casing.

Page 5 of 7

Motorola Q Global Camera Replacement

Step 7



Remove both screws on the mounted surface with a T5 screwdriver.

Step 8



Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 6 of 7

Motorola Q Global Camera Replacement

Step 9 

Use the plastic opening tool to lift the camera from the phone.



The new camera can now be attached to the motherboard.

Step 10

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-30 01:04:37 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 7 of 7