Mt. Fury Roadmaster Pedal Replacement

Mt. Fury Roadmaster Pedal Replacement

Mt. Fury Roadmaster Pedal Replacement This guide will serve to assist in removing and replacing the pedal from the Mt. Fury Roadmaster.

Written By: Samantha Rawlins

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Mt. Fury Roadmaster Pedal Replacement

INTRODUCTION If you have a broken pedal or desire pedal clips this guide will assist you in removing and replacing your pedals.

TOOLS:

PARTS:

15mm open-end wrench (1)

Pedal (2)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Mt. Fury Roadmaster Pedal Replacement

Step 1 — Pedal 

Flip the bicycle upside down so that the bicycle rests on the seat and handlebars. The bike should be able to stay standing on its own.

Step 2



Locate the 15mm pedal nut, and position the crank arms for maximum leverage.



Using a 15mm open-end wrench, brace the opposite pedal with your other hand and remove the pedal nut from the crank arm.

 A considerable amount of force may be required to break pedal nut free. To install new pedal, follow these instructions in reverse order. This document was last generated on 2017-06-21 03:34:16 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Mt. Fury Roadmaster Pedal Replacement

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4