N67 ENT HW21 AWS
INDUSTRIAL AND AGRICULTURAL APPLICATIONS
NEF
N67 ENT HW21
SERIES
Stage IV - Tier 4B
Specifications Thermodynamic cycle Air handling Arrangement Bore x Stroke Total displacement Valves per cylinders Cooling Direction of rotation (viewed facing flywheel) Compression ratio Injection system
mm (inch) l (cid) n°
Diesel 4 stroke Turbo Charged with Aftercooler 6L 104 x 132 (4.1 X 5.2) 6.7 (409) 4 Liquid Counterclockwise 18:1 Direct - Electronic Common Rail
Performances Rated power [*] At speed Peak power At speed Peak torque At speed Minimum starting temperature without auxiliaries Oil and oil filter maintenance interval for replacement [**] Dry weight (standard configuration without: oil, cooling, clutch, A/C Compressor)
kW (Bhp) rpm kW (Bhp) rpm Nm (Ft/lb) rpm °C (°F) hours kg (Lbs)
151 (202) 2200 165 (221) 1800 940 (693) 1500 -15 (5) 600 530 (1168)
FOR INFORMATION ON THE AVAILABLE RATINGS NOT LISTED IN THIS DOCUMENT PLEASE CONTACT THE FPT SALES NETWORK. [*] Power at flywheel according to 97/68 EC (without fan), after 50 hours running, 3% tolerance, Fuel Diesel EN 590. [**] Oil type: Approved engine oil specification: 10W-40 ACEA E9 / API CJ-4 low SAPs or 5W-30 ACEA E6 (for ambient temperature below -25°C (-13°F)). Test conditions: ISO 3046/1, 25 °C (77°F) air temperature, 100 kPa (14.5 PSI) atmospheric pressure, 30% relative humidity - Applicable also to DIN 6271, BS 5514, SAE J1349 Standards. .
Dimensions:
L = 1062 mm (41.8 inch) W = 687 mm (27.1 inch) H = 1049 mm (41.3 inch)
Engine layout for reference only
N67 ENT - Stage IV / Tier 4B - INDUSTRIAL AND AGRICULTURAL APPLICATIONS
151 kW (202 Bhp) @ 2200 rpm - 940 Nm (693 Ft/lb) @ 1500 rpm
type inch
Flywheel housing Flywheel size Intake manifold location Exhaust manifold location Turbocharger Turbocharger location Fan transmission ratio Distance between fan - crankshaft centers Fuel filter Oil filter Oil sump
Rear, Cast iron, SAE #3 for 11,5" clutch high / left side high / right side / middle flange Waste Gate valve with exhaust flap high / right side / back exhaust 1.1 : 1 x = 0 ; y = 296 single cartridge - left side single cartridge - right side Stamped steel - front well - elastic suspension -35° angularity coalascent filter mounted on flywheel housing oil / water engine cooler on valve cover - front position 24V 4kW, right side mounted Bosch 70 A - 24V, right side mounted engine harness connected to ECU Gray - RAL 7021
mm
Oil vapours blow-by circuit Oil heat exchanger Oil filler Starter Alternator Wiring harness Painting
color
Not included in the standard configuration PTO - transmission ratio PTO maximum available torque
1.03 : 1 100Nm (74 Ft/lb) (9 teeth) - 150Nm (111 Ft/lb) (11 teeth) 240Nm (177Ft/lb) (13 teeth) 130Ah (24V)
SAE A SAE B
Battery - minimum capacity recommended Battery - minimum cold cranking capacity recommended (below -25°C lube oil for cold conditions needed)
500A (24V)
Aftertreatment System Urea tank
CO
Supply module
Control unit
NOX PM
HC
Dosing module HO
NH NOx
AdBlue® / DEF
N
CO
HO
PM Particulate Matter HC unburnt Hydrocarbons NO x Nitrogen Oxides CO Carbon Monoxide N2 Nitrogen CO 2 Carbon Dioxide H2 O Water AdBlue®/ DEF = CO(NH2)2 + H2O
FPT OFFERS THE WIDEST AVAILABILITY OF ENGINE BUILD OPTIONS TO CUSTOMER SPECIFIC REQUIREMENTS WITHIN THE ENGINE SUPPLY. TO FIND OUT MORE ABOUT THE CONFIGURATIONS AND ACCESSORIES WHICH ARE AVAILABLE, CONTACT THE FPT SALES NETWORK.
Publication - P2G06N034E- 07.16 Specifications subject to change without notice. Illustrations may include optional equipment
N
Mixer
N67 ENT - Stage IV / Tier 4B - INDUSTRIAL AND AGRICULTURAL APPLICATIONS
Standard configuration
NEF
N67 ENT HW21
SERIES
Stage IV - Tier 4B
Specifications Thermodynamic cycle Air handling Arrangement Bore x Stroke Total displacement Valves per cylinders Cooling Direction of rotation (viewed facing flywheel) Compression ratio Injection system
mm (inch) l (cid) n°
Diesel 4 stroke Turbo Charged with Aftercooler 6L 104 x 132 (4.1 X 5.2) 6.7 (409) 4 Liquid Counterclockwise 18:1 Direct - Electronic Common Rail
Performances Rated power [*] At speed Peak power At speed Peak torque At speed Minimum starting temperature without auxiliaries Oil and oil filter maintenance interval for replacement [**] Dry weight (standard configuration without: oil, cooling, clutch, A/C Compressor)
kW (Bhp) rpm kW (Bhp) rpm Nm (Ft/lb) rpm °C (°F) hours kg (Lbs)
151 (202) 2200 165 (221) 1800 940 (693) 1500 -15 (5) 600 530 (1168)
FOR INFORMATION ON THE AVAILABLE RATINGS NOT LISTED IN THIS DOCUMENT PLEASE CONTACT THE FPT SALES NETWORK. [*] Power at flywheel according to 97/68 EC (without fan), after 50 hours running, 3% tolerance, Fuel Diesel EN 590. [**] Oil type: Approved engine oil specification: 10W-40 ACEA E9 / API CJ-4 low SAPs or 5W-30 ACEA E6 (for ambient temperature below -25°C (-13°F)). Test conditions: ISO 3046/1, 25 °C (77°F) air temperature, 100 kPa (14.5 PSI) atmospheric pressure, 30% relative humidity - Applicable also to DIN 6271, BS 5514, SAE J1349 Standards. .
Dimensions:
L = 1062 mm (41.8 inch) W = 687 mm (27.1 inch) H = 1049 mm (41.3 inch)
Engine layout for reference only
N67 ENT - Stage IV / Tier 4B - INDUSTRIAL AND AGRICULTURAL APPLICATIONS
151 kW (202 Bhp) @ 2200 rpm - 940 Nm (693 Ft/lb) @ 1500 rpm
type inch
Flywheel housing Flywheel size Intake manifold location Exhaust manifold location Turbocharger Turbocharger location Fan transmission ratio Distance between fan - crankshaft centers Fuel filter Oil filter Oil sump
Rear, Cast iron, SAE #3 for 11,5" clutch high / left side high / right side / middle flange Waste Gate valve with exhaust flap high / right side / back exhaust 1.1 : 1 x = 0 ; y = 296 single cartridge - left side single cartridge - right side Stamped steel - front well - elastic suspension -35° angularity coalascent filter mounted on flywheel housing oil / water engine cooler on valve cover - front position 24V 4kW, right side mounted Bosch 70 A - 24V, right side mounted engine harness connected to ECU Gray - RAL 7021
mm
Oil vapours blow-by circuit Oil heat exchanger Oil filler Starter Alternator Wiring harness Painting
color
Not included in the standard configuration PTO - transmission ratio PTO maximum available torque
1.03 : 1 100Nm (74 Ft/lb) (9 teeth) - 150Nm (111 Ft/lb) (11 teeth) 240Nm (177Ft/lb) (13 teeth) 130Ah (24V)
SAE A SAE B
Battery - minimum capacity recommended Battery - minimum cold cranking capacity recommended (below -25°C lube oil for cold conditions needed)
500A (24V)
Aftertreatment System Urea tank
CO
Supply module
Control unit
NOX PM
HC
Dosing module HO
NH NOx
AdBlue® / DEF
N
CO
HO
PM Particulate Matter HC unburnt Hydrocarbons NO x Nitrogen Oxides CO Carbon Monoxide N2 Nitrogen CO 2 Carbon Dioxide H2 O Water AdBlue®/ DEF = CO(NH2)2 + H2O
FPT OFFERS THE WIDEST AVAILABILITY OF ENGINE BUILD OPTIONS TO CUSTOMER SPECIFIC REQUIREMENTS WITHIN THE ENGINE SUPPLY. TO FIND OUT MORE ABOUT THE CONFIGURATIONS AND ACCESSORIES WHICH ARE AVAILABLE, CONTACT THE FPT SALES NETWORK.
Publication - P2G06N034E- 07.16 Specifications subject to change without notice. Illustrations may include optional equipment
N
Mixer
N67 ENT - Stage IV / Tier 4B - INDUSTRIAL AND AGRICULTURAL APPLICATIONS
Standard configuration
