C87 ENT HW21
INDUSTRIAL AND AGRICULTURAL APPLICATIONS
CURSOR
C87 ENT HW21
SERIES
Stage IV - Tier 4B
Specifications Thermodynamic cycle Air handling Arrangement Bore x Stroke Total displacement Valves per cylinders Cooling Direction of rotation (viewed facing flywheel) Compression ratio Injection system
mm (inch) l (cid) n°
Diesel 4 stroke Turbo Charged with Aftercooler 6L 117 x 135 (4.6 X 5.3) 8.7 (531) 4 Liquid Counterclockwise 15,9:1 Direct - Electronic Common Rail
Performances Rated power [*] At speed Peak power At speed Peak torque At speed Minimum starting temperature without auxiliaries Oil and oil filter maintenance interval for replacement [**] Dry weight (standard configuration without: oil, cooling, clutch, A/C Compressor)
kW (Bhp) rpm kW (Bhp) rpm Nm (Ft/lb) rpm °C (°F) hours
245 (328) 2100 275 (368) 1800 1510 (1114) 1500 -15 (5) 600
kg (Lbs)
870 (1918)
FOR INFORMATION ON THE AVAILABLE RATINGS NOT LISTED IN THIS DOCUMENT PLEASE CONTACT THE FPT SALES NETWORK. [*] Power at flywheel according dir. 97/68 EC (w/o fan), after 50 hours of run-in, tolerance ±3%, fuel EN 590. [**] Oil type: Approved engine oil specification: 10W-40 ACEA E9 / API CH-4 low SAPs or 0W-40 (for ambient temperature below -25°C (-13°F)). Test conditions: ISO 3046/1, 25 °C (77°F) air temperature, 100 kPa (14.5 PSI) atmospheric pressure, 30% relative humidity - Applicable also to DIN 6271, BS 5514, SAE J1349 Standards. .
Dimensions:
L = 1216 mm (47.9 inch) W = 883 mm (34.8 inch) H = 1007 mm (39.6 inch)
Engine layout for reference only
C87 ENT - Stage IV / Tier 4B - INDUSTRIAL AND AGRICULTURAL APPLICATIONS
245 kW (328 Bhp) @ 2100 rpm - 1510 Nm (1114 Ft/lb) @ 1500 rpm
type inch
Flywheel housing Flywheel size Intake manifold location Exhaust manifold location Turbocharger Turbocharger location Fan transmission ratio Distance between fan - crankshaft centers Fuel filter Oil filter Oil sump
Rear, Cast iron, SAE #1 for 14" clutch high / right side high / left side / middle flange Waste Gate valve with exhaust flap middle high / left side / back exhaust 1.03 : 1 x = -38 ; y = 250 Single cartrige on engine, rear position, right side single cartrige, rear left side stamped steel - central well - elastic suspension -19° angularity Centrifugal filter mounted on front of cylinder head oil / water engine cooler On valve cover, rear position Denso 4.5 kW - 24 V, right side high mounted Mitsubishi 90A - 24V, right side high mounted engine harness connected to ECU Gray - RAL 7021
mm
Oil vapours blow-by circuit Oil heat exchanger Oil filler Starter Alternator Wiring harness Painting
color
Not included in the standard configuration 1.36 : 1
PTO - transmission ratio PTO maximum available torque
SAE A
120Nm (89 Ft/lb) (9 teeth) 120Nm (89 Ft/lb) (13 teeth) 180Nm (133 Ft/lb) (DIN 5482) 180Nm (133 Ft/lb) (15 teeth ANSI B92,1) 180Ah (24V)
SAE B SAE 2B Battery - minimum capacity recommended Battery - minimum cold cranking capacity recommended (below -25°C lube oil for cold conditions needed)
800A (24V)
Aftertreatment System Urea tank
CO
Supply module
Control unit
NOX PM
HC
Dosing module HO
NH NOx
AdBlue® / DEF
N
CO
HO
PM Particulate Matter HC unburnt Hydrocarbons NO x Nitrogen Oxides CO Carbon Monoxide N2 Nitrogen CO 2 Carbon Dioxide H2 O Water AdBlue®/ DEF = CO(NH2)2 + H2O
FPT OFFERS THE WIDEST AVAILABILITY OF ENGINE BUILD OPTIONS TO CUSTOMER SPECIFIC REQUIREMENTS WITHIN THE ENGINE SUPPLY. TO FIND OUT MORE ABOUT THE CONFIGURATIONS AND ACCESSORIES WHICH ARE AVAILABLE, CONTACT THE FPT SALES NETWORK.
Publication - P2G06C024E- 07.16 Specifications subject to change without notice. Illustrations may include optional equipment
N
Mixer
C87 ENT - Stage IV / Tier 4B - INDUSTRIAL AND AGRICULTURAL APPLICATIONS
Standard configuration
CURSOR
C87 ENT HW21
SERIES
Stage IV - Tier 4B
Specifications Thermodynamic cycle Air handling Arrangement Bore x Stroke Total displacement Valves per cylinders Cooling Direction of rotation (viewed facing flywheel) Compression ratio Injection system
mm (inch) l (cid) n°
Diesel 4 stroke Turbo Charged with Aftercooler 6L 117 x 135 (4.6 X 5.3) 8.7 (531) 4 Liquid Counterclockwise 15,9:1 Direct - Electronic Common Rail
Performances Rated power [*] At speed Peak power At speed Peak torque At speed Minimum starting temperature without auxiliaries Oil and oil filter maintenance interval for replacement [**] Dry weight (standard configuration without: oil, cooling, clutch, A/C Compressor)
kW (Bhp) rpm kW (Bhp) rpm Nm (Ft/lb) rpm °C (°F) hours
245 (328) 2100 275 (368) 1800 1510 (1114) 1500 -15 (5) 600
kg (Lbs)
870 (1918)
FOR INFORMATION ON THE AVAILABLE RATINGS NOT LISTED IN THIS DOCUMENT PLEASE CONTACT THE FPT SALES NETWORK. [*] Power at flywheel according dir. 97/68 EC (w/o fan), after 50 hours of run-in, tolerance ±3%, fuel EN 590. [**] Oil type: Approved engine oil specification: 10W-40 ACEA E9 / API CH-4 low SAPs or 0W-40 (for ambient temperature below -25°C (-13°F)). Test conditions: ISO 3046/1, 25 °C (77°F) air temperature, 100 kPa (14.5 PSI) atmospheric pressure, 30% relative humidity - Applicable also to DIN 6271, BS 5514, SAE J1349 Standards. .
Dimensions:
L = 1216 mm (47.9 inch) W = 883 mm (34.8 inch) H = 1007 mm (39.6 inch)
Engine layout for reference only
C87 ENT - Stage IV / Tier 4B - INDUSTRIAL AND AGRICULTURAL APPLICATIONS
245 kW (328 Bhp) @ 2100 rpm - 1510 Nm (1114 Ft/lb) @ 1500 rpm
type inch
Flywheel housing Flywheel size Intake manifold location Exhaust manifold location Turbocharger Turbocharger location Fan transmission ratio Distance between fan - crankshaft centers Fuel filter Oil filter Oil sump
Rear, Cast iron, SAE #1 for 14" clutch high / right side high / left side / middle flange Waste Gate valve with exhaust flap middle high / left side / back exhaust 1.03 : 1 x = -38 ; y = 250 Single cartrige on engine, rear position, right side single cartrige, rear left side stamped steel - central well - elastic suspension -19° angularity Centrifugal filter mounted on front of cylinder head oil / water engine cooler On valve cover, rear position Denso 4.5 kW - 24 V, right side high mounted Mitsubishi 90A - 24V, right side high mounted engine harness connected to ECU Gray - RAL 7021
mm
Oil vapours blow-by circuit Oil heat exchanger Oil filler Starter Alternator Wiring harness Painting
color
Not included in the standard configuration 1.36 : 1
PTO - transmission ratio PTO maximum available torque
SAE A
120Nm (89 Ft/lb) (9 teeth) 120Nm (89 Ft/lb) (13 teeth) 180Nm (133 Ft/lb) (DIN 5482) 180Nm (133 Ft/lb) (15 teeth ANSI B92,1) 180Ah (24V)
SAE B SAE 2B Battery - minimum capacity recommended Battery - minimum cold cranking capacity recommended (below -25°C lube oil for cold conditions needed)
800A (24V)
Aftertreatment System Urea tank
CO
Supply module
Control unit
NOX PM
HC
Dosing module HO
NH NOx
AdBlue® / DEF
N
CO
HO
PM Particulate Matter HC unburnt Hydrocarbons NO x Nitrogen Oxides CO Carbon Monoxide N2 Nitrogen CO 2 Carbon Dioxide H2 O Water AdBlue®/ DEF = CO(NH2)2 + H2O
FPT OFFERS THE WIDEST AVAILABILITY OF ENGINE BUILD OPTIONS TO CUSTOMER SPECIFIC REQUIREMENTS WITHIN THE ENGINE SUPPLY. TO FIND OUT MORE ABOUT THE CONFIGURATIONS AND ACCESSORIES WHICH ARE AVAILABLE, CONTACT THE FPT SALES NETWORK.
Publication - P2G06C024E- 07.16 Specifications subject to change without notice. Illustrations may include optional equipment
N
Mixer
C87 ENT - Stage IV / Tier 4B - INDUSTRIAL AND AGRICULTURAL APPLICATIONS
Standard configuration
