Nokero N400 Suction cup Replacement
Nokero N400 Suction cup Replacement
Nokero N400 Suction cup Replacement In this guide we walk you through the steps in replacing the suction cup on your Nokero N400.
Written By: Daniel Bumiller
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Nokero N400 Suction cup Replacement
INTRODUCTION If the suction cup no longer sticks to surfaces or if the plastic has split, you will need to replace the suction cup with a new one.
TOOLS:
PARTS:
Tweezers (1)
Suction Handle (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Nokero N400 Suction cup Replacement
Step 1 — Remove Battery Cover
Press down firmly to remove battery cover and display battery.
Then remove the battery.
Step 2 — Unscrew Back Cover
Use a Phillips #1 screwdriver to remove the 7mm Phillips #1 screw marked on the photo.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Nokero N400 Suction cup Replacement
Step 3 — Pry Open Back Cover
Place plastic opening tool in between the two plastic panels and slowly work your way around the device.
Unlatch clips on the inside and pull device apart.
Some clips will break when forced open. Step 4 — Begin Removal
Using the tweezers push the edges of the back end of the Suction cup inward
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
Nokero N400 Suction cup Replacement
Step 5 — Remove Suction Cup
Flip the cover over and remove the Suction cup by pulling at an angle
Be careful not to tear the plastic housing During reassembly, make sure to press down uniformly on the suction cup for an even fit To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 08:38:49 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
Nokero N400 Suction cup Replacement In this guide we walk you through the steps in replacing the suction cup on your Nokero N400.
Written By: Daniel Bumiller
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Nokero N400 Suction cup Replacement
INTRODUCTION If the suction cup no longer sticks to surfaces or if the plastic has split, you will need to replace the suction cup with a new one.
TOOLS:
PARTS:
Tweezers (1)
Suction Handle (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Nokero N400 Suction cup Replacement
Step 1 — Remove Battery Cover
Press down firmly to remove battery cover and display battery.
Then remove the battery.
Step 2 — Unscrew Back Cover
Use a Phillips #1 screwdriver to remove the 7mm Phillips #1 screw marked on the photo.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Nokero N400 Suction cup Replacement
Step 3 — Pry Open Back Cover
Place plastic opening tool in between the two plastic panels and slowly work your way around the device.
Unlatch clips on the inside and pull device apart.
Some clips will break when forced open. Step 4 — Begin Removal
Using the tweezers push the edges of the back end of the Suction cup inward
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
Nokero N400 Suction cup Replacement
Step 5 — Remove Suction Cup
Flip the cover over and remove the Suction cup by pulling at an angle
Be careful not to tear the plastic housing During reassembly, make sure to press down uniformly on the suction cup for an even fit To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 08:38:49 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
