Parts Included

Parts Included Part Label 1270MM X 30MM TUBE R2250 (1163MM ARC) CURVED TUBE 30MM CURVED TUBE WITH PART T AND 90B LEFT SIDE 30MM CURVED TUBE WITH PART T AND 90B RIGHT SIDE (2)128MM TUBES SWAGED WITH PART TC-30-T (2)128MM TUBES SWAGED WITH PART TC-30-T (2) 128MM TUBES SWAGED WITH PART TC-30-X R2250 X 30MM TUBE WITH WELDED SWAGE RIGHT SIDE 30MM LEG TUBE WITH LEVELING FOOT (2) 67MM TUBES SWAGED WITH PART TC-30-T AND SPACER (2) 67MM TUBES SWAGED WITH PART TC-30-X STEEL PLATE FOR WVC 20’ FABRIC GRAPHIC

Qty x12 x7 x1 x1 x2 x2 x2 x1 x1 x1 x1 x2 x1

Part Code WV10-01-T1 WV10-01-T2 WV10-01-T2-L WV10-01-T2-R WV10-01-04 WV10-01-T7 WV10-01-T5 WV10-01-T6-PART C WV10-01-T7-V2 WV20-01-T7 WV20-01-T2 WVC-PLATE-STD WV20-01-G

Parts Included Part Label FABRIC GRAPHIC LN114 BOLT 90 DEGREE ELBOW JOINT FOR 30MM TUBING 1270MM X 30MM TUBE 30MM CURVED TUBE WITH PART T AND 90B LEFT SIDE 30MM CURVED TUBE WITH PART T AND 90B RIGHT SIDE R2250 (1163MM ARC) CURVED TUBE (2) 128MM TUBES SWAGED WITH PART TC-30-T (2) 128MM TUBES SWAGED WITH PART TC-30-X STEEL PLATE FOR WVC

Qty x1 x2 x2 x6 x1 x1 x4 x2 x1 x2

Part Code WV10-01-G LN114 BOLT TC-30-90 WV10-01-T1 WV10-01-T2-L WV10-01-T2-R WV10-01-T2 WV10-01-T7 WV10-01-T5 WVC-PLATE-STD

STEP 1: ASSEMBLE FRAME

Connect tubes following the labels matching number to number.

STEP 2: ATTACH FEET

Install WVC-PLATE-STD feet with 6mm Allen key.

Assemble top frame corners using TC-30-90. Label codes will be on backside of tube. Lay frame flat.

Connect top and bottom sides of frame by lining up holes with snap buttons.

Use WV10-01-T5 to connect middle frame sections, snap on buttons.

Zip graphic closed along bottom.

Unit is complete.

STEP 3: APPLY GRAPHIC

Pull graphic over top of frame.