PB Series - Power Dynamics, Inc.
PB Series STRAIGHT, SNAP-IN/FLANGE MOUNT FILTER WITH IEC 60320 AC INLET SOCKET.
MECHANICAL DIMENSIONS (Unit: mm) FLANGE MOUNT 50.1
40.0
30.3
28.5 4-R5
22.5
21.6 240.0
3.3
45.5
3.5 SUGGESTED PANEL CUTOUT (MOUNTING FROM FRONT)
41.4
46.8
55.8
G 20.6
28.3
SNAP-IN (SNT)
FEATURES
31.0
The PB series, similar to PA and PASP series, offers filters with IEC connector providing effective equipment protection of line-to-ground noise up to 15 Amp, 250VAC. The compact design filter with low leakage current is well suited for applications that require strict national and international emission standards. These filters are also available for Medical application and offer extremely low Leakage current to comply with UL544, UL2601 and CSA22.2 standards. A ground choke can be added to enhance the grounding ability of the circuit. Bleeder resistor can also be added to prevent excessive voltages from developing across the filter capacitors when there is no load.
24.0
4-R2 28.5
29.6
SUGGESTED PANEL CUTOUT** SUGGESTED PANEL CUTOUT** (MOUNTING FROM FRONT) (MOUNTING FROM FRONT) SNT Option SSI Option
3.75
55.2
43.6
20.6
28.3
FLANGE MOUNT (B) 52
TECHNICAL DATA
40.0
40
• Rated Voltage: 115/250VAC • Rated Current: 1A, 2A, 3A, 6A, 8A, 10A, 15A • Power Line Frequency: 50/60Hz • Max. Leakage Current each Line to Ground: @ 115VAC 60Hz: 0.25mA @ 250VAC 50Hz: 0.45mA @ 115VAC 60Hz: 2µA* @ 250VAC 50Hz: 5µA* • Hipot Rating (one minute) Line to Ground: 2250VDC Line to Line: 1450VDC • Temperature Range: -25C to +85C * Medical application; ** Thickness of Panel is from 1.00mm to 1.6mm
8
21.2
4-R2
APPLICATIONS
Computer & networking equipment, Measuring & control equipment, Data processing equipment, laboratory instruments, Switching power supplies, other electronic equipment.
21.9
28.5 4-R5 21.6
25 2-
30.3
3.3
45.5
3.5 SUGGESTED PANEL CUTOUT (MOUNTING FROM FRONT)
41.4
46.8
55.8
G 28.3
20.6
Specifications subject to change without notice. Dimensions (mm). See Appendix A for recommended power cord. See PDI full line catalog for detailed specifications on power cords.
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com
PB Series Example & Ordering Code C
SCHEMATICS
01 02 03 06 08 10 15*
1 L mH
L LINE
= = = = = = =
CURRENT RATING (A):
Q - 50 - 1
R
Cy
CX
L
Cy
N
L' G'
LOAD
PB 01
N' L mH
G Lg
4.0/0.187
8.0 2.0 -3.0L 6.6
UL 1015, 18AWG STRANDED, 4”
QUICK CONNECT
2
=Q
SOLDER
=S
WIRE
=W
L mH
L
Cy
R
L
Cy
N
L' G'
LOAD
6.3/0.25
3.0 -3.6L
LINE
TERMINAL:
N' L mH
G Lg
3
Inductance Per Current Rating 2A 3A 6A 3.8 2.5 0.8 1.5 1.1 0.6 2.7 1.8 0.8 4.2 2.5 1.05 3.4 2.5 0.9 4.3 1.8 0.85 4.0 1.2 0.53 3.7 1.8 0.6 6.5 2.5 1.05 4.0 2.5 0.8 4.0 2.5 0.8
(mH)
8A 1.05 ✘
1.05 ✘ ✘ ✘ ✘ ✘ ✘
1.05 1.05
Lg
1 2✢ 3✢ 4✢ 1M 2M✢
4
10A 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.2 0.3 0.3 0.3
15A 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
Inductance Per Current Rating (mH) 2A 3A 6A 8A 3.8 2.5 0.8 1.05 ✘ 1.5 1.1 0.6 ✘ ✘ 2.7 1.8 ✘ 3.4 2.5 0.9 ✘ 4.3 1.8 0.85 4.0 2.5 0.8 1.05 ✘ 4 1.2 0.53 ✘ ✘ 3.7 0.6
10A 0.2 0.3 0.3 0.3 0.3 0.3
R
L'
L
N
N' L mH
G
G'
Lg
= = = = = = = = = = =
A B C D E F G H I J✢ K✢
MEDICAL SCHEMATICS 1M
L mH
L R
CX
L'
L
N
N' L mH
G
G'
Lg
15A 0.2 0.2 ✘
0.2 0.2 0.2
✘
✘
0.2
✘
= = = = = = = =
M1 M2 M3 M4 M5 M6 M7 M8
2M
L mH
L LINE
1A 6.5 1.9 3.7 4.6 9.5 6.5 10.5 5
L mH
L
Medical applications, select Attenuation code with corresponding component values from the table. Cx (µF) 0.1 0.015 0.1 0.047 0.033 0.22 0.047 0.033
N'
L mH
LOAD
= = = = = =
LINE
1A 6.5 1.9 3.7 10.5 4.6 9.5 10.5 5.0 10.5 6.5 6.5
Cy
L' G'
LOAD
STANDARD TYPE WITHOUT C(X); C(Y) ONLY C(X) & C(Y) BEHIND L WITHOUT C(X) & C(Y) WITHOUT C(Y); C(X) ONLY WITHOUT C(Y); C(X) BEHIND L
Cy
CX
L
N
ATTENUATION CODE TABLE: Non-Medical applications, select Attenuation code with corresponding component values from the table. Cy (pF) 2200 3300 3300 1000 3300 3300 2200 2200 without Cy 2200 3300
R
G
COMPONENT LOCATIONS:
Cx (µF) 0.1 0.015 0.1 0.1 0.047 0.033 0.047 0.033 without Cx 0.22 0.22
L mH
L
LOAD
00 50✢✢ 60 70✢✢ 80 90
R
L
N
L' LOAD
= = = = = =
LINE
NO BLEEDER RESISTOR & GROUND CHOKE BLEEDER RESISTOR (1/4 W, 1M) BLEEDER RESISTOR (1/2 W, 1M) BLEEDER RESISTOR (1/4 W, 1M) & GROUND CHOKE BLEEDER RESISTOR (1/2 W, 1M) & GROUND CHOKE GROUND CHOKE (100µH)
LINE
OPTIONS:
CX N'
L mH
G
G'
Lg
Contact PDI for attenuation numbers Contact PDI for availability ✢✢ N/A for 15A *15A for UL, cUL; 10A for CE, VDE ✢ ✘
TYPE OF MOUNTING:
STANDARD FLANGE MOUNT
= BLANK
SPECIAL FLANGE MOUNT
=B
SNAP-IN TABS - TOP BOTTOM
= SNT
SNAP-IN TABS - SIDE
= SSI
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com
9
PB Series Attenuation Tables Non-Medical Applications❖
Medical Applications✧
Insertion loss in dB (50 Ohm circuit)
Insertion loss in dB (50 Ohm circuit)
Attenuation Current Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz Code Rating .15 .5 1 5 10 30 .15 .5 1 5 10 30 1A 34 38 40 32 26 11 8 25 37 71 62 12 2A 29 32 55 48 49 51 8 23 34 68 64 14 3A 28 36 39 45 48 39 8 19 27 58 65 15 6A 18 24 28 44 50 47 8 18 26 43 51 31 10A 8 14 18 33 41 39 8 18 25 29 38 31 15A 7 14 19 34 40 38 7 17 23 39 47 27
A B
1A 2A 3A 6A 10A 15A
25 24 19 15 11 7
31 28 22 24 18 15
33 20 24 30 23 20
30 53 27 44 39 38
25 54 27 52 49 46
14 55 22 40 37 37
1 1 1 1 1 1
C
1A 2A 3A 6A 10A 15A
29 28 25 19 11 7
33 37 33 29 19 15
47 44 46 36 24 21
53 52 53 49 41 37
57 56 57 55 53 46
41 41 44 46 36 36
8 8 8 8 8 7
23 19 19 18 18 17
35 27 29 23 24 23
73 74 63 50 51 39
58 59 62 54 46 48
14 17 13 24 25 27
D
1A 2A 3A 6A 10A 15A
36 36 28 21 12 7
41 41 35 28 16 13
41 41 37 31 19 16
49 49 41 41 45 28
49 49 42 44 37 32
46 46 42 41 41 37
8 8 8 8 8 7
23 23 19 18 18 17
33 33 28 25 24 24
62 62 56 45 52 32
62 62 57 48 53 32
32 32 17 29 30 30
1A 2A 3A 6A 10A 15A
32 29 28 18 11 7
39 34 38 25 19 14
55 46 44 31 24 20
55 56 51 49 40 39
56 58 58 56 50 45
52 49 39 47 40 37
3 3 3 3 3 3
14 15 12 11 12 11
25 27 20 17 17 17
75 67 66 55 48 50
63 59 57 59 46 46
24 21 18 32 29 29
1A 2A 3A 6A 10A 15A
36 32 23 19 11 4
41 39 29 29 19 15
62 56 35 35 25 21
54 56 53 51 40 36
50 58 52 54 51 44
36 58 40 49 39 38
G
1A 2A 3A 6A 10A 15A
36 31 20 14 11 4
41 37 25 19 17 14
59 47 28 22 22 19
54 51 44 39 36 34
54 49 49 48 42 40
H
1A 2A 3A 6A 10A 15A
32 29 23 16 11 4
34 32 27 20 17 14
52 56 30 24 22 19
44 49 49 42 36 33
I
1A 2A 3A 6A 10A 15A
36 30 28 21 11 6
42 37 35 29 16 12
43 39 37 32 18 15
37 29 28 31 18 16
E F
Attenuation Current Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz Code Rating .15 .5 1 5 10 30 .15 .5 1 5 10 30 1A 34 38 39 32 16 21 9 26 37 62 51 11 2A 29 32 34 30 19 16 8 23 34 60 48 13 3A 28 35 37 28 22 19 8 19 28 52 44 12 6A 18 22 24 27 25 18 8 18 26 52 45 27 10A 8 13 15 17 16 14 8 18 25 32 28 24 15A 7 12 15 16 14 11 7 17 24 41 32 23
M1 M2
1A 2A 3A 6A 10A 15A
25 23 19 15 11 7
31 27 22 21 16 13
33 28 24 24 18 15
30 29 27 23 17 16
24 24 27 21 16 14
21 23 20 17 12 11
1 1 1 1 1 1
M3
1A 2A 3A 6A 10A
29 28 25 19 11
33 35 33 26 16
34 37 58 29 18
30 28 51 28 18
20 22 56 25 16
16 24 41 14 12
8 8 8 8 8
24 20 20 18 18
35 29 30 26 24
58 61 57 46 47
45 48 47 43 36
15 15 13 22 24
M4
1A 2A 3A 6A 10A
36 31 28 22 12
41 37 35 28 16
43 39 37 31 18
37 35 28 30 20
32 29 21 27 19
28 22 21 16 15
8 8 8 8 8
23 22 20 18 18
34 32 29 26 24
60 66 54 43 49
53 55 44 43 42
30 22 14 26 27
M5
1A 2A 3A 6A 10A 15A
32 29 28 18 11 7
37 33 35 23 16 13
40 34 37 25 18 15
35 30 28 27 18 16
29 16 22 26 17 14
23 21 23 20 14 11
3 3 3 3 3 3
15 16 13 12 11 11
25 27 22 19 17 17
74 57 59 48 42 43
58 50 48 49 38 30
21 20 16 30 27 22
1 11 22 64 70 29 1 10 21 76 62 23 1 9 17 66 65 33 2 8 13 47 57 28 2 9 14 46 51 29 1 8 14 50 46 26
M6
1A 2A 3A 6A 10A 15A
36 32 23 19 11 4
41 37 27 26 16 13
43 40 28 29 18 15
37 36 31 29 18 16
31 30 30 25 17 14
25 22 30 17 14 11
1 12 23 54 57 28 1 11 22 63 59 24 1 10 19 61 52 32 1 8 15 39 45 25 2 8 14 42 34 25 1 8 14 48 29 21
47 40 42 41 38 38
3 3 3 3 3 3
M7
1A 2A 3A 6A 10A
36 31 20 14 11
41 37 24 17 16
43 40 25 19 18
37 36 26 22 18
32 29 24 22 16
28 25 23 19 12
3 3 3 3 3
44 50 52 51 41 39
41 45 46 42 40 39
1 14 25 60 66 21 1 12 24 67 62 14 1 9 17 59 69 30 1 8 14 58 52 33 2 8 14 37 54 27 1 8 14 48 42 28
1A 2A 3A 6A 10A
32 29 23 16 11
36 33 26 19 16
37 34 28 21 18
28 31 31 24 18
19 20 30 24 17
11 17 31 21 14
1 14 26 53 42 16 1 13 24 61 50 14 1 9 19 54 53 29 2 8 15 56 38 33 2 8 14 41 34 25
31 22 22 27 17 15
36 27 31 17 14 11
1 1 1 1 1 1
4 12 50 64 16 4 13 53 57 16 3 8 48 59 31 4 8 36 52 28 4 8 26 46 24 4 8 25 48 28
15 14 12 11 11 12
2 1 1 1 1 1
26 24 19 17 17 17
5 3 2 1 1 1
68 69 61 48 39 38
17 14 11 7 5 1
71 63 57 50 55 42
23 21 18 12 3 3
32 26 27 33 27 28
M8
5 14 41 46 17 5 14 45 58 15 4 10 39 50 34 4 9 30 49 28 4 8 26 45 24 3 7 26 39 23
16 15 12 11 11
27 25 21 18 17
64 80 47 43 48
60 60 42 35 34
31 25 22 29 23
✧This
table applies to schematic 1M only. Visit our website or contact PDI for other schematic attenuation numbers.
33 13 12 23 9 6
❖This
table applies to schematic 1 only. Visit our website or contact PDI for other schematic attenuation numbers.
10
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com
MECHANICAL DIMENSIONS (Unit: mm) FLANGE MOUNT 50.1
40.0
30.3
28.5 4-R5
22.5
21.6 240.0
3.3
45.5
3.5 SUGGESTED PANEL CUTOUT (MOUNTING FROM FRONT)
41.4
46.8
55.8
G 20.6
28.3
SNAP-IN (SNT)
FEATURES
31.0
The PB series, similar to PA and PASP series, offers filters with IEC connector providing effective equipment protection of line-to-ground noise up to 15 Amp, 250VAC. The compact design filter with low leakage current is well suited for applications that require strict national and international emission standards. These filters are also available for Medical application and offer extremely low Leakage current to comply with UL544, UL2601 and CSA22.2 standards. A ground choke can be added to enhance the grounding ability of the circuit. Bleeder resistor can also be added to prevent excessive voltages from developing across the filter capacitors when there is no load.
24.0
4-R2 28.5
29.6
SUGGESTED PANEL CUTOUT** SUGGESTED PANEL CUTOUT** (MOUNTING FROM FRONT) (MOUNTING FROM FRONT) SNT Option SSI Option
3.75
55.2
43.6
20.6
28.3
FLANGE MOUNT (B) 52
TECHNICAL DATA
40.0
40
• Rated Voltage: 115/250VAC • Rated Current: 1A, 2A, 3A, 6A, 8A, 10A, 15A • Power Line Frequency: 50/60Hz • Max. Leakage Current each Line to Ground: @ 115VAC 60Hz: 0.25mA @ 250VAC 50Hz: 0.45mA @ 115VAC 60Hz: 2µA* @ 250VAC 50Hz: 5µA* • Hipot Rating (one minute) Line to Ground: 2250VDC Line to Line: 1450VDC • Temperature Range: -25C to +85C * Medical application; ** Thickness of Panel is from 1.00mm to 1.6mm
8
21.2
4-R2
APPLICATIONS
Computer & networking equipment, Measuring & control equipment, Data processing equipment, laboratory instruments, Switching power supplies, other electronic equipment.
21.9
28.5 4-R5 21.6
25 2-
30.3
3.3
45.5
3.5 SUGGESTED PANEL CUTOUT (MOUNTING FROM FRONT)
41.4
46.8
55.8
G 28.3
20.6
Specifications subject to change without notice. Dimensions (mm). See Appendix A for recommended power cord. See PDI full line catalog for detailed specifications on power cords.
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com
PB Series Example & Ordering Code C
SCHEMATICS
01 02 03 06 08 10 15*
1 L mH
L LINE
= = = = = = =
CURRENT RATING (A):
Q - 50 - 1
R
Cy
CX
L
Cy
N
L' G'
LOAD
PB 01
N' L mH
G Lg
4.0/0.187
8.0 2.0 -3.0L 6.6
UL 1015, 18AWG STRANDED, 4”
QUICK CONNECT
2
=Q
SOLDER
=S
WIRE
=W
L mH
L
Cy
R
L
Cy
N
L' G'
LOAD
6.3/0.25
3.0 -3.6L
LINE
TERMINAL:
N' L mH
G Lg
3
Inductance Per Current Rating 2A 3A 6A 3.8 2.5 0.8 1.5 1.1 0.6 2.7 1.8 0.8 4.2 2.5 1.05 3.4 2.5 0.9 4.3 1.8 0.85 4.0 1.2 0.53 3.7 1.8 0.6 6.5 2.5 1.05 4.0 2.5 0.8 4.0 2.5 0.8
(mH)
8A 1.05 ✘
1.05 ✘ ✘ ✘ ✘ ✘ ✘
1.05 1.05
Lg
1 2✢ 3✢ 4✢ 1M 2M✢
4
10A 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.2 0.3 0.3 0.3
15A 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
Inductance Per Current Rating (mH) 2A 3A 6A 8A 3.8 2.5 0.8 1.05 ✘ 1.5 1.1 0.6 ✘ ✘ 2.7 1.8 ✘ 3.4 2.5 0.9 ✘ 4.3 1.8 0.85 4.0 2.5 0.8 1.05 ✘ 4 1.2 0.53 ✘ ✘ 3.7 0.6
10A 0.2 0.3 0.3 0.3 0.3 0.3
R
L'
L
N
N' L mH
G
G'
Lg
= = = = = = = = = = =
A B C D E F G H I J✢ K✢
MEDICAL SCHEMATICS 1M
L mH
L R
CX
L'
L
N
N' L mH
G
G'
Lg
15A 0.2 0.2 ✘
0.2 0.2 0.2
✘
✘
0.2
✘
= = = = = = = =
M1 M2 M3 M4 M5 M6 M7 M8
2M
L mH
L LINE
1A 6.5 1.9 3.7 4.6 9.5 6.5 10.5 5
L mH
L
Medical applications, select Attenuation code with corresponding component values from the table. Cx (µF) 0.1 0.015 0.1 0.047 0.033 0.22 0.047 0.033
N'
L mH
LOAD
= = = = = =
LINE
1A 6.5 1.9 3.7 10.5 4.6 9.5 10.5 5.0 10.5 6.5 6.5
Cy
L' G'
LOAD
STANDARD TYPE WITHOUT C(X); C(Y) ONLY C(X) & C(Y) BEHIND L WITHOUT C(X) & C(Y) WITHOUT C(Y); C(X) ONLY WITHOUT C(Y); C(X) BEHIND L
Cy
CX
L
N
ATTENUATION CODE TABLE: Non-Medical applications, select Attenuation code with corresponding component values from the table. Cy (pF) 2200 3300 3300 1000 3300 3300 2200 2200 without Cy 2200 3300
R
G
COMPONENT LOCATIONS:
Cx (µF) 0.1 0.015 0.1 0.1 0.047 0.033 0.047 0.033 without Cx 0.22 0.22
L mH
L
LOAD
00 50✢✢ 60 70✢✢ 80 90
R
L
N
L' LOAD
= = = = = =
LINE
NO BLEEDER RESISTOR & GROUND CHOKE BLEEDER RESISTOR (1/4 W, 1M) BLEEDER RESISTOR (1/2 W, 1M) BLEEDER RESISTOR (1/4 W, 1M) & GROUND CHOKE BLEEDER RESISTOR (1/2 W, 1M) & GROUND CHOKE GROUND CHOKE (100µH)
LINE
OPTIONS:
CX N'
L mH
G
G'
Lg
Contact PDI for attenuation numbers Contact PDI for availability ✢✢ N/A for 15A *15A for UL, cUL; 10A for CE, VDE ✢ ✘
TYPE OF MOUNTING:
STANDARD FLANGE MOUNT
= BLANK
SPECIAL FLANGE MOUNT
=B
SNAP-IN TABS - TOP BOTTOM
= SNT
SNAP-IN TABS - SIDE
= SSI
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com
9
PB Series Attenuation Tables Non-Medical Applications❖
Medical Applications✧
Insertion loss in dB (50 Ohm circuit)
Insertion loss in dB (50 Ohm circuit)
Attenuation Current Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz Code Rating .15 .5 1 5 10 30 .15 .5 1 5 10 30 1A 34 38 40 32 26 11 8 25 37 71 62 12 2A 29 32 55 48 49 51 8 23 34 68 64 14 3A 28 36 39 45 48 39 8 19 27 58 65 15 6A 18 24 28 44 50 47 8 18 26 43 51 31 10A 8 14 18 33 41 39 8 18 25 29 38 31 15A 7 14 19 34 40 38 7 17 23 39 47 27
A B
1A 2A 3A 6A 10A 15A
25 24 19 15 11 7
31 28 22 24 18 15
33 20 24 30 23 20
30 53 27 44 39 38
25 54 27 52 49 46
14 55 22 40 37 37
1 1 1 1 1 1
C
1A 2A 3A 6A 10A 15A
29 28 25 19 11 7
33 37 33 29 19 15
47 44 46 36 24 21
53 52 53 49 41 37
57 56 57 55 53 46
41 41 44 46 36 36
8 8 8 8 8 7
23 19 19 18 18 17
35 27 29 23 24 23
73 74 63 50 51 39
58 59 62 54 46 48
14 17 13 24 25 27
D
1A 2A 3A 6A 10A 15A
36 36 28 21 12 7
41 41 35 28 16 13
41 41 37 31 19 16
49 49 41 41 45 28
49 49 42 44 37 32
46 46 42 41 41 37
8 8 8 8 8 7
23 23 19 18 18 17
33 33 28 25 24 24
62 62 56 45 52 32
62 62 57 48 53 32
32 32 17 29 30 30
1A 2A 3A 6A 10A 15A
32 29 28 18 11 7
39 34 38 25 19 14
55 46 44 31 24 20
55 56 51 49 40 39
56 58 58 56 50 45
52 49 39 47 40 37
3 3 3 3 3 3
14 15 12 11 12 11
25 27 20 17 17 17
75 67 66 55 48 50
63 59 57 59 46 46
24 21 18 32 29 29
1A 2A 3A 6A 10A 15A
36 32 23 19 11 4
41 39 29 29 19 15
62 56 35 35 25 21
54 56 53 51 40 36
50 58 52 54 51 44
36 58 40 49 39 38
G
1A 2A 3A 6A 10A 15A
36 31 20 14 11 4
41 37 25 19 17 14
59 47 28 22 22 19
54 51 44 39 36 34
54 49 49 48 42 40
H
1A 2A 3A 6A 10A 15A
32 29 23 16 11 4
34 32 27 20 17 14
52 56 30 24 22 19
44 49 49 42 36 33
I
1A 2A 3A 6A 10A 15A
36 30 28 21 11 6
42 37 35 29 16 12
43 39 37 32 18 15
37 29 28 31 18 16
E F
Attenuation Current Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz Code Rating .15 .5 1 5 10 30 .15 .5 1 5 10 30 1A 34 38 39 32 16 21 9 26 37 62 51 11 2A 29 32 34 30 19 16 8 23 34 60 48 13 3A 28 35 37 28 22 19 8 19 28 52 44 12 6A 18 22 24 27 25 18 8 18 26 52 45 27 10A 8 13 15 17 16 14 8 18 25 32 28 24 15A 7 12 15 16 14 11 7 17 24 41 32 23
M1 M2
1A 2A 3A 6A 10A 15A
25 23 19 15 11 7
31 27 22 21 16 13
33 28 24 24 18 15
30 29 27 23 17 16
24 24 27 21 16 14
21 23 20 17 12 11
1 1 1 1 1 1
M3
1A 2A 3A 6A 10A
29 28 25 19 11
33 35 33 26 16
34 37 58 29 18
30 28 51 28 18
20 22 56 25 16
16 24 41 14 12
8 8 8 8 8
24 20 20 18 18
35 29 30 26 24
58 61 57 46 47
45 48 47 43 36
15 15 13 22 24
M4
1A 2A 3A 6A 10A
36 31 28 22 12
41 37 35 28 16
43 39 37 31 18
37 35 28 30 20
32 29 21 27 19
28 22 21 16 15
8 8 8 8 8
23 22 20 18 18
34 32 29 26 24
60 66 54 43 49
53 55 44 43 42
30 22 14 26 27
M5
1A 2A 3A 6A 10A 15A
32 29 28 18 11 7
37 33 35 23 16 13
40 34 37 25 18 15
35 30 28 27 18 16
29 16 22 26 17 14
23 21 23 20 14 11
3 3 3 3 3 3
15 16 13 12 11 11
25 27 22 19 17 17
74 57 59 48 42 43
58 50 48 49 38 30
21 20 16 30 27 22
1 11 22 64 70 29 1 10 21 76 62 23 1 9 17 66 65 33 2 8 13 47 57 28 2 9 14 46 51 29 1 8 14 50 46 26
M6
1A 2A 3A 6A 10A 15A
36 32 23 19 11 4
41 37 27 26 16 13
43 40 28 29 18 15
37 36 31 29 18 16
31 30 30 25 17 14
25 22 30 17 14 11
1 12 23 54 57 28 1 11 22 63 59 24 1 10 19 61 52 32 1 8 15 39 45 25 2 8 14 42 34 25 1 8 14 48 29 21
47 40 42 41 38 38
3 3 3 3 3 3
M7
1A 2A 3A 6A 10A
36 31 20 14 11
41 37 24 17 16
43 40 25 19 18
37 36 26 22 18
32 29 24 22 16
28 25 23 19 12
3 3 3 3 3
44 50 52 51 41 39
41 45 46 42 40 39
1 14 25 60 66 21 1 12 24 67 62 14 1 9 17 59 69 30 1 8 14 58 52 33 2 8 14 37 54 27 1 8 14 48 42 28
1A 2A 3A 6A 10A
32 29 23 16 11
36 33 26 19 16
37 34 28 21 18
28 31 31 24 18
19 20 30 24 17
11 17 31 21 14
1 14 26 53 42 16 1 13 24 61 50 14 1 9 19 54 53 29 2 8 15 56 38 33 2 8 14 41 34 25
31 22 22 27 17 15
36 27 31 17 14 11
1 1 1 1 1 1
4 12 50 64 16 4 13 53 57 16 3 8 48 59 31 4 8 36 52 28 4 8 26 46 24 4 8 25 48 28
15 14 12 11 11 12
2 1 1 1 1 1
26 24 19 17 17 17
5 3 2 1 1 1
68 69 61 48 39 38
17 14 11 7 5 1
71 63 57 50 55 42
23 21 18 12 3 3
32 26 27 33 27 28
M8
5 14 41 46 17 5 14 45 58 15 4 10 39 50 34 4 9 30 49 28 4 8 26 45 24 3 7 26 39 23
16 15 12 11 11
27 25 21 18 17
64 80 47 43 48
60 60 42 35 34
31 25 22 29 23
✧This
table applies to schematic 1M only. Visit our website or contact PDI for other schematic attenuation numbers.
33 13 12 23 9 6
❖This
table applies to schematic 1 only. Visit our website or contact PDI for other schematic attenuation numbers.
10
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com
