pdf â fact sheet 8310
TECHNICAL BULLETIN
8310-BASIC-TB 09-13
MODELS 8310LP AND 8310HP PRESSURE REDUCING REGULATORS The Models 8310LP and 8310HP are high capacity, self-contained pressure reducing regulators with a double-seat design. These units are utilized to control outlet (downstream) pressure between 1 – 200 psig (.07 – 13.8 Barg). Available in two outlet pressure designs; the Low Pressure, LP design has larger diaphragm for reduced pressures up to 30 psig (2.07 Barg), and the High Pressure design has a smaller diaphragm for reduced pressures up to 200 psig (13.8 Barg).
FEATURES High Capacity:
The double ported design provides high flow capacity, the highest capacity regulators Cashco manufactures due to dual ports.
High Stability:
Outstanding operation resulting from balanced design which minimizes imbalance plug forces, even at very high pressure drops. Diaphragm isolated from fluid velocity effects.
Heavy Guiding:
Plug is top and bottom guided with hardened stem guides.
Broad Setpoint Range:
8310LP: 1 – 30 psig (.07 – 2.07 Barg) 8310HP: 10 – 200 psig (.7 – 13.8 Barg)
High Pressure Drop Capability:
8310LP: Up to 200 psid (13.8 Bard). 8310HP: Up to 450 psid (31.0 Bard).
Model 8310HP
Model 8310LP
APPLICATIONS Designed for controlling a wide range of fluids including air, inert gases, chemicals, water, fuel oils and steam. See Table 4 for more information.
STANDARD GENERAL SPECIFICATIONS Variations:
LP – “Low Pressure” variation, larger diaphragm area. HP – “High Pressure” variation, smaller diaphragm area.
Body Sizes:
1-1/2", 2", 2-1/2", 3" and 4" (DN40, 50, 65, 80, 100)
End Connections:
NPT – 1-1/2" and 2" (DN40, 50) sizes only. Opt-30: Integral Flanged: CI with 125 lb. FF, CS with 150 lb. RF CI with 250 lb. RF, CS with 300 lb. RF Flanges – all sizes. Opt-34: 14" Face to Face Flange Dim. (CS - Sizes 1-1/2" & 2" only)
Body / Spring Chamber Material Combinations:
8310HP: CI/DI, CS/CS 8310LP: CI/CI, CS/CS CI = Cast Iron DI = Ductile Iron. CS = Cast Carbon Steel.
Inlet Pressure:
8310LP: Up to 200 psig (13.8 Barg). 8310HP: Up to 650 psig (44.8 Barg).
Outlet Pressure:
8310LP: 1 – 30 psig (.07 – 2.07 Barg). 8310HP: 10 – 145 psig (.7 – 10 Barg). 8310HP-80: 130 – 200 psig (9.0 – 13.8 Barg).
External Sensing:
3/8" NPT steel needle valve for downstream sensing connection.
Inlet Temperature:
-20° to +450°F. (-29° to +233°C.)
Gaskets:
Standard: Gaskets – Graphite/ NBR, TFE/AL-Silicate. O-ring – TFE.
Seat Leakage:
FCI 70-2
Trim Design:
316 SST, metal seated, balanced, double seated. Three material combination choices.
Capacities:
Up to 100 Cv.
Painting:
Standard: All non-corrosion resistant portions to be painted with corrosion resistant epoxy paint per Cashco Spec #S-1606. Alternate: See Opt-95 or -95OS.
NOTE: Refer to “OPTION SPECIFICATIONS” for alternative designs, and to the “TECHNICAL SPECIFICATIONS” tables for a more complete description of the above specifications.
Model 8310HP
OPTION SPECIFICATIONS This section indicates special variations which are available to the standard Model 8310 products. Multiple options may be selected; i.e. 8310HP -3+15, which is the standard 8310HP product plus Opt. -3 and Opt. -15 together. Care must be exhibited to not develop conflicting combinations; i.e. 8310HP-3+20.
Option -1:
2
CLOSING CAP. Use to prevent tampering with the set point pressure. Available on all spring chamber materials. Consists of a ductile iron closing cap, a sealing gasket, a sealing lock nut on the adjusting screw, and a 1/4" NPT female tapped spring chamber vent hole.
Option -1+6 DIFFERENTIAL CONSTRUCTION – And Option -1+8: SINGLE DIAPHRAGM, AND DIFFERENTIAL CONSTRUCTION – DOUBLE DIAPHRAGM. Refer to Technical Bulletin 8310-DIFF-TB for 8310HP’s utilized in differential pressure service.
8310-BASIC-TB
Option -3:
T-BAR AND LOCKING LEVER. All sizes. Utilized for frequent setpoint changes to range spring.
Option -15:
STELLITED SEATS. Stellited seating surfaces on metal seating portions of plug and on both seat rings. See Table 3 for maximum allowable pressure drops.
Option -20:
AIR PRESSURE LOADED. No range spring. Incorporates a cast iron or cast steel loading chamber. Use when the outlet pressure is frequently changed. This construction offers the regulators maximum capacity with minimum proportional band "droop" when compared to standard units with a range spring. See Table 1 for capacities. For 10 – 100 psig (.7 – 6.9 Barg) control pressures. ONLY AVAILABLE ON 8310HP VARIATION; NOT AVAILABLE ON 8310LP. Pressures vary in a nearly 1:1 ratio; i.e. 50 psig (3.4 Barg) loading pressure gives nearly a 50 psig (3.4 Barg) outlet pressure.
Option -56:
SPECIAL CLEANING. Cleaned per Cashco Specification #S-1542. Utilize when cleanliness level better than normal is required. NOT FOR OXYGEN SERVICE.
Option -80:
HIGH OUTLET PRESSURE CONSTRUCTION. Utilized for 130 – 200 psig (9.0 – 13.8 Barg) outlet pressure spring range. ONLY AVAILABLE WITH HP VARIATION. Special construction includes a diaphragm ring to reduce effective diaphragm area and serve as a travel stop in case of over-pressurization.
Option -95:
EPOXY PAINT. Special epoxy painting of all non-corrosion resistant external surfaces per Cashco Spec #S-1547. Utilized in harsh atmospheric conditions.
Option -95OS:
EPOXY PAINT. Special epoxy painting of all non-corrosion resistant external surfaces per Cashco Spec #S-1687 for OFFSHORE installations.
TABLE 1 8310HP-20 AIR PRESSURE LOADED Cv’s FOR COMPOSITION & METAL DIAPHRAGMS Valve Size in
(DN)
Comp. Diaph. Cv
Metal Diaph. Cv
1-1/2" 2" 2-1/2" 3" 4"
(40) (50) (65) (80) (100)
26 40 55 78 100
25 35 44 54 74
Option -30:
INTEGRAL FLANGED END CONNECTIONS. Available with 125# FF and 250# RF flanges for cast iron body material or with 150# RF or 300# RF flanges for cast steel body material.
Option -34:
SPECIAL 14" FACE TO FACE DIMENSION FOR FLANGED END CONNECTIONS. CS body material, sizes 1-1/2" & 2" with 150# or 300# RF flanges only. See Opt.-30 for standard face to face dimension.
8310-BASIC-TB
3
TECHNICAL SPECIFICATIONS TABLE 2 DESIGN PRESSURE-TEMPERATURE MATERIAL LIMITS Lower temperature limits will always measure -20 °F (-29 °C) MATERIAL SPECIFICATIONS DESCRIPTION ABBREV. (BODY/SP.CH.)
ASTM NO.
TEMPERATURE LIMITS OF TRIMS °F (°C)
INLET END CONN.
PRESSURE
OUTLET PRESSURE
METAL DIAPHRAGM S1 TRIM
TEMPERATURE
psig
(Barg)
°F
(°C)
200
(13.8)
150
190
(13.1)
200
(94)
175
(12.1)
250
(121)
165
(11.4)
300
(149)
140
(9.7)
400
(205)
psig
COMPOSITION DIAPHRAGM S5 TRIM
S40 TRIM
(Barg)
°F
(°C)
°F
(°C)
°F
(°C)
30
(2.1)
450
(232)
300
(149)
180
(83)
30
(2.1)
450
(232)
300
(149)
180
(83)
150
(66)
180
(83)
MODEL 8310LP
Cast Iron (CI/CI)
A126 Class B
125# Flgd.
250# Flgd. or NPT Cast Carbon Steel (CS/CS)
A216 Grade WCB
150# Flgd. 300# Flgd. or NPT
(66)
125
(8.6)
450
(232)
200
(13.8)
450
(232)
200
(13.8)
400
(205)
185
(12.8)
450
(232)
200
(13.8)
450
(232) MODEL 8310HP
125# Flgd.
Cast Iron/ Ductile Iron (CI/DI)
A126 Class B /A395, GR. 60-40-18
250# Flgd.
NPT
Cast Carbon Steel (CS/CS)
A216 Grade WCB
150# Flgd.
300# Flgd. or NPT
200
(13.8)
150
(66)
200
(13.8)
150
(66)
150
(66)
190
(13.1)
200
(94)
190
(13.1)
200
(94)
200
(94)
175
(12.1)
250
(121)
175
(12.1)
250
(121)
250
(121)
165
(11.4)
300
(149)
165
(11.4)
300
(149)
300
(149)
140
(9.7)
400
(204)
140
(9.7)
400
(205)
125
(8.6)
450
(232)
125
(8.6) & Lower
450
(232)
300
(149)
375
(25.9)
300
(149)
335
(23.1)
350
(177)
290
(20.0)
400
(205)
200
(13.8) & Lower
450
(232)
300
(149)
180
(83)
250
(17.2)
450
(232)
400
(27.6)
150
(66)
400
(27.6)
200
(94)
400
(27.6)
250
(121)
375
(25.9)
300
(149)
200
450
(232)
300
(149)
180
(83)
335
(23.1)
350
(177)
(13.8) & Lower
290
(20.0)
400
(205)
250
(17.2)
450
(232)
285
(19.7)
100
(38)
260
(17.9)
200
(94)
230
(15.9)
300
(149)
200
(13.8) & Lower
400
(205)
200
(13.8)
400
(205)
300
(149)
180
(83)
185
(12.8)
450
(232)
185
(12.8) & Lower
450
(232)
650
(44.8)
300
(149)
635
(43.8)
400
(205)
200
450
(232)
300
(149)
180
(83)
615
(41.4)
450
(232)
(13.8) & Lower
NOTE: See Table 7 for allowable over pressure limits.
4
8310-BASIC-TB
TABLE 3 MAXIMUM ALLOWABLE PRESSURE DROPS
Fluid
NonCavitating Liquid Cavitating Liquids Gas
Steam
Max. Recommended Operating Pressure Drop Model 8310LP Model 8310HP Clean Fluid Unclean Fluid All Fluid Qualities Industrial Quality Pipeline Quality psid (Bard) psid (Bard) psid (Bard) 150 (10.3) 200 (13.8) 100 (6.9) 150
(10.3)
Consult Factory
300
(20.7)
150
Consult Factory
(10.3) N/R
200
(13.8)
450
(31.0)
150
(10.3)
200
(13.8)
450
(31.0)
300
(20.7)
150
(10.3)
150
(10.3)
200
(13.8)
300
(20.7)
N/R 150
(10.3)
Option Number
None Stellited Opt-15 Stellited Opt-15 None Stellited Opt-15 None Stellited Opt-15
Trim Designation Number
All S1 Only All
S1 Only
N/R: Not Recommended
TABLE 4 APPLICATIONS Fluid
Recommended Construction
Air or Industrial Gases
Metal Seat & Composition Diaphragm Metal Seat & Diaphragm Metal Seat & Composition Diaphragm Metal Seat & Diaphragm Metal Seat & Composition Diaphragm Metal Seat & Diaphragm Metal Seat & Composition Diaphragm Metal Seat & Diaphragm
Trim Designation Number S40 S1 S5, S40 S1 S5, S40 S1 S40 S1
Metal Seat & Diaphragm
S1
Chemicals Hydrocarbon Gas or Liquids ‡ Water and Condensate Steam – Saturated or Superheated
‡ In accordance with ASME B31.3 “process piping”, do not use Cast Iron Body for hydrocarbon or flammable fluid service with inlet pressures greater than 150 Psig (10.3 Barg) or temperatures greater than 300° F (149° C).
8310-BASIC-TB
5
TABLE 5 STAINLESS STEEL TRIM MATERIAL COMBINATIONS SST Trim Designation Number Metal Diaphragm Composition Diaphragm S1 S5 S40 302 SST Fluorocarbon Elastomer Neoprene 316 SST 316 SST 316 SST 316 SST 316 SST 316 SST 316 SST 316 SST 316 SST 18-8 SST 18-8 SST 18-8 SST Hardened 440C SST Hardened 440C SST Hardened 440C SST ** ** ** 303 SST 303 SST 303 SST Steel Steel Steel TFE TFE TFE 303 SST 303 SST 303 SST Steel Steel Steel Steel Steel Steel Steel Steel Steel
Part Diaphragm Plug * Seat Rings Stem Groove Pin Stem Guides Bonnet Plug Pusher Plate Pusher Plate Nut Diaphragm Casing O-Ring Stem Bushing Bonnet Nut Needle Valve Pipe Nipple
“Plug Assembly” consists of factory-joined plug, stem and groove pin. Same as body material. NOTE: Cashco, Inc. does not recommend metal seated trim on any service where the flow will be dead ended down stream of the pressure reducing regulator. Use different Cashco model such as 1000HP/LP or DA1/DA3/DA4 composition seat for dead end service.
* **
TABLE 6 STEEL RANGE SPRINGS METAL OR COMPOSITION DIAPHRAGMS ALL SIZES
Construction
Standard Option -80
Figure 1 Opt.-20 Air Pressure Loaded
Range Spring “LP” Variation “HP” Variation 1–4 * (.07–.27) 10–40 (.69–2.8) 3–10 8–30
(.21–.69) 30–100 (2.1–6.9) (.55–2.1) 75–145 (5.2–10.0) N/A 130–200 (9.0–13.8) * Composition Diaphragm Only
N/A: Not Applicable
TABLE 7 OVER-PRESSURE LIMITS – SAFETY RELIEF VALVE SIZING & SETPOINT Range Spring Variation
LP
HP
psig
(Barg)
1–4
(.07-.27)
3-10
(.21-.69)
8-30
(.55-2.1)
10-40
(.69-2.8)
30-100 75-145 130–200
(2.1-6.9) (5.2-10.0) (9.0-13.8)
Diaphragm Material
* Emergency Over-Pressure (Rise over Setpoint)
Maximum Cv with Valve Plug Wide Open Body Size - in / (mm) 2" 2-1/2" 3" (DN50) (DN65) (DN80)
psig
(Barg)
1-1/2" (DN40)
4" (DN100)
All
20
(1.4)
27
40
55
76
100
All
35
(2.4)
27
40
55
76
100
All
45
(3.1)
* Exceeding the “Emergency Over-Pressure” level may cause mechanical damage to internal parts of the valve. 6
8310-BASIC-TB
LP VARIATION TABLE 8 8310LP CAPACITY TABLES – Cv – METAL DIAPHRAGM Set Point (Outlet) Pressure, P2 psig (Barg) 5 (.34) *10 (.69) 15 (1.0) 20 (1.4) 25 (1.7) 30 (2.1)
1-1/2" (DN40) Body Droop 10% 20% 30% 8.5 15.1 22.5 2.9 5.6 10.0 4.2 8.2 12.5 6.1 11.5 16.1 8.1 14.7 21.7 10.9 18.2 23.5
2" (DN50) Body Droop 10% 20% 30% 10.2 19.7 29.9 3.3 6.7 12.0 4.8 10.0 16.0 7.1 14.1 21.9 9.8 18.7 30.1 13.2 25.1 32.6
2-1/2" (DN65) Body Droop 10% 20% 30% 12.0 22.9 37.5 3.9 7.5 13.2 5.5 11.5 18.0 8.1 16.5 25.5 11.6 22.0 36.0 15.5 29.2 41.0
3" (DN80) Body Droop 10% 20% 30% 13.9 26.1 43.1 4.6 8.7 16.0 6.8 13.2 21.0 9.5 19.0 29.0 13.2 25.0 42.4 17.9 33.5 46.8
4" (DN100) Body Droop 10% 20% 30% 19.0 36.1 59.8 6.3 12.0 21.7 8.1 17.9 28.5 13.1 26.4 40.7 18.0 30.0 57.5 24.5 45.9 65.0
* Utilizes 8 - 30 psig (.55 - 2.1 Barg) range spring TABLE 9 8310LP CAPACITY TABLES – Cv – COMPOSITION DIAPHRAGM Set Point (Outlet) Pressure, P2 psig (Barg) 2 (.14) 5 (.34) *10 (.69) 15 (1.0) 20 (1.4) 25 (1.7) 30 (2.1)
*
1-1/2" (DN40) Body Droop 10% 20% 30% 16.8 25.7 26.2 14.0 23.6 26.2 5.5 10.8 15.5 7.5 14.0 20.0 10.0 17.8 23.7 13.3 22.3 26.2 17.5 25.8 26.2
2" (DN50) Body Droop 10% 20% 30% 22.0 35.9 39.3 18.0 32.9 38.0 6.3 13.0 20.0 8.9 18.0 37.3 12.2 23.8 33.1 16.9 31.2 37.2 23.5 36.5 39.3
2-1/2" (DN65) Body Droop 10% 20% 30% 25.3 46.2 52.8 21.1 41.2 50.0 7.8 15.3 22.7 10.5 21.2 32.3 13.8 27.8 41.9 19.7 37.8 48.3 27.2 47.3 53.6
3" (DN80) Body Droop 10% 20% 30% 29.0 58.4 73.2 24.0 47.7 67.0 8.8 27.4 26.4 12.2 24.2 36.8 16.2 32.2 48.8 22.5 43.7 53.7 31.7 61.3 75.0
4" (DN100) Body Droop 10% 20% 30% 40.5 81.2 99.0 33.1 66.5 94.4 12.2 23.9 36.5 16.9 33.2 50.7 22.2 44.3 67.9 31.2 60.3 90.5 43.3 86.1 99.8
Utilizes 8 - 30 psig (.55 - 2.1 Barg) range spring
HP VARIATION TABLE 10 8310HP CAPACITY TABLES – Cv – METAL DIAPHRAGM Set Point (Outlet) Pressure, P2 psig (Barg) 10 (.69) 15 (1.0) 25 (1.7) 35 (2.4) 50 (3.4) 75 (5.2) 100 (6.9) 140 (9.7) 150 (10.3) 200 (13.8)
1-1/2" (DN40) Body Droop 10% 20% 30% 2.0 4.2 7.5 3.0 8.0 12.0 7.5 14.0 19.0 11.5 19.7 25.2 6.2 11.7 16.7 8.5 15.5 21.0 8.7 18.0 21.2 10.8 18.5 24.0 11.4 19.5 25.0 14.0 23.5 26.0
2" (DN50) Body Droop 10% 20% 30% 2.6 6.3 9.0 4.0 9.2 14.5 8.7 18.0 26.5 14.0 27.5 35.7 7.3 14.8 22.0 10.0 20.3 29.0 10.5 21.0 29.5 12.5 25.0 33.5 13.8 27.1 35.5 18.7 33.4 38.5
2-1/2" (DN65) Body Droop 10% 20% 30% 3.0 6.8 10.5 5.0 11.2 16.5 10.0 21.0 31.3 16.5 32.3 45.7 8.0 16.8 25.2 11.2 23.5 35.0 12.0 23.8 36.0 15.0 28.8 43.0 16.2 31.9 45.0 21.2 41.3 50.2
3" (DN80) Body Droop 10% 20% 30% 4.0 7.5 12.0 6.0 12.5 19.0 11.7 23.7 36.5 18.7 37.2 55.7 9.5 19.0 28.7 13.0 27.0 40.5 13.7 27.2 41.3 17.0 32.5 51.3 18.5 36.3 55.5 24.4 48.5 67.5
4" (DN100) Body Droop 10% 20% 30% 5.0 11.0 16.7 8.5 17.5 23.5 18.5 32.5 48.0 26.5 51.5 78.7 13.0 26.8 39.5 18.0 36.5 55.7 18.7 37.5 56.5 23.5 44.7 71.0 25.0 50.7 76.5 33.7 67.5 95.0
TABLE 11 8310HP CAPACITY TABLES – Cv – COMPOSITION DIAPHRAGM Set Point (Outlet) Pressure, P2 psig (Barg) 10 (.69) 15 (1.0) 25 (1.7) 35 (2.4) 50 (3.4) 75 (5.2) 100 (6.9) 140 (9.7) 150 (10.3) 200 (13.8)
1-1/2" (DN40) Body Droop 10% 20% 30% 6.0 11.2 16.2 7.5 13.8 19.5 10.5 19.0 25.0 16.0 25.4 26.2 10.5 18.7 24.5 15.2 24.7 26.2 12.1 21.3 26.0 16.5 26.0 26.0 17.8 26.2 26.2 21.2 26.2 26.2
2" (DN50) Body Droop 10% 20% 30% 7.0 14.0 21.5 9.1 18.7 27.2 13.0 26.3 34.8 21.4 35.7 39.0 13.0 26.1 34.2 20.2 34.7 38.7 15.7 29.4 36.9 22.4 38.0 37.0 24.4 37.0 39.3 29.1 38.8 39.5
2-1/2" (DN65) Body Droop 10% 20% 30% 8.0 16.2 24.8 11.2 21.2 32.1 15.0 31.0 44.3 24.5 45.7 52.4 15.0 30.0 43.7 22.9 43.7 51.2 17.7 36.0 47.5 26.0 50.0 52.5 28.0 37.9 53.8 35.1 51.5 55.0
3" (DN80) Body Droop 10% 20% 30% 9.2 18.7 28.7 12.5 24.1 36.5 17.6 35.5 53.5 28.1 56.5 72.2 17.4 34.8 52.1 26.5 52.8 70.0 20.4 41.2 61.3 30.0 67.0 72.0 32.4 62.5 75.2 40.2 70.8 78.0
4" DN100) Body Droop 10% 20% 30% 13.0 26.2 39.1 17.0 33.5 50.8 24.0 48.8 73.7 38.8 78.7 98.2 24.0 47.5 72.2 36.7 72.8 97.5 28.0 57.0 86.0 41.5 95.0 97.0 44.2 88.5 100.0 55.1 97.5 100.0
METRIC CONVERSION FACTORS: Cv ÷ 1.16 = kv
8310-BASIC-TB
7
TABLE 12 MODEL 8310 – “HP VARIATION” WATER CAPACITY – GPM S.G. = 1.0 T = 60°F FL = 0.88 ALL Sizes – Set Point Pressure - P2 psig 10
15
25
35
50
75
100
140
150
200
Inlet Pressure
(Barg) psig 50 (.69) 75 100 50 75 (1.0) 100 125 50 75 100 (1.7) 125 150 175 50 75 100 125 (2.4) 150 175 200 250 75 100 125 150 (3.4) 175 200 250 300 100 125 150 (5.2) 175 200 250 300 125 150 175 (6.9) 200 250 300 150 175 (9.7) 200 250 300 175 200 (10.3) 250 300 250 (13.8) 300
(Barg) (3.4) (5.2) (6.9) (3.4) (5.2) (6.9) (8.6) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (10.3) (12.1) (13.8) (17.2) (20.7) (12.1) (13.8) (17.2) (20.7) (17.2) (20.7)
Composition Diaphragm Only
1-1/2" (DN40) Body
2" (DN50) Body
2-1/2" (DN65) Body
3" (DN80) Body
Droop
Droop
Droop
Droop
10% 37.9 48.4 CAV 44.4 58.1 69.1 CAV 52.5 74.2 90.9 105.0 117.4 CAV 62.0 101.2 129.0 151.8 HI VEL HI VEL HI VEL CAV 52.5 74.2 90.9 105.0 117.4 128.6 148.5 CAV 76.0 107.5 131.6 152.0 HI VEL HI VEL HI VEL 60.5 85.6 104.8 121.0 148.2 HI VEL 52.2 97.6 127.8 HI VEL HI VEL 89.0 125.9 HI VEL HI VEL 149.9 HI VEL
20% 70.8 90.3 CAV 81.6 106.9 127.2 CAV 95.0 134.4 HI VEL HI VEL HI VEL CAV 98.4 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL CAV 93.5 132.2 HI VEL HI VEL HI VEL HI VEL HI VEL CAV 123.5 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 106.5 150.6 HI VEL HI VEL HI VEL HI VEL 82.2 153.8 HI VEL HI VEL HI VEL 131.0 HI VEL HI VEL HI VEL HI VEL HI VEL
30% 102.5 130.6 CAV 115.4 151.0 HI VEL CAV 125.0 HI VEL HI VEL HI VEL HI VEL CAV 101.5 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL CAV 122.5 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL CAV 131.0 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 130.0 HI VEL HI VEL HI VEL HI VEL HI VEL 82.2 153.8 HI VEL HI VEL HI VEL 131.0 HI VEL HI VEL HI VEL HI VEL HI VEL
10% 44.3 56.4 CAV 53.8 70.5 83.9 CAV 65.0 91.9 112.6 130.0 145.3 CAV 82.9 135.3 172.5 203.0 229.5 253.2 274.9 CAV 65.0 91.9 112.6 130.0 145.3 159.2 183.8 CAV 101.0 142.8 174.9 202.0 225.8 267.2 HI VEL 78.5 111.0 136.0 157.0 192.3 222.0 70.8 132.5 173.5 234.9 HI VEL 122.0 172.5 244.0 HI VEL 205.8 HI VEL
20% 88.5 112.9 CAV 110.6 144.8 172.4 CAV 131.5 186.0 227.8 263.0 HI VEL CAV 138.3 225.8 HI VEL HI VEL HI VEL HI VEL HI VEL CAV 130.5 184.6 226.0 261.0 HI VEL HI VEL HI VEL CAV 173.5 245.4 HI VEL HI VEL HI VEL HI VEL HI VEL 147.0 207.9 254.6 HI VEL HI VEL HI VEL 120.2 224.8 HI VEL HI VEL HI VEL 185.0 261.6 HI VEL HI VEL 274.4 HI VEL
30% 136 173.3 CAV 160.9 210.7 250.8 CAV 174.0 246.1 HI VEL HI VEL HI VEL CAV 151.0 246.7 HI VEL HI VEL HI VEL HI VEL HI VEL CAV 171.0 241.8 HI VEL HI VEL HI VEL HI VEL HI VEL CAV 193.5 273.7 HI VEL HI VEL HI VEL HI VEL HI VEL 184.5 260.9 HI VEL HI VEL HI VEL HI VEL 117.0 218.9 HI VEL HI VEL HI VEL 196.5 277.9 HI VEL HI VEL 279.3 HI VEL
10% 50.6 64.5 CAV 66.3 86.8 103.3 CAV 75.0 106.1 129.9 150.0 167.7 CAV 94.9 155.0 197.5 232.4 262.7 289.9 314.7 CAV 75.0 106.1 129.9 150.0 167.7 183.7 212.1 CAV 114.5 161.9 198.3 229.0 256.0 302.9 343.5 88.5 125.2 153.3 177.0 216.8 250.3 82.2 153.8 201.4 272.7 328.9 140.0 198.0 280.0 342.9 248.2 351.0
20% 102.5 130.6 CAV 125.4 164.2 195.5 CAV 155.0 219.2 268.5 310.0 346.6 CAV 177.0 289.0 368.4 HI VEL HI VEL HI VEL HI VEL CAV 150.0 212.1 259.8 300.0 335.4 367.4 424.3 CAV 218.5 309.0 378.5 HI VEL HI VEL HI VEL HI VEL 180.0 254.6 311.8 360.0 HI VEL HI VEL 158.1 295.8 387.3 HI VEL HI VEL 189.5 268.0 379.0 HI VEL 364.2 HI VEL
30% 156.8 199.9 CAV 189.9 248.6 295.9 CAV 221.5 313.2 383.6 HI VEL HI VEL CAV 202.9 331.4 422.5 HI VEL HI VEL HI VEL HI VEL CAV 218.5 309.0 378.5 HI VEL HI VEL HI VEL HI VEL CAV 256.0 362.0 HI VEL HI VEL HI VEL HI VEL HI VEL 237.5 335.9 411.4 HI VEL HI VEL HI VEL 166.0 310.6 406.7 HI VEL HI VEL 269.0 380.4 HI VEL HI VEL 388.9 HI VEL
10% 58.2 74.2 CAV 74.0 96.8 115.2 CAV 88.0 124.5 152.4 176.0 196.8 CAV 108.8 177.7 226.5 266.6 301.3 332.5 361.0 CAV 87.0 123.0 150.7 174.0 194.5 213.1 246.1 CAV 132.5 187.4 229.5 265.0 296.3 350.6 397.5 102.0 144.2 176.7 204.0 249.8 288.5 94.9 177.5 232.4 314.6 379.5 162.0 229.1 324.0 396.8 284.3 402.0
20% 118.3 150.8 CAV 142.6 186.7 222.2 CAV 177.5 251.0 307.4 355.0 396.9 CAV 218.8 357.3 455.5 536.0 605.9 668.5 HI VEL CAV 174.0 246.1 301.4 348.0 389.1 426.2 492.1 CAV 264.0 373.4 457.3 528.0 590.3 698.5 HI VEL 206.0 291.3 356.8 412.0 504.6 582.7 211.9 396.4 519.0 702.7 HI VEL 312.5 441.9 625.0 HI VEL 500.6 708.0
4" (DN100) Body Droop
30% 181.5 231.4 CAV 215.9 282.7 336.5 CAV 267.5 378.3 463.3 535.0 598.1 CAV 279.6 456.6 582.1 684.9 HI VEL HI VEL HI VEL CAV 260.5 368.4 451.2 521.0 582.5 638.1 HI VEL CAV 350.0 495.0 606.2 700.0 HI VEL HI VEL HI VEL 306.5 433.5 530.9 613.0 HI VEL HI VEL 227.7 426.0 557.7 HI VEL HI VEL 376.0 531.7 HI VEL HI VEL 551.5 HI VEL
10% 20% 30% 82.2 165.7 247.3 104.8 211.2 315.2 CAV CAV CAV 100.6 198.2 300.5 131.7 259.5 393.5 156.7 308.9 468.4 CAV CAV CAV 120.0 244.0 368.5 169.7 345.1 521.1 207.8 422.6 638.3 240.0 488.0 737.0 268.3 545.6 824.0 CAV CAV CAV 150.3 304.8 380.3 245.4 497.7 621.1 312.8 634.5 791.7 368.1 746.6 931.6 416.1 844.0 1053.1 459.1 931.2 1161.9 498.4 1010.9 1261.4 CAV CAV CAV 120.0 237.5 361.0 169.7 335.9 510.5 207.8 411.4 625.3 240.0 475.0 722.0 268.3 531.1 807.2 293.9 581.8 884.3 339.4 671.8 1021.1 CAV CAV CAV 183.5 364.0 487.5 259.5 514.8 689.4 317.8 630.5 844.4 367.0 728.0 975.0 410.3 813.9 1090.1 485.5 963.1 1289.8 550.5 1092 HI VEL 140.0 285.0 430.0 198.0 403.1 608.1 242.5 493.6 744.8 280.0 570.0 860.0 342.9 698.1 1053.3 396.0 806.1 1216.2 131.2 300.4 306.7 245.5 562.0 573.9 321.5 735.9 751.4 435.3 996.4 1017.3 524.9 1201.7 1227.0 221.0 442.5 500.0 312.5 625.8 707.1 442.0 885.0 1000 541.3 1083.9 1224.7 389.6 689.4 707.1 551.0 975.0 1000
NOTE: Where “CAV” is indicated within the above capacity tables, the water has reached full cavitation, and flow is choked. Where “HI VEL” is indicated, the flow has reached or exceeded the velocities to the right based on Schedule 40 pipe. METRIC CONVERSION FACTOR: GPM x 3.785 = LPM in 1-1/2" 2" 2-1/2" 3" 4"
8
SIZE (DN) (40) (50) (65) (80) (100)
MAX. VEL 25 fps 27 fps 29 fps 31 fps 35 fps
8310-BASIC-TB
TABLE 13 MODEL 8310 – “HP VARIATION” AIR CAPACITY – SCFH S.G. = 1.0 T = 60°F FL = 0.88 ALL Sizes – Composition Diaphragm Only Set Point Pressure - P2 psig
(Barg)
10
(.69)
15
(1.0)
25
(1.7)
35
(2.4)
50
(3.4)
75
(5.2)
100
(6.9)
14
(9.7)
150
(10.3)
200
(13.8)
Inlet Pressure psig 50 75 100 125 150 175 200 250 300 50 75 100 125 150 175 200 250 300 50 75 100 125 150 175 200 250 300 50 75 100 125 150 175 200 250 300 75 100 125 150 175 200 250 300 100 125 150 175 200 250 300 125 150 175 200 250 300 150 175 200 250 300 175 200 250 300 250 300
(Barg) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (10.3) (12.1) (13.8) (17.2) (20.7) (12.1) (13.8) (17.2) (20.7) (17.2) (20.7)
1-1/2" (DN40) Body 10% 12400 17300 22100 26900 31700 36500 41300 50900 60600 15600 21600 27600 33600 39600 45600 51600 63700 75700 21300 30200 38600 47000 55500 63900 72300 89100 106000 28600 45400 58900 71700 84500 97300 110200 135800 161500 26900 37800 46900 55500 63900 72300 89100 106000 45300 63700 78500 91900 104600 129000 153400 40500 56900 69900 81500 102500 122100 40400 74900 97900 133800 164400 70500 99400 141300 175700 134300 190500
Droop 20% 23200 32200 41200 50200 59200 68100 77100 95100 SONIC 28600 39700 50800 61800 72900 83900 95000 SONIC SONIC 38600 54700 69900 85100 100300 115600 130800 SONIC SONIC 45400 72100 93400 113800 134200 154500 174900 SONIC SONIC 47900 67300 83600 98800 113800 128700 158700 188700 73700 103500 127600 149400 170000 209700 249300 71200 100200 123100 143400 180400 215000 63700 118100 154300 210900 259000 103800 146300 208000 258600 166000 235400
30% 33600 46600 59600 72600 85600 SONIC SONIC SONIC SONIC 40500 56100 71700 87400 103000 SONIC SONIC SONIC SONIC 50700 71900 92000 112000 132000 152100 SONIC SONIC SONIC 46900 74400 96400 117400 138400 159400 180400 SONIC SONIC 62700 88100 109500 129400 149000 168700 208000 247200 78100 109800 135400 158500 180300 222400 264400 86900 122300 150300 175100 220200 262400 63700 118100 154300 210900 259000 103800 146300 208000 258600 166000 235400
2" (DN50) Body 10% 14500 20100 25700 31400 37000 42600 48200 59400 70600 18900 26200 33500 40800 48100 55400 62700 77200 91800 26400 37400 47800 58200 68700 79100 89500 110300 131200 38300 60800 78700 95900 113000 130200 147300 181700 216000 33300 46800 58100 68700 79100 89500 110300 131200 60200 84600 104400 122200 139000 171500 203900 52500 73800 90700 105700 133000 158400 54900 101700 132900 181700 223100 96700 136200 193700 240900 184400 261500
Droop 20% 29000 40300 51500 62700 73900 85200 96400 118800 141300 38800 53800 68800 83800 98800 113800 128700 158700 188700 53400 75700 96700 117800 138900 160000 181100 223200 SONIC 63900 101400 131300 159900 188600 217200 245800 303000 SONIC 66800 93900 116700 137800 158800 179700 221500 263400 103500 145400 179300 209900 238800 294500 350200 98300 138300 169900 198000 249000 296700 93100 172600 225500 308200 378500 146600 206500 293700 365200 245900 348600
30% 44600 61800 79100 96300 113600 130800 148000 SONIC SONIC 56400 78200 100000 121900 143700 165500 187300 SONIC SONIC 70600 100100 128000 155900 183800 211700 239600 SONIC SONIC 69800 110700 143400 174700 206000 237200 268500 SONIC SONIC 87600 123000 152900 180600 208000 235500 290300 345100 115400 162100 199900 234100 266300 328500 390500 123400 173500 213300 248500 312500 372400 90600 168000 219600 300100 368500 155800 219400 312000 387900 250300 354900
2-1/2" (DN65) Body 10% 16600 23000 29400 35800 42300 48700 55100 67900 80700 23200 32200 41200 50200 59200 68100 77100 95100 113000 30400 43100 55200 67200 79200 91200 103300 127300 151400 43800 69600 90100 109800 129400 149000 168700 208000 247200 38400 54000 67000 79200 91200 103300 127300 151400 68300 95900 118300 138500 157600 194400 231100 59200 83200 102300 119200 149900 178600 63700 118100 154300 210900 259000 111000 156300 222300 276400 222400 315400
Droop 20% 33600 46600 59600 72600 85600 98500 111500 137500 163500 44000 61000 78000 95000 112000 129000 146000 180000 213900 62900 89200 114000 138900 163700 188600 213400 263100 312800 81700 129700 168100 204700 241400 278000 314600 387900 SONIC 76800 107900 134100 158400 182500 206500 254700 302800 130300 183100 225800 264300 300700 370900 441000 120400 169300 208100 242400 304900 363300 122500 227100 296800 405500 498000 150200 211600 300800 374100 326300 462700
30% 51500 71300 91200 111100 131000 150900 170700 210500 SONIC 66600 92300 118100 143800 169500 195300 221000 SONIC SONIC 89900 127400 162900 198500 234000 269500 305000 SONIC SONIC 93700 148800 192700 234700 276800 318800 360800 444800 SONIC 111900 157200 195300 230800 265800 300900 370900 441000 152700 214500 264500 309700 352300 434600 516700 158800 223400 274500 319900 402300 479400 128600 238400 311600 425800 522900 213200 300300 427100 531100 348500 494200
3" (DN80) Body 10% 19100 26500 33800 41200 48600 56000 63300 78100 92800 25900 36000 46000 56000 66000 76000 86100 106100 126100 35700 50600 64700 78800 93000 107100 121200 149400 177600 50300 79800 103400 125900 148400 170900 193500 238500 283600 44600 62600 77800 91900 105800 119800 147700 175600 79000 111000 136900 160300 182300 224900 267400 68200 95900 117900 137400 172800 205900 73500 136200 178100 243300 298800 128400 180900 257200 319800 254700 361200
Droop 20% 38800 53800 68800 83800 98800 113800 128700 158700 188700 50000 69300 88600 108000 127300 146600 165900 204600 243200 72000 102100 130600 159000 187500 216000 244400 301300 358300 101100 160400 207800 253100 298400 343700 389000 479600 570200 89100 125200 155500 183800 211700 239600 295400 351200 157500 221200 272800 319300 363300 448200 532800 137800 193700 238100 277500 348900 415800 164100 304300 397700 543400 667400 247700 348900 496100 616900 448600 636200
30% 59500 82600 105600 128600 151600 174600 197600 243600 289600 75700 105000 134300 163500 192800 222000 251300 309800 368300 108600 153900 196800 239700 282600 325500 368300 454100 539900 129100 205000 265600 323400 381300 439200 497100 612900 SONIC 133400 187400 232900 275200 316900 358700 442200 525800 208800 293300 361600 423400 481700 594200 706400 205000 288300 354300 412800 519100 618600 176400 327000 427300 584000 717200 298000 419800 596900 742300 494200 700800
4" (DN100) Body 10% 27000 37400 47800 58200 68700 79100 89500 110300 131200 35300 48900 62500 76200 89800 103400 117000 144300 171600 48700 69000 88300 107500 126800 146000 165200 203700 242200 69400 110200 142700 173800 204900 236000 267100 329300 391600 61500 86300 107300 126800 146000 165200 203700 242200 109400 153700 189600 222000 252500 311500 370400 93600 131700 161800 188600 237100 282600 101700 188500 246300 336600 413400 175200 246700 350900 436300 349100 495100
Droop 20% 54400 75400 96400 117400 138400 159400 180400 222400 264400 69500 96400 123200 150100 176900 203800 230600 284400 338100 99000 140400 179500 218600 257700 296900 336000 414200 492500 140800 223400 289500 352600 415700 478800 541800 668000 794200 121700 170900 212300 250900 289000 327000 403200 479400 217100 305000 376100 440300 500900 618000 734700 190600 268000 329500 383900 482700 575200 232700 431400 563800 770500 946300 350700 494000 702500 873600 617800 876100
30% 81100 112500 143800 175200 206500 237900 269200 331900 394600 105400 146100 186900 227600 268300 309000 349800 431200 512700 149600 212000 271100 330200 389300 448300 507400 625600 743800 175600 278800 361200 439900 518600 597400 676100 833600 991000 184900 259800 322700 381300 439200 497100 612900 728600 290800 408500 503700 589700 670900 827600 983900 287600 404400 497100 579200 728300 867900 237600 440500 575700 786700 966200 396300 558200 793800 987100 633600 898500
NOTE: Where “SONIC” is indicated within the above capacity tables, outlet velocity with Schedule 40 pipe has reached sonic velocity of 1118 fps. Additional flow cannot be obtained, and pipeline velocity is in excess of customary pipe velocity design limits. Flow will be approximately the last indicated value in the column above “SONIC”. METRIC CONVERSION FACTORS: SCFH ÷ 35.31 = Sm3/HR SCFH ÷ 37.32 = Nm3/HR
8310-BASIC-TB
9
TABLE 14 MODEL 8310 – “HP VARIATION” STEAM CAPACITY – LBS/HR S.G. = Actual T = Saturated FL = 0.88 ALL Sizes – Set Point Pressure - P2 psig
(Barg)
10
(.69)
15
(1.0)
25
(1.7)
35
(2.4)
50
(3.4)
75
(5.2)
100
(6.9)
140
(9.7)
150
(10.3)
200
(13.8)
Inlet Pressure psig 25 50 75 100 125 150 175 200 250 300 25 50 75 100 125 150 175 200 250 300 50 75 100 125 150 175 200 250 300 50 75 100 125 150 175 200 250 300 75 100 125 150 175 200 250 300 100 125 150 175 200 250 300 125 150 175 200 250 300 150 175 200 250 300 175 200 250 300 250 300
(Barg) (1.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (1.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (10.3) (12.1) (13.8) (17.2) (20.7) (12.1) (13.8) (17.2) (20.7) (17.2) (20.7)
1-1/2" (Dn40) Body Droop 10% 120 207 290 368 446 524 602 679 827 991 160 307 435 552 669 786 902 1019 1241 1486 726 1055 1380 1673 1965 2256 2547 HI VEL HI VEL 955 1574 2057 2565 3012 3459 HI VEL HI VEL HI VEL 752 1073 1339 1582 1865 2106 2564 3071 1203 1706 2111 2471 2809 3516 4210 1385 1958 2412 2811 3497 4284 1260 2346 3072 4162 5151 2160 3049 4300 5391 4220 6040
20% 252 435 609 773 937 1100 1263 1426 1737 HI VEL 426 818 1159 1472 1784 2096 HI VEL HI VEL HI VEL HI VEL 1355 1970 2577 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 1635 2696 3524 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 1419 2025 2527 2985 3519 3974 4839 HI VEL 2194 3111 3849 4507 5122 6411 HI VEL 2865 4052 4991 5816 7236 HI VEL 2158 4018 5262 7129 8824 3694 5215 7356 9222 7083 10138
Metal Diaphragm
2" (DN50) Body Droop
30% 10% 450 156 776 269 1087 377 1380 479 1673 580 HI VEL 681 HI VEL 782 HI VEL 883 HI VEL 1075 HI VEL 1288 639 213 1228 409 1739 580 2209 736 HI VEL 892 HI VEL 1048 HI VEL 1203 HI VEL 1358 HI VEL 1654 HI VEL 1981 1840 842 2673 1224 HI VEL 1601 HI VEL 1940 HI VEL 2279 HI VEL 2617 HI VEL 2955 HI VEL 3598 HI VEL 4309 2092 1162 3449 1916 HI VEL 2504 HI VEL 3123 HI VEL 3667 HI VEL 4211 HI VEL 4755 HI VEL 5790 HI VEL HI VEL 2025 885 2891 1264 3607 1577 4260 1862 HI VEL 2196 HI VEL 2479 HI VEL 3019 HI VEL 3616 2972 1415 4215 2007 5214 2483 6106 2908 HI VEL 3305 HI VEL 4136 HI VEL 4953 3374 1671 4772 2364 5878 2911 6850 3393 HI VEL 4221 HI VEL 5170 2800 1458 5213 2715 6826 3555 9249 4817 HI VEL 5962 4736 2614 6686 3691 9431 5206 11823 6526 7836 5636 11217 8068
20% 378 652 913 1160 1405 1650 1895 2140 2606 3120 490 941 1333 1693 2052 2410 2767 3125 HI VEL HI VEL 1743 2533 3313 4015 4715 HI VEL HI VEL HI VEL HI VEL 2283 3764 4919 6134 HI VEL HI VEL HI VEL HI VEL HI VEL 1795 2562 3196 3775 4452 5026 6121 7331 2873 4074 5041 5903 6708 8396 10055 3342 4727 5822 6786 8441 10340 2917 5430 7111 9634 11924 5134 7248 10223 12816 10067 14410
30% 540 932 1304 1656 2007 2358 2707 3057 HI VEL HI VEL 772 1483 2101 2669 3234 HI VEL HI VEL HI VEL HI VEL HI VEL 2566 3729 4877 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 2964 4886 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 2668 3808 4751 5612 6617 7472 HI VEL HI VEL 4104 5820 7201 8432 9583 HI VEL HI VEL 4695 6640 8179 9532 11858 HI VEL 3908 7276 9528 12909 15979 6725 9494 13392 16789 11604 16610
2-1/2" (DN65) Body Droop 10% 180 311 435 552 669 786 902 1019 1241 1486 266 512 725 920 1115 1310 1504 1698 2068 2477 968 1407 1840 2230 2619 3008 3396 4136 4953 1370 2258 2951 3680 4322 4963 5604 6824 8173 970 1385 1728 2041 2406 2717 3309 3963 1585 2248 2781 3257 3701 4632 5548 1910 2701 3327 3877 4824 5909 1750 3258 4266 5780 7155 3069 4333 6111 7661 6390 9146
20% 408 704 985 1252 1517 1781 2045 2309 2812 3368 596 1146 1623 2061 2498 2934 3369 3804 4632 HI VEL 2033 2955 3865 4684 5501 6317 7132 HI VEL HI VEL 2681 4421 5778 7204 8461 HI VEL HI VEL HI VEL HI VEL 2037 2908 3628 4286 5053 5706 6948 8321 3326 4717 5835 6833 7766 9720 11640 3788 5357 6599 7690 9567 11719 3360 6256 8192 11098 13737 6043 8531 12034 15086 12448 17818
3" (DN80) Body Droop
30% 10% 630 240 1087 414 1522 580 1933 736 2342 892 2750 1048 3158 1203 3566 1358 4343 1654 HI VEL 1981 878 319 1688 614 2391 869 3037 1104 3680 1338 4322 1572 4963 1805 HI VEL 2038 HI VEL 2482 HI VEL 2972 3030 1133 4404 1646 5761 2153 6981 2610 HI VEL 3065 HI VEL 3519 HI VEL 3974 HI VEL 4839 HI VEL 5795 3794 1552 6255 2559 8175 3345 HI VEL 4171 HI VEL 4898 HI VEL 5625 HI VEL 6351 HI VEL 7734 HI VEL 9262 3056 1152 4362 1645 5442 2052 6428 2423 7580 2857 8558 3226 10423 3929 HI VEL 4705 4953 1840 7025 2609 8691 3228 10177 3780 11566 4296 14476 5377 HI VEL 6439 5730 2180 8104 3084 9981 3798 11632 4427 14471 5507 17726 6746 5017 1983 9340 3692 12231 4835 16570 6551 20510 8109 8525 3505 12035 4948 16975 6979 21282 8749 15130 7354 21657 10527
20% 450 776 1087 1380 1673 1965 2256 2547 3102 3715 666 1279 1811 2301 2788 3274 3760 4245 5170 6191 2295 3335 4362 5286 6208 7129 8049 9802 HI VEL 3088 5091 6654 8297 9744 11189 12634 HI VEL HI VEL 2304 3289 4103 4847 5715 6453 7858 9411 3821 5419 6704 7851 8922 11167 13373 4329 6123 7541 8789 10934 13393 3792 7059 9244 12524 15502 6877 9708 13693 17167 14618 20924
30% 720 1242 1739 2209 2676 3143 3609 4075 4963 5944 1012 1944 2753 3497 4238 4977 5715 6453 7858 HI VEL 3534 5136 6718 8141 9561 10979 HI VEL HI VEL HI VEL 4624 7623 9963 12423 HI VEL HI VEL HI VEL HI VEL HI VEL 3480 4968 6198 7321 8633 9747 11870 14215 5732 8129 10056 11776 13384 16751 20060 6573 9297 11450 13345 16602 20335 5985 11143 14591 19769 24469 10514 14843 20936 26247 20344 29121
4" (DN100) Body Droop 10% 300 518 725 920 1115 1310 1504 1698 2068 2477 453 870 1232 1564 1896 2227 2557 2887 3516 4210 1791 2603 3405 4126 4846 5565 6283 7652 9163 2200 3627 4740 5910 6942 7971 9000 10960 13126 1576 2250 2808 3316 3910 4415 5377 6439 2547 3613 4469 5234 5948 7445 8916 2976 4209 5185 6042 7517 9207 2742 5104 6684 9056 11209 4736 6686 9431 11823 10157 14539
20% 660 1139 1594 2025 2453 2881 3309 3736 4550 5448 932 1790 2536 3221 3903 4584 5264 5943 7238 8668 3147 4573 5982 7249 8513 9776 11038 13442 16098 4275 7048 9212 11486 13490 15490 17490 21300 HI VEL 3250 4639 5788 6836 8061 9102 11084 13274 5166 7326 9063 10613 12062 15096 18079 5968 8441 10397 12117 15074 18464 5215 9709 12714 17225 21321 9605 13559 19125 23977 20344 29121
30% 1002 1729 2420 3074 3725 4375 5023 5672 6907 8272 1251 2404 3405 4325 5241 6156 7068 7981 9720 11640 4647 6754 8834 10706 12574 14438 16302 HI VEL HI VEL 6533 10771 14078 17553 20615 23672 HI VEL HI VEL HI VEL 4790 6838 8531 10076 11881 13415 16337 19565 7883 11179 13830 16196 18407 23037 27589 8992 12718 15665 18256 22712 27819 8283 15422 20195 27360 33866 14493 20459 28858 36179 28633 40985
NOTE: Where “Hi Vel” is indicated, the flow has reached or exceeded a velocity of Mach 0.35, an accepted limit for expanded steam on the downstream side. Use of higher velocities normally generate excessive noise levels. METRIC CONVERSION FACTOR: LBS/HR x 0.4536 = KG/HR
10
8310-BASIC-TB
TABLE 15 MODEL 8310 - “LP VARIATION” AIR CAPACITY - SCFH S.G. = 1.0 T = 60°F FL = 0.88 All Sizes - Composition Diaphragm Only Set Point Pressure - P2 psig (Barg)
2
(.14)
5
(.34)
10
(.69)
15
(1.0)
20
(1.4)
25
(1.7)
30
(2.1)
1-1/2" (DN40) Body 2" (DN50) Body Inlet Pressure Droop Droop psig (Barg) 10% 20% 30% 10% 20% 30% 25 (1.7) 21400 32700 33400 28000 45700 50000 50 (3.4) 34900 53300 54400 45600 74500 81500 75 (5.2) 48300 SONIC SONIC 63300 103300 SONIC 100 (6.9) 61800 SONIC SONIC 80900 SONIC SONIC 125 (8.6) SONIC SONIC SONIC 98600 SONIC SONIC 150 (10.3) SONIC SONIC SONIC SONIC SONIC SONIC 25 (1.7) 17800 30000 33400 22900 41900 48400 50 (3.4) 29000 49000 54400 37300 68300 78800 75 (5.2) 40300 67900 75400 51800 94600 109300 100 (6.9) 51500 SONIC SONIC 66200 121000 SONIC 125 (8.6) 62700 SONIC SONIC 80600 SONIC SONIC 150 (10.3) 73900 SONIC SONIC 95100 SONIC SONIC 25 (1.7) 7000 13700 19700 8000 16500 25400 50 (3.4) 11400 22400 32200 13100 27000 41500 75 (5.2) 15800 31100 44600 18100 37400 57500 100 (6.9) 20200 39700 57000 23200 47800 73600 125 (8.6) 24600 48400 69400 28200 58200 89600 150 (10.3) 29000 57000 81900 33300 68700 105600 25 (1.7) 8900 16700 23800 10600 21400 44400 50 (3.4) 15600 29000 41500 18500 37300 77400 75 (5.2) 21600 40300 57500 25600 51800 107300 100 (6.9) 27600 51500 73600 32700 66200 137200 125 (8.6) 33600 62700 89600 39900 80600 167100 150 (10.3) 39600 73900 105600 47000 95100 SONIC 25 (1.7) 9500 26400 22500 11600 22600 31500 50 (3.4) 20700 57500 49100 25300 49300 68500 75 (5.2) 28800 80000 68200 35100 68500 95200 100 (6.9) 36800 102300 87200 44900 87500 121700 125 (8.6) 44800 124500 106200 54700 106600 148300 150 (10.3) 52800 SONIC 125200 64400 125700 174800 50 (3.4) 27000 45300 53200 34300 63300 75500 75 (5.2) 38300 64100 75400 48600 89700 107000 100 (6.9) 48900 82000 96400 62200 114800 136800 125 (8.6) 59600 99900 117400 75700 139800 166700 150 (10.3) 70200 117800 138400 89300 164800 196500 50 (3.4) 34000 50100 50800 45600 70800 76300 75 (5.2) 50200 74000 75200 67400 104700 112800 100 (6.9) 64400 94900 96400 86400 134300 144600 125 (8.6) 78400 115600 117400 105300 163500 176100 150 (10.3) 92400 136300 138400 124100 192800 207600
2-1/2" (DN65) Body Droop 10% 20% 30% 32200 58800 67200 52500 95900 109500 72800 132900 151900 93100 SONIC SONIC 113300 SONIC SONIC 133600 SONIC SONIC 26900 52500 63700 43800 85500 103700 60700 118500 143800 77600 151500 SONIC 94500 SONIC SONIC 111400 SONIC SONIC 9900 19400 28800 16200 31700 47100 22400 44000 65300 28700 56300 83500 34900 68500 101700 41200 80800 119900 12500 25200 38500 21800 44000 67000 30200 61000 92900 38600 78000 118800 47000 95000 144700 55500 112000 170600 13100 26400 39800 28600 57500 86700 39700 80000 120500 50800 102300 154100 61800 124500 187700 72900 146800 221300 40000 76700 98000 56700 108700 138900 72500 139000 177700 88300 169300 216400 104000 199600 255100 52800 91800 104000 78100 135700 153800 100000 174000 197200 121900 211900 240100 143700 249800 283100
3" (DN80) Body Droop 10% 20% 30% 36900 74300 93200 60200 121200 151900 83400 168000 210600 106700 214800 SONIC 129900 SONIC SONIC 153200 SONIC SONIC 30600 60700 85300 49800 99000 139000 69000 137200 192700 88300 175400 246400 107500 213700 SONIC 126800 251900 SONIC 11200 34800 33500 18300 56800 54800 25300 78800 75900 32400 100800 97100 39400 122700 118300 46500 144700 139400 14500 28800 43800 25300 50200 76400 35100 69600 105900 44900 89000 135400 54700 108400 164900 64400 127800 194400 15400 30600 46400 33500 66700 101000 46600 92600 140400 59600 118400 179500 72600 144300 218600 85600 170100 257700 45700 88700 109000 64700 125700 154500 82800 160700 197500 100800 195800 240600 118800 230800 283600 61500 118900 145500 91000 175900 215200 116600 225500 275900 142000 274600 336000 167400 323800 396100
4" (DN100) Body Droop 10% 20% 30% 51600 103400 126000 84000 168500 205400 116500 233600 284800 149000 298700 364100 181400 363800 SONIC 213900 SONIC SONIC 42100 84700 120200 68700 138000 195900 95200 191300 271500 121700 244600 347200 148300 297900 422900 174800 351200 SONIC 15500 30400 46400 25300 49600 75700 35100 68700 105000 44900 87900 134300 54700 107100 163500 64400 126200 192800 20100 39500 60400 35100 68900 105200 48600 95500 145800 62200 122100 186500 75700 148700 227100 89300 175300 267800 21100 42100 64500 46000 91700 140600 63900 127400 195300 81700 162900 249700 99500 198500 304200 117300 234000 358600 63300 122400 183700 89700 173500 260300 114800 221800 332900 139800 270100 405400 164800 318500 478000 84000 167100 193600 124300 247100 286400 159300 316700 367100 194000 385700 447100 228700 454700 527100
NOTE: Where "SONIC" is indicated within the above capacity tables, outlet velocity with Schedule 40 pipe has reached sonic velocity of 1118 fps. Additional flow cannot be obtained, and pipeline velocity is in excess of customary pipe velocity design limits. Flow will be approximately the last indicated value in the column above "SONIC". METRIC CONVERSION FACTORS: SCFH ÷ 35.31 = Sm3/HR SCFH ÷ 37.32 = Nm3/HR
8310-BASIC-TB
11
TABLE 16 MODEL 8310 - “LP VARIATION” STEAM CAPACITY - LBS/HR S.G. = Actual T = Saturated FL = 0.88 All Sizes - Metal Diaphragm Set Point Pressure - P2 psig (Barg)
5
(.34)
10
(.69)
15
(1.0)
20
(1.4)
25
(1.7)
30
(2.1)
Inlet Pressure psig (Barg) 10 (.69) 25 (1.7) 50 (3.4) 75 (5.2) 100 (6.9) 125 (8.6) 150 (10.3) 175 (12.1) 200 (13.8) 250 (17.2) 300 (20.7) 25 (1.7) 50 (3.4) 75 (5.2) 100 (6.9) 125 (8.6) 150 (10.3) 175 (12.1) 200 (13.8) 250 (17.2) 300 (20.7) 25 (1.7) 50 (3.4) 75 (5.2) 100 (6.9) 125 (8.6) 150 (10.3) 175 (12.1) 200 (13.8) 250 (17.2) 300 (20.7) 25 (1.7) 50 (3.4) 75 (5.2) 100 (6.9) 125 (8.6) 150 (10.3) 175 (12.1) 200 (13.8) 250 (17.2) 300 (20.7) 50 (3.4) 75 (5.2) 100 (6.9) 125 (8.6) 150 (10.3) 175 (12.1) 200 (13.8) 250 (17.2) 300 (20.7) 50 (3.4) 75 (5.2) 100 (6.9) 125 (8.6) 150 (10.3) 175 (12.1) 200 (13.8) 250 (17.2) 300 (20.7)
1-1/2" DN40) Body Droop 10% 20% 30% 262 466 694 539 957 1425 897 HI VEL HI VEL 1231 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 174 336 601 300 579 1034 420 811 1448 534 1031 1842 647 1250 HI VEL 759 1466 HI VEL 872 1684 HI VEL 974 1880 HI VEL 1210 HI VEL HI VEL 1436 HI VEL HI VEL 224 437 666 429 838 1278 608 1188 1811 774 1510 2302 937 1830 HI VEL 1100 2147 HI VEL 1263 HI VEL HI VEL 1410 HI VEL HI VEL 1753 HI VEL HI VEL 2080 HI VEL HI VEL 248 468 655 612 1153 1615 863 1626 2277 1124 2118 HI VEL 1361 2567 HI VEL 1597 HI VEL HI VEL 1835 HI VEL HI VEL 2048 HI VEL HI VEL 2546 HI VEL HI VEL HI VEL HI VEL HI VEL 783 1422 2099 1139 2067 HI VEL 1492 2708 HI VEL 1808 HI VEL HI VEL 2121 HI VEL HI VEL 2436 HI VEL HI VEL 2720 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 993 1659 2142 1518 2534 3273 1956 3266 HI VEL 2433 HI VEL HI VEL 2854 HI VEL HI VEL 3279 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL
2" (DN50) Body Droop 10% 20% 30% 315 608 922 646 1248 1894 1076 2078 HI VEL 1477 HI VEL HI VEL 1879 HI VEL HI VEL 2276 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 198 402 721 341 693 1241 478 970 1738 608 1234 2210 736 1495 2678 864 1754 3142 993 2015 HI VEL 1108 2250 HI VEL 1377 2796 HI VEL 1635 HI VEL HI VEL 256 533 853 491 1022 1635 695 1448 2317 884 1842 2947 1071 2232 3571 1257 2618 HI VEL 1444 3008 HI VEL 1612 3358 HI VEL 2003 HI VEL HI VEL 2378 HI VEL HI VEL 289 574 891 712 1414 2196 1004 1994 3097 1308 2597 4034 1585 3147 HI VEL 1859 3691 HI VEL 2136 4241 HI VEL 2384 HI VEL HI VEL 2963 HI VEL HI VEL 3517 HI VEL HI VEL 948 1809 2911 1378 2630 4233 1805 3444 HI VEL 2187 4173 HI VEL 2566 4896 HI VEL 2948 HI VEL HI VEL 3290 HI VEL HI VEL 4090 HI VEL HI VEL 4854 HI VEL HI VEL 1203 2287 2971 1838 3495 4540 2368 4504 HI VEL 2946 5602 HI VEL 3456 HI VEL HI VEL 3970 HI VEL HI VEL 4432 HI VEL HI VEL 5509 HI VEL HI VEL HI VEL HI VEL HI VEL
2-1/2" (DN65) Body 3" (DN80) Body 4" (DN100) Body Droop Droop Droop 10% 20% 30% 10% 20% 30% 10% 20% 30% 370 706 1156 429 805 1329 586 1113 1844 760 1451 2376 881 1654 2731 1204 2287 3789 1266 2416 HI VEL 1466 2753 4546 2004 3808 6308 1738 3317 HI VEL 2013 3780 HI VEL 2752 5229 8661 2210 HI VEL HI VEL 2560 4807 HI VEL 3500 6649 HI VEL 2678 HI VEL HI VEL 3102 HI VEL HI VEL 4240 8057 HI VEL 3142 HI VEL HI VEL 3639 HI VEL HI VEL 4974 9451 HI VEL HI VEL HI VEL HI VEL 4181 HI VEL HI VEL 5715 HI VEL HI VEL HI VEL HI VEL HI VEL 4667 HI VEL HI VEL 6379 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 7930 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 9411 HI VEL HI VEL 234 451 793 276 523 961 378 721 1304 403 776 1365 476 900 1655 652 1241 2244 565 1086 1912 666 1260 2317 912 1738 3143 718 1381 2431 847 1602 2947 1160 2210 3997 870 1674 2946 1027 1942 3571 1406 2678 4843 1021 1964 3456 1204 2278 4189 1649 3142 5681 1173 2256 3970 1384 2617 4813 1895 3609 6527 1309 2518 HI VEL 1544 2921 5372 2115 4029 7286 1628 3130 HI VEL 1920 3631 6678 2629 5008 9057 1932 3715 HI VEL 2278 4309 HI VEL 3120 5944 10748 293 613 959 362 704 1119 432 954 1519 562 1175 1840 695 1349 2146 828 1829 2913 797 1666 2607 985 1912 3042 1173 2593 4128 1013 2118 3315 1252 2431 3868 1492 3297 5249 1227 2567 4017 1518 2946 4687 1808 3995 6361 1440 3011 4712 1780 3456 5498 2121 4686 7461 1654 3459 HI VEL 2045 3970 6317 2436 5384 8572 1847 3861 HI VEL 2283 4432 7051 2720 6010 9569 2295 4800 HI VEL 2838 5509 HI VEL 3381 7471 11895 2724 HI VEL HI VEL 3368 6538 HI VEL 4012 8866 14116 330 671 1038 387 773 1180 533 1074 1656 812 1655 2557 953 1905 2908 1314 2648 4082 1146 2334 3606 1344 2687 4101 1853 3734 5756 1492 3039 4697 1750 3500 5342 2413 4863 7497 1808 3682 5691 2120 4240 6472 2924 5892 9083 2121 4320 HI VEL 2487 4974 7592 3430 6912 10655 2436 4963 HI VEL 2857 5715 8723 3940 7941 12242 2720 5540 HI VEL 3190 6379 HI VEL 4398 8864 13665 3381 HI VEL HI VEL 3965 7930 HI VEL 5467 11018 HI VEL 4012 HI VEL HI VEL 4705 9411 HI VEL 6489 13076 HI VEL 1122 2128 3482 1277 2418 4101 1741 2902 5561 1631 3094 5063 1856 3516 5963 2531 4219 8087 2137 4052 6631 2431 4605 7810 3315 5526 10591 2589 4910 HI VEL 2946 5580 9463 4017 6695 12833 3037 5760 HI VEL 3456 6545 11101 4712 7854 15054 3489 6617 HI VEL 3970 7520 HI VEL 5414 9024 17295 3895 HI VEL HI VEL 4432 8394 HI VEL 6044 10073 HI VEL 4841 HI VEL HI VEL 5509 10434 HI VEL 7512 12521 HI VEL 5746 HI VEL HI VEL 6538 HI VEL HI VEL 8916 14859 HI VEL 1413 2661 3737 1631 3053 4265 2233 4183 5924 2158 4066 5710 2493 4665 6517 3412 6392 9052 2781 5239 7357 3212 6011 8397 4396 8236 11663 3459 6517 HI VEL 3995 7477 10445 5468 10244 14507 4058 7645 HI VEL 4686 8770 12252 6414 12017 17017 4662 HI VEL HI VEL 5384 10076 HI VEL 7369 13806 19551 5204 HI VEL HI VEL 6010 11248 HI VEL 8226 15411 HI VEL 6469 HI VEL HI VEL 7471 HI VEL HI VEL 10225 19157 HI VEL 7677 HI VEL HI VEL 8866 HI VEL HI VEL 12135 HI VEL HI VEL
NOTE: Where "HI VEL" is indicated, the flow has reached or exceeded a velocity of Mach 0.35, an accepted limit for expanded steam on the downstream side. Use of higher velocities normally generate excessive noise levels. METRIC CONVERSION FACTOR: LBS/HR x 0.4536 = KG/HR
12
8310-BASIC-TB
DIMENSIONS AND WEIGHTS – ENGLISH UNITS Dimensions - inches Size Inches
End Conn
A
C
B “LP”
1-1/2" *
2" **
2-1/2" 3" 4"
D
E
F
G
H
I
J
“LP”
“HP”
121
100
127
106
9.25
135
114
4.25
9.26
161
140
125/150# Flgd.
4.62
10.00
173
152
250/300# Flgd.
4.88
10.50
177
156
125/150# Flgd.
5.06
10.88
201
180
250/300# Flgd.
5.38
11.50
206
185
125/150# Flgd.
5.50
11.75
226
205
250/300# Flgd.
5.88
12.50
234
213
125/150# Flgd.
6.56
13.88
251
230
250/300# Flgd.
6.88
14.50
269
248
NPT
3.69
8.00
125/150# Flgd.
4.06
8.75
250/300# Flgd.
4.31
NPT
14.00
14.00
14.00 14.00 14.00
“HP”
Approximate Ship Weight lbs.
11.25
4.75
11.25
6.89
6.38
11.25
8.44
6.38
11.25
12.75
10.94
23.50
22.75
9.81
10.94
22.00
22.75
14.00
8.00
22.00
21.50
14.00
9.74
20.50
21.50
12.69
9.74
7.69
20.25
12.69
8.44
7.69
11.25
11.12
12.75
11.25
23.50
13.06
11.25
13.06
* 1-1/2" Size CS body material with Opt-34: "A" dim. = 7.31" & "B" dim = 14.00" ** 2" Size CS body material with Opt-34: "A" dim. = 7.38" & "B" dim = 14.00"
Option -20 Air Pressure Loaded
DIMENSIONS AND WEIGHTS – METRIC UNITS Size (DN)
(40) *
(50) **
(65) (80) (100)
Dimensions (mm)
Approximate Ship Weight (kg)
End Conn
A
B
NPT
94
203
125/150# Flgd.
103
222
250/300# Flgd.
110
235
61.23
51.70
NPT
108
235
73.02
63.49
125/150# Flgd.
117
254
78.46
58.94
250/300# Flgd.
124
267
80.27
70.75
125/150# Flgd.
129
276
91.16
81.63
250/300# Flgd.
137
292
125/150# Flgd.
140
298
250/300# Flgd.
149
318
125/150# Flgd.
167
352
250/300# Flgd.
175
368
C “LP” 356
356
356 356 356
“HP” 286
286
286 286 286
D
121
162
162 195 195
E
175
214
214 247 247
F
283
322
322 356 356
G
514
546
546 578 578
H
521
559
559 597 597
I
203
278
278 286 286
J
249
324
324 332 332
“LP”
“HP”
54.88
45.35
57.60
48.07
93.42
83.90
102.50
92.97
106.12
96.60
113.83
104.31
122.00
112.47
* DN40 Size CS body material with Opt-34: "A" dim. = 185mm & "B" dim = 356mm. ** DN50 Size CS body material with Opt-34: "A" dim. = 187mm & "B" dim = 356mm.
8310-BASIC-TB
13
NOTES
14
8310-BASIC-TB
MODEL 8310LP PRODUCT CODE
5B
Table 1
Table 3
Table 2
Size (DN)
Table 6
Table 5
TABLE 2 - BODY / SPRING CHAMBER MATERIAL
TABLE 1 - SIZE
in
Table 4
CODE
1-1/2"
(40)
8
2"
(50)
9
2-1/2" *
(65)
A
3" *
(80)
B
4" *
(100)
C
Body / Sp. Ch.
CODE
CI/CI
1
CS/CS
5
TABLE 3 - TRIM Desig.
CODE
S1
S1
S5
S5
S40
40
NOTE: See TB Table 2 for material limitations of Design Pressure Ratings.
TABLE 6 - RANGE SPRINGS
Description
CODE
NPT - Screwed
1
-30 Opt. Integral Flanged 125 LB Flgs CI Only
3
150 LB Flgs CS Only
6
250 LB Flgs CI Only
5
Dimension (Sizes 1-1/2" & 2" only) * -34 Opt. - 300 LB RF Flgs. 14" F to F Dimension (Sizes 1-1/2" & 2" only) *
7 V
W
* CS body material only. Nipples & flanges of same material as body.
8310-BASIC-TB
Table 7
Table 7
C
Table 7
TABLE 4 - Product Classification Under European "Pressure Equipment Directive" PRODUCT DESTINATION
HAZARD CATEGORY
CODE
Anywhere except Europe
N/A
7
Sound Engineering Practice (SEP)
S
CE Marked Hazard Cat I or II
E
* For products to be placed in service in Europe - Ref to Directive 97/23/EC. Forward Completed "EU" Application Recorder prior to quotation. (Without Recorder- Processing of Purchase Order will be delayed). Contact Cashco for Assistance.
TABLE 5 - END CONNECTIONS
-34 Opt. - 150 LB RF Flgs. 14" F to F
Table 7
European Countries *
* Flanged Only.
300 LB Flgs CS Only
Table 7
Table 7
Steel Range Spring psig
(Barg)
1-4*
(.07-.27)
3 - 10 8 - 30
Option
CODE
No Option
---
0
5
Closing Cap
-1
1
6
T-Bar & Locking Lever
-3
3
7
Stellited Seat Surfaces - S1 and S5 Trim Only
-15
A
Special Cleaning: Per Cashco Spec #S-1542.. . Epoxy Painted Per Cashco Spec #S-1547
-56
N
-95
W
Epoxy Painted Per Cashco Spec #S-1687 Offshore
-95OS
Y
CODE
(.21-.69) (.55-2.1)
* Composition Diaphragm Only.
TABLE 7 - OPTIONS Description
For Special Construction Other Than Above Contact Cashco for Special Product Code
1. NUMERIC digits assigned first in “ascending” order. 2. ALPHA designations are assigned second in “alphabetical” order. 3. Left justify. 4. Add “0” to all unused squares. 5. If insufficient quantity of squares, consult factory for proper code.
15
MODEL 8310HP PRODUCT CODE
7B
Table 1
Table 3
Table 2
TABLE 1 - SIZE Size (DN)
in
Table 4
Table 5
TABLE 2 - BODY / SPRING CHAMBER MATERIAL
CODE
1-1/2"
(40)
8
2"
(50)
9
2-1/2" *
(65)
A
3" *
(80)
B
4" *
(100)
C
Body / Sp. Ch.
CODE
CI/DI
1
CS/CS
5
09/23/13
Table 6
Desig.
CODE
S1
S1
S5
S5
S40
40
NOTE: See TB Table 1 for material limitations of Design Pressure Ratings.
CODE
NPT - Screwed
1
-30 Opt. Integral Flanged 125 LB Flgs CI Only
3
150 LB Flgs CS Only 250 LB Flgs CI Only 300 LB Flgs CS Only
7
Dimension (Sizes 1-1/2" & 2" only) *
Table 7
C
Table 7
TABLE 4 - Product Classification Under European "Pressure Equipment Directive" PRODUCT DESTINATION
HAZARD CATEGORY
CODE
Anywhere except Europe
N/A
7
Sound Engineering Practice (SEP)
S
CE Marked Hazard Cat I or II
E
Steel Range Spring psig
(Barg)
10 - 40
(.69-2.8)
TABLE 7 - OPTIONS Description
Option
CODE
No Option
---
0
1
Closing Cap
-1
1
8
T-Bar & Locking Lever
-3
3
CODE
30 - 100
(2.1-6.9)
6
75 - 145
(5.2-10.0)
9
Stellited Seat Surfaces - S1 and S5 Trim Only
-15
A
5
130 - 200 *
(9.0-13.8)
B
Special Cleaning: Per Cashco Spec #S-1542. . High Pressure Spring Chamber
-56
N
-80
U
Epoxy Painted Per Cashco Spec #S-1547
-95
W
Epoxy Painted Per Cashco Spec #S-1687 Offshore
-95OS
Y
V
W
* CS body material only. Nipples & flanges of same material as body.
Cashco, Inc. P.O. Box 6 Ellsworth, KS 67439-0006 PH: (785) 472-4461 Fax: (785) 472-3539 www.cashco.com E-mail: [email protected] [email protected] Printed in U.S.A. Model 8310-TB
Table 7
European Countries *
TABLE 6 - RANGE SPRINGS
Description
-34 Opt. - 300 LB RF Flgs. 14" F to F
Table 7
* For products to be placed in service in Europe - Ref to Directive 97/23/EC. Forward Completed "EU" Application Recorder prior to quotation. (Without Recorder- Processing of Purchase Order will be delayed). Contact Cashco for Assistance.
TABLE 5 - END CONNECTIONS
Dimension (Sizes 1-1/2" & 2" only) *
Table 7
TABLE 3 - TRIM
* Flanged Only.
-34 Opt. - 150 LB RF Flgs. 14" F to F
Table 7
Option-20 Dome Loaded
* Utiliize with Opt -80.
A
Must specify in Table 7.
For Special Construction Other Than Above Contact Cashco for Special Product Code
1. NUMERIC digits assigned first in “ascending” order. 2. ALPHA designations are assigned second in “alphabetical” order. 3. Left justify. 4. Add “0” to all unused squares. 5. If insufficient quantity of squares, consult factory for proper code.
8310-BASIC-TB 09-13
MODELS 8310LP AND 8310HP PRESSURE REDUCING REGULATORS The Models 8310LP and 8310HP are high capacity, self-contained pressure reducing regulators with a double-seat design. These units are utilized to control outlet (downstream) pressure between 1 – 200 psig (.07 – 13.8 Barg). Available in two outlet pressure designs; the Low Pressure, LP design has larger diaphragm for reduced pressures up to 30 psig (2.07 Barg), and the High Pressure design has a smaller diaphragm for reduced pressures up to 200 psig (13.8 Barg).
FEATURES High Capacity:
The double ported design provides high flow capacity, the highest capacity regulators Cashco manufactures due to dual ports.
High Stability:
Outstanding operation resulting from balanced design which minimizes imbalance plug forces, even at very high pressure drops. Diaphragm isolated from fluid velocity effects.
Heavy Guiding:
Plug is top and bottom guided with hardened stem guides.
Broad Setpoint Range:
8310LP: 1 – 30 psig (.07 – 2.07 Barg) 8310HP: 10 – 200 psig (.7 – 13.8 Barg)
High Pressure Drop Capability:
8310LP: Up to 200 psid (13.8 Bard). 8310HP: Up to 450 psid (31.0 Bard).
Model 8310HP
Model 8310LP
APPLICATIONS Designed for controlling a wide range of fluids including air, inert gases, chemicals, water, fuel oils and steam. See Table 4 for more information.
STANDARD GENERAL SPECIFICATIONS Variations:
LP – “Low Pressure” variation, larger diaphragm area. HP – “High Pressure” variation, smaller diaphragm area.
Body Sizes:
1-1/2", 2", 2-1/2", 3" and 4" (DN40, 50, 65, 80, 100)
End Connections:
NPT – 1-1/2" and 2" (DN40, 50) sizes only. Opt-30: Integral Flanged: CI with 125 lb. FF, CS with 150 lb. RF CI with 250 lb. RF, CS with 300 lb. RF Flanges – all sizes. Opt-34: 14" Face to Face Flange Dim. (CS - Sizes 1-1/2" & 2" only)
Body / Spring Chamber Material Combinations:
8310HP: CI/DI, CS/CS 8310LP: CI/CI, CS/CS CI = Cast Iron DI = Ductile Iron. CS = Cast Carbon Steel.
Inlet Pressure:
8310LP: Up to 200 psig (13.8 Barg). 8310HP: Up to 650 psig (44.8 Barg).
Outlet Pressure:
8310LP: 1 – 30 psig (.07 – 2.07 Barg). 8310HP: 10 – 145 psig (.7 – 10 Barg). 8310HP-80: 130 – 200 psig (9.0 – 13.8 Barg).
External Sensing:
3/8" NPT steel needle valve for downstream sensing connection.
Inlet Temperature:
-20° to +450°F. (-29° to +233°C.)
Gaskets:
Standard: Gaskets – Graphite/ NBR, TFE/AL-Silicate. O-ring – TFE.
Seat Leakage:
FCI 70-2
Trim Design:
316 SST, metal seated, balanced, double seated. Three material combination choices.
Capacities:
Up to 100 Cv.
Painting:
Standard: All non-corrosion resistant portions to be painted with corrosion resistant epoxy paint per Cashco Spec #S-1606. Alternate: See Opt-95 or -95OS.
NOTE: Refer to “OPTION SPECIFICATIONS” for alternative designs, and to the “TECHNICAL SPECIFICATIONS” tables for a more complete description of the above specifications.
Model 8310HP
OPTION SPECIFICATIONS This section indicates special variations which are available to the standard Model 8310 products. Multiple options may be selected; i.e. 8310HP -3+15, which is the standard 8310HP product plus Opt. -3 and Opt. -15 together. Care must be exhibited to not develop conflicting combinations; i.e. 8310HP-3+20.
Option -1:
2
CLOSING CAP. Use to prevent tampering with the set point pressure. Available on all spring chamber materials. Consists of a ductile iron closing cap, a sealing gasket, a sealing lock nut on the adjusting screw, and a 1/4" NPT female tapped spring chamber vent hole.
Option -1+6 DIFFERENTIAL CONSTRUCTION – And Option -1+8: SINGLE DIAPHRAGM, AND DIFFERENTIAL CONSTRUCTION – DOUBLE DIAPHRAGM. Refer to Technical Bulletin 8310-DIFF-TB for 8310HP’s utilized in differential pressure service.
8310-BASIC-TB
Option -3:
T-BAR AND LOCKING LEVER. All sizes. Utilized for frequent setpoint changes to range spring.
Option -15:
STELLITED SEATS. Stellited seating surfaces on metal seating portions of plug and on both seat rings. See Table 3 for maximum allowable pressure drops.
Option -20:
AIR PRESSURE LOADED. No range spring. Incorporates a cast iron or cast steel loading chamber. Use when the outlet pressure is frequently changed. This construction offers the regulators maximum capacity with minimum proportional band "droop" when compared to standard units with a range spring. See Table 1 for capacities. For 10 – 100 psig (.7 – 6.9 Barg) control pressures. ONLY AVAILABLE ON 8310HP VARIATION; NOT AVAILABLE ON 8310LP. Pressures vary in a nearly 1:1 ratio; i.e. 50 psig (3.4 Barg) loading pressure gives nearly a 50 psig (3.4 Barg) outlet pressure.
Option -56:
SPECIAL CLEANING. Cleaned per Cashco Specification #S-1542. Utilize when cleanliness level better than normal is required. NOT FOR OXYGEN SERVICE.
Option -80:
HIGH OUTLET PRESSURE CONSTRUCTION. Utilized for 130 – 200 psig (9.0 – 13.8 Barg) outlet pressure spring range. ONLY AVAILABLE WITH HP VARIATION. Special construction includes a diaphragm ring to reduce effective diaphragm area and serve as a travel stop in case of over-pressurization.
Option -95:
EPOXY PAINT. Special epoxy painting of all non-corrosion resistant external surfaces per Cashco Spec #S-1547. Utilized in harsh atmospheric conditions.
Option -95OS:
EPOXY PAINT. Special epoxy painting of all non-corrosion resistant external surfaces per Cashco Spec #S-1687 for OFFSHORE installations.
TABLE 1 8310HP-20 AIR PRESSURE LOADED Cv’s FOR COMPOSITION & METAL DIAPHRAGMS Valve Size in
(DN)
Comp. Diaph. Cv
Metal Diaph. Cv
1-1/2" 2" 2-1/2" 3" 4"
(40) (50) (65) (80) (100)
26 40 55 78 100
25 35 44 54 74
Option -30:
INTEGRAL FLANGED END CONNECTIONS. Available with 125# FF and 250# RF flanges for cast iron body material or with 150# RF or 300# RF flanges for cast steel body material.
Option -34:
SPECIAL 14" FACE TO FACE DIMENSION FOR FLANGED END CONNECTIONS. CS body material, sizes 1-1/2" & 2" with 150# or 300# RF flanges only. See Opt.-30 for standard face to face dimension.
8310-BASIC-TB
3
TECHNICAL SPECIFICATIONS TABLE 2 DESIGN PRESSURE-TEMPERATURE MATERIAL LIMITS Lower temperature limits will always measure -20 °F (-29 °C) MATERIAL SPECIFICATIONS DESCRIPTION ABBREV. (BODY/SP.CH.)
ASTM NO.
TEMPERATURE LIMITS OF TRIMS °F (°C)
INLET END CONN.
PRESSURE
OUTLET PRESSURE
METAL DIAPHRAGM S1 TRIM
TEMPERATURE
psig
(Barg)
°F
(°C)
200
(13.8)
150
190
(13.1)
200
(94)
175
(12.1)
250
(121)
165
(11.4)
300
(149)
140
(9.7)
400
(205)
psig
COMPOSITION DIAPHRAGM S5 TRIM
S40 TRIM
(Barg)
°F
(°C)
°F
(°C)
°F
(°C)
30
(2.1)
450
(232)
300
(149)
180
(83)
30
(2.1)
450
(232)
300
(149)
180
(83)
150
(66)
180
(83)
MODEL 8310LP
Cast Iron (CI/CI)
A126 Class B
125# Flgd.
250# Flgd. or NPT Cast Carbon Steel (CS/CS)
A216 Grade WCB
150# Flgd. 300# Flgd. or NPT
(66)
125
(8.6)
450
(232)
200
(13.8)
450
(232)
200
(13.8)
400
(205)
185
(12.8)
450
(232)
200
(13.8)
450
(232) MODEL 8310HP
125# Flgd.
Cast Iron/ Ductile Iron (CI/DI)
A126 Class B /A395, GR. 60-40-18
250# Flgd.
NPT
Cast Carbon Steel (CS/CS)
A216 Grade WCB
150# Flgd.
300# Flgd. or NPT
200
(13.8)
150
(66)
200
(13.8)
150
(66)
150
(66)
190
(13.1)
200
(94)
190
(13.1)
200
(94)
200
(94)
175
(12.1)
250
(121)
175
(12.1)
250
(121)
250
(121)
165
(11.4)
300
(149)
165
(11.4)
300
(149)
300
(149)
140
(9.7)
400
(204)
140
(9.7)
400
(205)
125
(8.6)
450
(232)
125
(8.6) & Lower
450
(232)
300
(149)
375
(25.9)
300
(149)
335
(23.1)
350
(177)
290
(20.0)
400
(205)
200
(13.8) & Lower
450
(232)
300
(149)
180
(83)
250
(17.2)
450
(232)
400
(27.6)
150
(66)
400
(27.6)
200
(94)
400
(27.6)
250
(121)
375
(25.9)
300
(149)
200
450
(232)
300
(149)
180
(83)
335
(23.1)
350
(177)
(13.8) & Lower
290
(20.0)
400
(205)
250
(17.2)
450
(232)
285
(19.7)
100
(38)
260
(17.9)
200
(94)
230
(15.9)
300
(149)
200
(13.8) & Lower
400
(205)
200
(13.8)
400
(205)
300
(149)
180
(83)
185
(12.8)
450
(232)
185
(12.8) & Lower
450
(232)
650
(44.8)
300
(149)
635
(43.8)
400
(205)
200
450
(232)
300
(149)
180
(83)
615
(41.4)
450
(232)
(13.8) & Lower
NOTE: See Table 7 for allowable over pressure limits.
4
8310-BASIC-TB
TABLE 3 MAXIMUM ALLOWABLE PRESSURE DROPS
Fluid
NonCavitating Liquid Cavitating Liquids Gas
Steam
Max. Recommended Operating Pressure Drop Model 8310LP Model 8310HP Clean Fluid Unclean Fluid All Fluid Qualities Industrial Quality Pipeline Quality psid (Bard) psid (Bard) psid (Bard) 150 (10.3) 200 (13.8) 100 (6.9) 150
(10.3)
Consult Factory
300
(20.7)
150
Consult Factory
(10.3) N/R
200
(13.8)
450
(31.0)
150
(10.3)
200
(13.8)
450
(31.0)
300
(20.7)
150
(10.3)
150
(10.3)
200
(13.8)
300
(20.7)
N/R 150
(10.3)
Option Number
None Stellited Opt-15 Stellited Opt-15 None Stellited Opt-15 None Stellited Opt-15
Trim Designation Number
All S1 Only All
S1 Only
N/R: Not Recommended
TABLE 4 APPLICATIONS Fluid
Recommended Construction
Air or Industrial Gases
Metal Seat & Composition Diaphragm Metal Seat & Diaphragm Metal Seat & Composition Diaphragm Metal Seat & Diaphragm Metal Seat & Composition Diaphragm Metal Seat & Diaphragm Metal Seat & Composition Diaphragm Metal Seat & Diaphragm
Trim Designation Number S40 S1 S5, S40 S1 S5, S40 S1 S40 S1
Metal Seat & Diaphragm
S1
Chemicals Hydrocarbon Gas or Liquids ‡ Water and Condensate Steam – Saturated or Superheated
‡ In accordance with ASME B31.3 “process piping”, do not use Cast Iron Body for hydrocarbon or flammable fluid service with inlet pressures greater than 150 Psig (10.3 Barg) or temperatures greater than 300° F (149° C).
8310-BASIC-TB
5
TABLE 5 STAINLESS STEEL TRIM MATERIAL COMBINATIONS SST Trim Designation Number Metal Diaphragm Composition Diaphragm S1 S5 S40 302 SST Fluorocarbon Elastomer Neoprene 316 SST 316 SST 316 SST 316 SST 316 SST 316 SST 316 SST 316 SST 316 SST 18-8 SST 18-8 SST 18-8 SST Hardened 440C SST Hardened 440C SST Hardened 440C SST ** ** ** 303 SST 303 SST 303 SST Steel Steel Steel TFE TFE TFE 303 SST 303 SST 303 SST Steel Steel Steel Steel Steel Steel Steel Steel Steel
Part Diaphragm Plug * Seat Rings Stem Groove Pin Stem Guides Bonnet Plug Pusher Plate Pusher Plate Nut Diaphragm Casing O-Ring Stem Bushing Bonnet Nut Needle Valve Pipe Nipple
“Plug Assembly” consists of factory-joined plug, stem and groove pin. Same as body material. NOTE: Cashco, Inc. does not recommend metal seated trim on any service where the flow will be dead ended down stream of the pressure reducing regulator. Use different Cashco model such as 1000HP/LP or DA1/DA3/DA4 composition seat for dead end service.
* **
TABLE 6 STEEL RANGE SPRINGS METAL OR COMPOSITION DIAPHRAGMS ALL SIZES
Construction
Standard Option -80
Figure 1 Opt.-20 Air Pressure Loaded
Range Spring “LP” Variation “HP” Variation 1–4 * (.07–.27) 10–40 (.69–2.8) 3–10 8–30
(.21–.69) 30–100 (2.1–6.9) (.55–2.1) 75–145 (5.2–10.0) N/A 130–200 (9.0–13.8) * Composition Diaphragm Only
N/A: Not Applicable
TABLE 7 OVER-PRESSURE LIMITS – SAFETY RELIEF VALVE SIZING & SETPOINT Range Spring Variation
LP
HP
psig
(Barg)
1–4
(.07-.27)
3-10
(.21-.69)
8-30
(.55-2.1)
10-40
(.69-2.8)
30-100 75-145 130–200
(2.1-6.9) (5.2-10.0) (9.0-13.8)
Diaphragm Material
* Emergency Over-Pressure (Rise over Setpoint)
Maximum Cv with Valve Plug Wide Open Body Size - in / (mm) 2" 2-1/2" 3" (DN50) (DN65) (DN80)
psig
(Barg)
1-1/2" (DN40)
4" (DN100)
All
20
(1.4)
27
40
55
76
100
All
35
(2.4)
27
40
55
76
100
All
45
(3.1)
* Exceeding the “Emergency Over-Pressure” level may cause mechanical damage to internal parts of the valve. 6
8310-BASIC-TB
LP VARIATION TABLE 8 8310LP CAPACITY TABLES – Cv – METAL DIAPHRAGM Set Point (Outlet) Pressure, P2 psig (Barg) 5 (.34) *10 (.69) 15 (1.0) 20 (1.4) 25 (1.7) 30 (2.1)
1-1/2" (DN40) Body Droop 10% 20% 30% 8.5 15.1 22.5 2.9 5.6 10.0 4.2 8.2 12.5 6.1 11.5 16.1 8.1 14.7 21.7 10.9 18.2 23.5
2" (DN50) Body Droop 10% 20% 30% 10.2 19.7 29.9 3.3 6.7 12.0 4.8 10.0 16.0 7.1 14.1 21.9 9.8 18.7 30.1 13.2 25.1 32.6
2-1/2" (DN65) Body Droop 10% 20% 30% 12.0 22.9 37.5 3.9 7.5 13.2 5.5 11.5 18.0 8.1 16.5 25.5 11.6 22.0 36.0 15.5 29.2 41.0
3" (DN80) Body Droop 10% 20% 30% 13.9 26.1 43.1 4.6 8.7 16.0 6.8 13.2 21.0 9.5 19.0 29.0 13.2 25.0 42.4 17.9 33.5 46.8
4" (DN100) Body Droop 10% 20% 30% 19.0 36.1 59.8 6.3 12.0 21.7 8.1 17.9 28.5 13.1 26.4 40.7 18.0 30.0 57.5 24.5 45.9 65.0
* Utilizes 8 - 30 psig (.55 - 2.1 Barg) range spring TABLE 9 8310LP CAPACITY TABLES – Cv – COMPOSITION DIAPHRAGM Set Point (Outlet) Pressure, P2 psig (Barg) 2 (.14) 5 (.34) *10 (.69) 15 (1.0) 20 (1.4) 25 (1.7) 30 (2.1)
*
1-1/2" (DN40) Body Droop 10% 20% 30% 16.8 25.7 26.2 14.0 23.6 26.2 5.5 10.8 15.5 7.5 14.0 20.0 10.0 17.8 23.7 13.3 22.3 26.2 17.5 25.8 26.2
2" (DN50) Body Droop 10% 20% 30% 22.0 35.9 39.3 18.0 32.9 38.0 6.3 13.0 20.0 8.9 18.0 37.3 12.2 23.8 33.1 16.9 31.2 37.2 23.5 36.5 39.3
2-1/2" (DN65) Body Droop 10% 20% 30% 25.3 46.2 52.8 21.1 41.2 50.0 7.8 15.3 22.7 10.5 21.2 32.3 13.8 27.8 41.9 19.7 37.8 48.3 27.2 47.3 53.6
3" (DN80) Body Droop 10% 20% 30% 29.0 58.4 73.2 24.0 47.7 67.0 8.8 27.4 26.4 12.2 24.2 36.8 16.2 32.2 48.8 22.5 43.7 53.7 31.7 61.3 75.0
4" (DN100) Body Droop 10% 20% 30% 40.5 81.2 99.0 33.1 66.5 94.4 12.2 23.9 36.5 16.9 33.2 50.7 22.2 44.3 67.9 31.2 60.3 90.5 43.3 86.1 99.8
Utilizes 8 - 30 psig (.55 - 2.1 Barg) range spring
HP VARIATION TABLE 10 8310HP CAPACITY TABLES – Cv – METAL DIAPHRAGM Set Point (Outlet) Pressure, P2 psig (Barg) 10 (.69) 15 (1.0) 25 (1.7) 35 (2.4) 50 (3.4) 75 (5.2) 100 (6.9) 140 (9.7) 150 (10.3) 200 (13.8)
1-1/2" (DN40) Body Droop 10% 20% 30% 2.0 4.2 7.5 3.0 8.0 12.0 7.5 14.0 19.0 11.5 19.7 25.2 6.2 11.7 16.7 8.5 15.5 21.0 8.7 18.0 21.2 10.8 18.5 24.0 11.4 19.5 25.0 14.0 23.5 26.0
2" (DN50) Body Droop 10% 20% 30% 2.6 6.3 9.0 4.0 9.2 14.5 8.7 18.0 26.5 14.0 27.5 35.7 7.3 14.8 22.0 10.0 20.3 29.0 10.5 21.0 29.5 12.5 25.0 33.5 13.8 27.1 35.5 18.7 33.4 38.5
2-1/2" (DN65) Body Droop 10% 20% 30% 3.0 6.8 10.5 5.0 11.2 16.5 10.0 21.0 31.3 16.5 32.3 45.7 8.0 16.8 25.2 11.2 23.5 35.0 12.0 23.8 36.0 15.0 28.8 43.0 16.2 31.9 45.0 21.2 41.3 50.2
3" (DN80) Body Droop 10% 20% 30% 4.0 7.5 12.0 6.0 12.5 19.0 11.7 23.7 36.5 18.7 37.2 55.7 9.5 19.0 28.7 13.0 27.0 40.5 13.7 27.2 41.3 17.0 32.5 51.3 18.5 36.3 55.5 24.4 48.5 67.5
4" (DN100) Body Droop 10% 20% 30% 5.0 11.0 16.7 8.5 17.5 23.5 18.5 32.5 48.0 26.5 51.5 78.7 13.0 26.8 39.5 18.0 36.5 55.7 18.7 37.5 56.5 23.5 44.7 71.0 25.0 50.7 76.5 33.7 67.5 95.0
TABLE 11 8310HP CAPACITY TABLES – Cv – COMPOSITION DIAPHRAGM Set Point (Outlet) Pressure, P2 psig (Barg) 10 (.69) 15 (1.0) 25 (1.7) 35 (2.4) 50 (3.4) 75 (5.2) 100 (6.9) 140 (9.7) 150 (10.3) 200 (13.8)
1-1/2" (DN40) Body Droop 10% 20% 30% 6.0 11.2 16.2 7.5 13.8 19.5 10.5 19.0 25.0 16.0 25.4 26.2 10.5 18.7 24.5 15.2 24.7 26.2 12.1 21.3 26.0 16.5 26.0 26.0 17.8 26.2 26.2 21.2 26.2 26.2
2" (DN50) Body Droop 10% 20% 30% 7.0 14.0 21.5 9.1 18.7 27.2 13.0 26.3 34.8 21.4 35.7 39.0 13.0 26.1 34.2 20.2 34.7 38.7 15.7 29.4 36.9 22.4 38.0 37.0 24.4 37.0 39.3 29.1 38.8 39.5
2-1/2" (DN65) Body Droop 10% 20% 30% 8.0 16.2 24.8 11.2 21.2 32.1 15.0 31.0 44.3 24.5 45.7 52.4 15.0 30.0 43.7 22.9 43.7 51.2 17.7 36.0 47.5 26.0 50.0 52.5 28.0 37.9 53.8 35.1 51.5 55.0
3" (DN80) Body Droop 10% 20% 30% 9.2 18.7 28.7 12.5 24.1 36.5 17.6 35.5 53.5 28.1 56.5 72.2 17.4 34.8 52.1 26.5 52.8 70.0 20.4 41.2 61.3 30.0 67.0 72.0 32.4 62.5 75.2 40.2 70.8 78.0
4" DN100) Body Droop 10% 20% 30% 13.0 26.2 39.1 17.0 33.5 50.8 24.0 48.8 73.7 38.8 78.7 98.2 24.0 47.5 72.2 36.7 72.8 97.5 28.0 57.0 86.0 41.5 95.0 97.0 44.2 88.5 100.0 55.1 97.5 100.0
METRIC CONVERSION FACTORS: Cv ÷ 1.16 = kv
8310-BASIC-TB
7
TABLE 12 MODEL 8310 – “HP VARIATION” WATER CAPACITY – GPM S.G. = 1.0 T = 60°F FL = 0.88 ALL Sizes – Set Point Pressure - P2 psig 10
15
25
35
50
75
100
140
150
200
Inlet Pressure
(Barg) psig 50 (.69) 75 100 50 75 (1.0) 100 125 50 75 100 (1.7) 125 150 175 50 75 100 125 (2.4) 150 175 200 250 75 100 125 150 (3.4) 175 200 250 300 100 125 150 (5.2) 175 200 250 300 125 150 175 (6.9) 200 250 300 150 175 (9.7) 200 250 300 175 200 (10.3) 250 300 250 (13.8) 300
(Barg) (3.4) (5.2) (6.9) (3.4) (5.2) (6.9) (8.6) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (10.3) (12.1) (13.8) (17.2) (20.7) (12.1) (13.8) (17.2) (20.7) (17.2) (20.7)
Composition Diaphragm Only
1-1/2" (DN40) Body
2" (DN50) Body
2-1/2" (DN65) Body
3" (DN80) Body
Droop
Droop
Droop
Droop
10% 37.9 48.4 CAV 44.4 58.1 69.1 CAV 52.5 74.2 90.9 105.0 117.4 CAV 62.0 101.2 129.0 151.8 HI VEL HI VEL HI VEL CAV 52.5 74.2 90.9 105.0 117.4 128.6 148.5 CAV 76.0 107.5 131.6 152.0 HI VEL HI VEL HI VEL 60.5 85.6 104.8 121.0 148.2 HI VEL 52.2 97.6 127.8 HI VEL HI VEL 89.0 125.9 HI VEL HI VEL 149.9 HI VEL
20% 70.8 90.3 CAV 81.6 106.9 127.2 CAV 95.0 134.4 HI VEL HI VEL HI VEL CAV 98.4 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL CAV 93.5 132.2 HI VEL HI VEL HI VEL HI VEL HI VEL CAV 123.5 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 106.5 150.6 HI VEL HI VEL HI VEL HI VEL 82.2 153.8 HI VEL HI VEL HI VEL 131.0 HI VEL HI VEL HI VEL HI VEL HI VEL
30% 102.5 130.6 CAV 115.4 151.0 HI VEL CAV 125.0 HI VEL HI VEL HI VEL HI VEL CAV 101.5 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL CAV 122.5 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL CAV 131.0 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 130.0 HI VEL HI VEL HI VEL HI VEL HI VEL 82.2 153.8 HI VEL HI VEL HI VEL 131.0 HI VEL HI VEL HI VEL HI VEL HI VEL
10% 44.3 56.4 CAV 53.8 70.5 83.9 CAV 65.0 91.9 112.6 130.0 145.3 CAV 82.9 135.3 172.5 203.0 229.5 253.2 274.9 CAV 65.0 91.9 112.6 130.0 145.3 159.2 183.8 CAV 101.0 142.8 174.9 202.0 225.8 267.2 HI VEL 78.5 111.0 136.0 157.0 192.3 222.0 70.8 132.5 173.5 234.9 HI VEL 122.0 172.5 244.0 HI VEL 205.8 HI VEL
20% 88.5 112.9 CAV 110.6 144.8 172.4 CAV 131.5 186.0 227.8 263.0 HI VEL CAV 138.3 225.8 HI VEL HI VEL HI VEL HI VEL HI VEL CAV 130.5 184.6 226.0 261.0 HI VEL HI VEL HI VEL CAV 173.5 245.4 HI VEL HI VEL HI VEL HI VEL HI VEL 147.0 207.9 254.6 HI VEL HI VEL HI VEL 120.2 224.8 HI VEL HI VEL HI VEL 185.0 261.6 HI VEL HI VEL 274.4 HI VEL
30% 136 173.3 CAV 160.9 210.7 250.8 CAV 174.0 246.1 HI VEL HI VEL HI VEL CAV 151.0 246.7 HI VEL HI VEL HI VEL HI VEL HI VEL CAV 171.0 241.8 HI VEL HI VEL HI VEL HI VEL HI VEL CAV 193.5 273.7 HI VEL HI VEL HI VEL HI VEL HI VEL 184.5 260.9 HI VEL HI VEL HI VEL HI VEL 117.0 218.9 HI VEL HI VEL HI VEL 196.5 277.9 HI VEL HI VEL 279.3 HI VEL
10% 50.6 64.5 CAV 66.3 86.8 103.3 CAV 75.0 106.1 129.9 150.0 167.7 CAV 94.9 155.0 197.5 232.4 262.7 289.9 314.7 CAV 75.0 106.1 129.9 150.0 167.7 183.7 212.1 CAV 114.5 161.9 198.3 229.0 256.0 302.9 343.5 88.5 125.2 153.3 177.0 216.8 250.3 82.2 153.8 201.4 272.7 328.9 140.0 198.0 280.0 342.9 248.2 351.0
20% 102.5 130.6 CAV 125.4 164.2 195.5 CAV 155.0 219.2 268.5 310.0 346.6 CAV 177.0 289.0 368.4 HI VEL HI VEL HI VEL HI VEL CAV 150.0 212.1 259.8 300.0 335.4 367.4 424.3 CAV 218.5 309.0 378.5 HI VEL HI VEL HI VEL HI VEL 180.0 254.6 311.8 360.0 HI VEL HI VEL 158.1 295.8 387.3 HI VEL HI VEL 189.5 268.0 379.0 HI VEL 364.2 HI VEL
30% 156.8 199.9 CAV 189.9 248.6 295.9 CAV 221.5 313.2 383.6 HI VEL HI VEL CAV 202.9 331.4 422.5 HI VEL HI VEL HI VEL HI VEL CAV 218.5 309.0 378.5 HI VEL HI VEL HI VEL HI VEL CAV 256.0 362.0 HI VEL HI VEL HI VEL HI VEL HI VEL 237.5 335.9 411.4 HI VEL HI VEL HI VEL 166.0 310.6 406.7 HI VEL HI VEL 269.0 380.4 HI VEL HI VEL 388.9 HI VEL
10% 58.2 74.2 CAV 74.0 96.8 115.2 CAV 88.0 124.5 152.4 176.0 196.8 CAV 108.8 177.7 226.5 266.6 301.3 332.5 361.0 CAV 87.0 123.0 150.7 174.0 194.5 213.1 246.1 CAV 132.5 187.4 229.5 265.0 296.3 350.6 397.5 102.0 144.2 176.7 204.0 249.8 288.5 94.9 177.5 232.4 314.6 379.5 162.0 229.1 324.0 396.8 284.3 402.0
20% 118.3 150.8 CAV 142.6 186.7 222.2 CAV 177.5 251.0 307.4 355.0 396.9 CAV 218.8 357.3 455.5 536.0 605.9 668.5 HI VEL CAV 174.0 246.1 301.4 348.0 389.1 426.2 492.1 CAV 264.0 373.4 457.3 528.0 590.3 698.5 HI VEL 206.0 291.3 356.8 412.0 504.6 582.7 211.9 396.4 519.0 702.7 HI VEL 312.5 441.9 625.0 HI VEL 500.6 708.0
4" (DN100) Body Droop
30% 181.5 231.4 CAV 215.9 282.7 336.5 CAV 267.5 378.3 463.3 535.0 598.1 CAV 279.6 456.6 582.1 684.9 HI VEL HI VEL HI VEL CAV 260.5 368.4 451.2 521.0 582.5 638.1 HI VEL CAV 350.0 495.0 606.2 700.0 HI VEL HI VEL HI VEL 306.5 433.5 530.9 613.0 HI VEL HI VEL 227.7 426.0 557.7 HI VEL HI VEL 376.0 531.7 HI VEL HI VEL 551.5 HI VEL
10% 20% 30% 82.2 165.7 247.3 104.8 211.2 315.2 CAV CAV CAV 100.6 198.2 300.5 131.7 259.5 393.5 156.7 308.9 468.4 CAV CAV CAV 120.0 244.0 368.5 169.7 345.1 521.1 207.8 422.6 638.3 240.0 488.0 737.0 268.3 545.6 824.0 CAV CAV CAV 150.3 304.8 380.3 245.4 497.7 621.1 312.8 634.5 791.7 368.1 746.6 931.6 416.1 844.0 1053.1 459.1 931.2 1161.9 498.4 1010.9 1261.4 CAV CAV CAV 120.0 237.5 361.0 169.7 335.9 510.5 207.8 411.4 625.3 240.0 475.0 722.0 268.3 531.1 807.2 293.9 581.8 884.3 339.4 671.8 1021.1 CAV CAV CAV 183.5 364.0 487.5 259.5 514.8 689.4 317.8 630.5 844.4 367.0 728.0 975.0 410.3 813.9 1090.1 485.5 963.1 1289.8 550.5 1092 HI VEL 140.0 285.0 430.0 198.0 403.1 608.1 242.5 493.6 744.8 280.0 570.0 860.0 342.9 698.1 1053.3 396.0 806.1 1216.2 131.2 300.4 306.7 245.5 562.0 573.9 321.5 735.9 751.4 435.3 996.4 1017.3 524.9 1201.7 1227.0 221.0 442.5 500.0 312.5 625.8 707.1 442.0 885.0 1000 541.3 1083.9 1224.7 389.6 689.4 707.1 551.0 975.0 1000
NOTE: Where “CAV” is indicated within the above capacity tables, the water has reached full cavitation, and flow is choked. Where “HI VEL” is indicated, the flow has reached or exceeded the velocities to the right based on Schedule 40 pipe. METRIC CONVERSION FACTOR: GPM x 3.785 = LPM in 1-1/2" 2" 2-1/2" 3" 4"
8
SIZE (DN) (40) (50) (65) (80) (100)
MAX. VEL 25 fps 27 fps 29 fps 31 fps 35 fps
8310-BASIC-TB
TABLE 13 MODEL 8310 – “HP VARIATION” AIR CAPACITY – SCFH S.G. = 1.0 T = 60°F FL = 0.88 ALL Sizes – Composition Diaphragm Only Set Point Pressure - P2 psig
(Barg)
10
(.69)
15
(1.0)
25
(1.7)
35
(2.4)
50
(3.4)
75
(5.2)
100
(6.9)
14
(9.7)
150
(10.3)
200
(13.8)
Inlet Pressure psig 50 75 100 125 150 175 200 250 300 50 75 100 125 150 175 200 250 300 50 75 100 125 150 175 200 250 300 50 75 100 125 150 175 200 250 300 75 100 125 150 175 200 250 300 100 125 150 175 200 250 300 125 150 175 200 250 300 150 175 200 250 300 175 200 250 300 250 300
(Barg) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (10.3) (12.1) (13.8) (17.2) (20.7) (12.1) (13.8) (17.2) (20.7) (17.2) (20.7)
1-1/2" (DN40) Body 10% 12400 17300 22100 26900 31700 36500 41300 50900 60600 15600 21600 27600 33600 39600 45600 51600 63700 75700 21300 30200 38600 47000 55500 63900 72300 89100 106000 28600 45400 58900 71700 84500 97300 110200 135800 161500 26900 37800 46900 55500 63900 72300 89100 106000 45300 63700 78500 91900 104600 129000 153400 40500 56900 69900 81500 102500 122100 40400 74900 97900 133800 164400 70500 99400 141300 175700 134300 190500
Droop 20% 23200 32200 41200 50200 59200 68100 77100 95100 SONIC 28600 39700 50800 61800 72900 83900 95000 SONIC SONIC 38600 54700 69900 85100 100300 115600 130800 SONIC SONIC 45400 72100 93400 113800 134200 154500 174900 SONIC SONIC 47900 67300 83600 98800 113800 128700 158700 188700 73700 103500 127600 149400 170000 209700 249300 71200 100200 123100 143400 180400 215000 63700 118100 154300 210900 259000 103800 146300 208000 258600 166000 235400
30% 33600 46600 59600 72600 85600 SONIC SONIC SONIC SONIC 40500 56100 71700 87400 103000 SONIC SONIC SONIC SONIC 50700 71900 92000 112000 132000 152100 SONIC SONIC SONIC 46900 74400 96400 117400 138400 159400 180400 SONIC SONIC 62700 88100 109500 129400 149000 168700 208000 247200 78100 109800 135400 158500 180300 222400 264400 86900 122300 150300 175100 220200 262400 63700 118100 154300 210900 259000 103800 146300 208000 258600 166000 235400
2" (DN50) Body 10% 14500 20100 25700 31400 37000 42600 48200 59400 70600 18900 26200 33500 40800 48100 55400 62700 77200 91800 26400 37400 47800 58200 68700 79100 89500 110300 131200 38300 60800 78700 95900 113000 130200 147300 181700 216000 33300 46800 58100 68700 79100 89500 110300 131200 60200 84600 104400 122200 139000 171500 203900 52500 73800 90700 105700 133000 158400 54900 101700 132900 181700 223100 96700 136200 193700 240900 184400 261500
Droop 20% 29000 40300 51500 62700 73900 85200 96400 118800 141300 38800 53800 68800 83800 98800 113800 128700 158700 188700 53400 75700 96700 117800 138900 160000 181100 223200 SONIC 63900 101400 131300 159900 188600 217200 245800 303000 SONIC 66800 93900 116700 137800 158800 179700 221500 263400 103500 145400 179300 209900 238800 294500 350200 98300 138300 169900 198000 249000 296700 93100 172600 225500 308200 378500 146600 206500 293700 365200 245900 348600
30% 44600 61800 79100 96300 113600 130800 148000 SONIC SONIC 56400 78200 100000 121900 143700 165500 187300 SONIC SONIC 70600 100100 128000 155900 183800 211700 239600 SONIC SONIC 69800 110700 143400 174700 206000 237200 268500 SONIC SONIC 87600 123000 152900 180600 208000 235500 290300 345100 115400 162100 199900 234100 266300 328500 390500 123400 173500 213300 248500 312500 372400 90600 168000 219600 300100 368500 155800 219400 312000 387900 250300 354900
2-1/2" (DN65) Body 10% 16600 23000 29400 35800 42300 48700 55100 67900 80700 23200 32200 41200 50200 59200 68100 77100 95100 113000 30400 43100 55200 67200 79200 91200 103300 127300 151400 43800 69600 90100 109800 129400 149000 168700 208000 247200 38400 54000 67000 79200 91200 103300 127300 151400 68300 95900 118300 138500 157600 194400 231100 59200 83200 102300 119200 149900 178600 63700 118100 154300 210900 259000 111000 156300 222300 276400 222400 315400
Droop 20% 33600 46600 59600 72600 85600 98500 111500 137500 163500 44000 61000 78000 95000 112000 129000 146000 180000 213900 62900 89200 114000 138900 163700 188600 213400 263100 312800 81700 129700 168100 204700 241400 278000 314600 387900 SONIC 76800 107900 134100 158400 182500 206500 254700 302800 130300 183100 225800 264300 300700 370900 441000 120400 169300 208100 242400 304900 363300 122500 227100 296800 405500 498000 150200 211600 300800 374100 326300 462700
30% 51500 71300 91200 111100 131000 150900 170700 210500 SONIC 66600 92300 118100 143800 169500 195300 221000 SONIC SONIC 89900 127400 162900 198500 234000 269500 305000 SONIC SONIC 93700 148800 192700 234700 276800 318800 360800 444800 SONIC 111900 157200 195300 230800 265800 300900 370900 441000 152700 214500 264500 309700 352300 434600 516700 158800 223400 274500 319900 402300 479400 128600 238400 311600 425800 522900 213200 300300 427100 531100 348500 494200
3" (DN80) Body 10% 19100 26500 33800 41200 48600 56000 63300 78100 92800 25900 36000 46000 56000 66000 76000 86100 106100 126100 35700 50600 64700 78800 93000 107100 121200 149400 177600 50300 79800 103400 125900 148400 170900 193500 238500 283600 44600 62600 77800 91900 105800 119800 147700 175600 79000 111000 136900 160300 182300 224900 267400 68200 95900 117900 137400 172800 205900 73500 136200 178100 243300 298800 128400 180900 257200 319800 254700 361200
Droop 20% 38800 53800 68800 83800 98800 113800 128700 158700 188700 50000 69300 88600 108000 127300 146600 165900 204600 243200 72000 102100 130600 159000 187500 216000 244400 301300 358300 101100 160400 207800 253100 298400 343700 389000 479600 570200 89100 125200 155500 183800 211700 239600 295400 351200 157500 221200 272800 319300 363300 448200 532800 137800 193700 238100 277500 348900 415800 164100 304300 397700 543400 667400 247700 348900 496100 616900 448600 636200
30% 59500 82600 105600 128600 151600 174600 197600 243600 289600 75700 105000 134300 163500 192800 222000 251300 309800 368300 108600 153900 196800 239700 282600 325500 368300 454100 539900 129100 205000 265600 323400 381300 439200 497100 612900 SONIC 133400 187400 232900 275200 316900 358700 442200 525800 208800 293300 361600 423400 481700 594200 706400 205000 288300 354300 412800 519100 618600 176400 327000 427300 584000 717200 298000 419800 596900 742300 494200 700800
4" (DN100) Body 10% 27000 37400 47800 58200 68700 79100 89500 110300 131200 35300 48900 62500 76200 89800 103400 117000 144300 171600 48700 69000 88300 107500 126800 146000 165200 203700 242200 69400 110200 142700 173800 204900 236000 267100 329300 391600 61500 86300 107300 126800 146000 165200 203700 242200 109400 153700 189600 222000 252500 311500 370400 93600 131700 161800 188600 237100 282600 101700 188500 246300 336600 413400 175200 246700 350900 436300 349100 495100
Droop 20% 54400 75400 96400 117400 138400 159400 180400 222400 264400 69500 96400 123200 150100 176900 203800 230600 284400 338100 99000 140400 179500 218600 257700 296900 336000 414200 492500 140800 223400 289500 352600 415700 478800 541800 668000 794200 121700 170900 212300 250900 289000 327000 403200 479400 217100 305000 376100 440300 500900 618000 734700 190600 268000 329500 383900 482700 575200 232700 431400 563800 770500 946300 350700 494000 702500 873600 617800 876100
30% 81100 112500 143800 175200 206500 237900 269200 331900 394600 105400 146100 186900 227600 268300 309000 349800 431200 512700 149600 212000 271100 330200 389300 448300 507400 625600 743800 175600 278800 361200 439900 518600 597400 676100 833600 991000 184900 259800 322700 381300 439200 497100 612900 728600 290800 408500 503700 589700 670900 827600 983900 287600 404400 497100 579200 728300 867900 237600 440500 575700 786700 966200 396300 558200 793800 987100 633600 898500
NOTE: Where “SONIC” is indicated within the above capacity tables, outlet velocity with Schedule 40 pipe has reached sonic velocity of 1118 fps. Additional flow cannot be obtained, and pipeline velocity is in excess of customary pipe velocity design limits. Flow will be approximately the last indicated value in the column above “SONIC”. METRIC CONVERSION FACTORS: SCFH ÷ 35.31 = Sm3/HR SCFH ÷ 37.32 = Nm3/HR
8310-BASIC-TB
9
TABLE 14 MODEL 8310 – “HP VARIATION” STEAM CAPACITY – LBS/HR S.G. = Actual T = Saturated FL = 0.88 ALL Sizes – Set Point Pressure - P2 psig
(Barg)
10
(.69)
15
(1.0)
25
(1.7)
35
(2.4)
50
(3.4)
75
(5.2)
100
(6.9)
140
(9.7)
150
(10.3)
200
(13.8)
Inlet Pressure psig 25 50 75 100 125 150 175 200 250 300 25 50 75 100 125 150 175 200 250 300 50 75 100 125 150 175 200 250 300 50 75 100 125 150 175 200 250 300 75 100 125 150 175 200 250 300 100 125 150 175 200 250 300 125 150 175 200 250 300 150 175 200 250 300 175 200 250 300 250 300
(Barg) (1.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (1.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (3.4) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (5.2) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (6.9) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (8.6) (10.3) (12.1) (13.8) (17.2) (20.7) (10.3) (12.1) (13.8) (17.2) (20.7) (12.1) (13.8) (17.2) (20.7) (17.2) (20.7)
1-1/2" (Dn40) Body Droop 10% 120 207 290 368 446 524 602 679 827 991 160 307 435 552 669 786 902 1019 1241 1486 726 1055 1380 1673 1965 2256 2547 HI VEL HI VEL 955 1574 2057 2565 3012 3459 HI VEL HI VEL HI VEL 752 1073 1339 1582 1865 2106 2564 3071 1203 1706 2111 2471 2809 3516 4210 1385 1958 2412 2811 3497 4284 1260 2346 3072 4162 5151 2160 3049 4300 5391 4220 6040
20% 252 435 609 773 937 1100 1263 1426 1737 HI VEL 426 818 1159 1472 1784 2096 HI VEL HI VEL HI VEL HI VEL 1355 1970 2577 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 1635 2696 3524 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 1419 2025 2527 2985 3519 3974 4839 HI VEL 2194 3111 3849 4507 5122 6411 HI VEL 2865 4052 4991 5816 7236 HI VEL 2158 4018 5262 7129 8824 3694 5215 7356 9222 7083 10138
Metal Diaphragm
2" (DN50) Body Droop
30% 10% 450 156 776 269 1087 377 1380 479 1673 580 HI VEL 681 HI VEL 782 HI VEL 883 HI VEL 1075 HI VEL 1288 639 213 1228 409 1739 580 2209 736 HI VEL 892 HI VEL 1048 HI VEL 1203 HI VEL 1358 HI VEL 1654 HI VEL 1981 1840 842 2673 1224 HI VEL 1601 HI VEL 1940 HI VEL 2279 HI VEL 2617 HI VEL 2955 HI VEL 3598 HI VEL 4309 2092 1162 3449 1916 HI VEL 2504 HI VEL 3123 HI VEL 3667 HI VEL 4211 HI VEL 4755 HI VEL 5790 HI VEL HI VEL 2025 885 2891 1264 3607 1577 4260 1862 HI VEL 2196 HI VEL 2479 HI VEL 3019 HI VEL 3616 2972 1415 4215 2007 5214 2483 6106 2908 HI VEL 3305 HI VEL 4136 HI VEL 4953 3374 1671 4772 2364 5878 2911 6850 3393 HI VEL 4221 HI VEL 5170 2800 1458 5213 2715 6826 3555 9249 4817 HI VEL 5962 4736 2614 6686 3691 9431 5206 11823 6526 7836 5636 11217 8068
20% 378 652 913 1160 1405 1650 1895 2140 2606 3120 490 941 1333 1693 2052 2410 2767 3125 HI VEL HI VEL 1743 2533 3313 4015 4715 HI VEL HI VEL HI VEL HI VEL 2283 3764 4919 6134 HI VEL HI VEL HI VEL HI VEL HI VEL 1795 2562 3196 3775 4452 5026 6121 7331 2873 4074 5041 5903 6708 8396 10055 3342 4727 5822 6786 8441 10340 2917 5430 7111 9634 11924 5134 7248 10223 12816 10067 14410
30% 540 932 1304 1656 2007 2358 2707 3057 HI VEL HI VEL 772 1483 2101 2669 3234 HI VEL HI VEL HI VEL HI VEL HI VEL 2566 3729 4877 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 2964 4886 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 2668 3808 4751 5612 6617 7472 HI VEL HI VEL 4104 5820 7201 8432 9583 HI VEL HI VEL 4695 6640 8179 9532 11858 HI VEL 3908 7276 9528 12909 15979 6725 9494 13392 16789 11604 16610
2-1/2" (DN65) Body Droop 10% 180 311 435 552 669 786 902 1019 1241 1486 266 512 725 920 1115 1310 1504 1698 2068 2477 968 1407 1840 2230 2619 3008 3396 4136 4953 1370 2258 2951 3680 4322 4963 5604 6824 8173 970 1385 1728 2041 2406 2717 3309 3963 1585 2248 2781 3257 3701 4632 5548 1910 2701 3327 3877 4824 5909 1750 3258 4266 5780 7155 3069 4333 6111 7661 6390 9146
20% 408 704 985 1252 1517 1781 2045 2309 2812 3368 596 1146 1623 2061 2498 2934 3369 3804 4632 HI VEL 2033 2955 3865 4684 5501 6317 7132 HI VEL HI VEL 2681 4421 5778 7204 8461 HI VEL HI VEL HI VEL HI VEL 2037 2908 3628 4286 5053 5706 6948 8321 3326 4717 5835 6833 7766 9720 11640 3788 5357 6599 7690 9567 11719 3360 6256 8192 11098 13737 6043 8531 12034 15086 12448 17818
3" (DN80) Body Droop
30% 10% 630 240 1087 414 1522 580 1933 736 2342 892 2750 1048 3158 1203 3566 1358 4343 1654 HI VEL 1981 878 319 1688 614 2391 869 3037 1104 3680 1338 4322 1572 4963 1805 HI VEL 2038 HI VEL 2482 HI VEL 2972 3030 1133 4404 1646 5761 2153 6981 2610 HI VEL 3065 HI VEL 3519 HI VEL 3974 HI VEL 4839 HI VEL 5795 3794 1552 6255 2559 8175 3345 HI VEL 4171 HI VEL 4898 HI VEL 5625 HI VEL 6351 HI VEL 7734 HI VEL 9262 3056 1152 4362 1645 5442 2052 6428 2423 7580 2857 8558 3226 10423 3929 HI VEL 4705 4953 1840 7025 2609 8691 3228 10177 3780 11566 4296 14476 5377 HI VEL 6439 5730 2180 8104 3084 9981 3798 11632 4427 14471 5507 17726 6746 5017 1983 9340 3692 12231 4835 16570 6551 20510 8109 8525 3505 12035 4948 16975 6979 21282 8749 15130 7354 21657 10527
20% 450 776 1087 1380 1673 1965 2256 2547 3102 3715 666 1279 1811 2301 2788 3274 3760 4245 5170 6191 2295 3335 4362 5286 6208 7129 8049 9802 HI VEL 3088 5091 6654 8297 9744 11189 12634 HI VEL HI VEL 2304 3289 4103 4847 5715 6453 7858 9411 3821 5419 6704 7851 8922 11167 13373 4329 6123 7541 8789 10934 13393 3792 7059 9244 12524 15502 6877 9708 13693 17167 14618 20924
30% 720 1242 1739 2209 2676 3143 3609 4075 4963 5944 1012 1944 2753 3497 4238 4977 5715 6453 7858 HI VEL 3534 5136 6718 8141 9561 10979 HI VEL HI VEL HI VEL 4624 7623 9963 12423 HI VEL HI VEL HI VEL HI VEL HI VEL 3480 4968 6198 7321 8633 9747 11870 14215 5732 8129 10056 11776 13384 16751 20060 6573 9297 11450 13345 16602 20335 5985 11143 14591 19769 24469 10514 14843 20936 26247 20344 29121
4" (DN100) Body Droop 10% 300 518 725 920 1115 1310 1504 1698 2068 2477 453 870 1232 1564 1896 2227 2557 2887 3516 4210 1791 2603 3405 4126 4846 5565 6283 7652 9163 2200 3627 4740 5910 6942 7971 9000 10960 13126 1576 2250 2808 3316 3910 4415 5377 6439 2547 3613 4469 5234 5948 7445 8916 2976 4209 5185 6042 7517 9207 2742 5104 6684 9056 11209 4736 6686 9431 11823 10157 14539
20% 660 1139 1594 2025 2453 2881 3309 3736 4550 5448 932 1790 2536 3221 3903 4584 5264 5943 7238 8668 3147 4573 5982 7249 8513 9776 11038 13442 16098 4275 7048 9212 11486 13490 15490 17490 21300 HI VEL 3250 4639 5788 6836 8061 9102 11084 13274 5166 7326 9063 10613 12062 15096 18079 5968 8441 10397 12117 15074 18464 5215 9709 12714 17225 21321 9605 13559 19125 23977 20344 29121
30% 1002 1729 2420 3074 3725 4375 5023 5672 6907 8272 1251 2404 3405 4325 5241 6156 7068 7981 9720 11640 4647 6754 8834 10706 12574 14438 16302 HI VEL HI VEL 6533 10771 14078 17553 20615 23672 HI VEL HI VEL HI VEL 4790 6838 8531 10076 11881 13415 16337 19565 7883 11179 13830 16196 18407 23037 27589 8992 12718 15665 18256 22712 27819 8283 15422 20195 27360 33866 14493 20459 28858 36179 28633 40985
NOTE: Where “Hi Vel” is indicated, the flow has reached or exceeded a velocity of Mach 0.35, an accepted limit for expanded steam on the downstream side. Use of higher velocities normally generate excessive noise levels. METRIC CONVERSION FACTOR: LBS/HR x 0.4536 = KG/HR
10
8310-BASIC-TB
TABLE 15 MODEL 8310 - “LP VARIATION” AIR CAPACITY - SCFH S.G. = 1.0 T = 60°F FL = 0.88 All Sizes - Composition Diaphragm Only Set Point Pressure - P2 psig (Barg)
2
(.14)
5
(.34)
10
(.69)
15
(1.0)
20
(1.4)
25
(1.7)
30
(2.1)
1-1/2" (DN40) Body 2" (DN50) Body Inlet Pressure Droop Droop psig (Barg) 10% 20% 30% 10% 20% 30% 25 (1.7) 21400 32700 33400 28000 45700 50000 50 (3.4) 34900 53300 54400 45600 74500 81500 75 (5.2) 48300 SONIC SONIC 63300 103300 SONIC 100 (6.9) 61800 SONIC SONIC 80900 SONIC SONIC 125 (8.6) SONIC SONIC SONIC 98600 SONIC SONIC 150 (10.3) SONIC SONIC SONIC SONIC SONIC SONIC 25 (1.7) 17800 30000 33400 22900 41900 48400 50 (3.4) 29000 49000 54400 37300 68300 78800 75 (5.2) 40300 67900 75400 51800 94600 109300 100 (6.9) 51500 SONIC SONIC 66200 121000 SONIC 125 (8.6) 62700 SONIC SONIC 80600 SONIC SONIC 150 (10.3) 73900 SONIC SONIC 95100 SONIC SONIC 25 (1.7) 7000 13700 19700 8000 16500 25400 50 (3.4) 11400 22400 32200 13100 27000 41500 75 (5.2) 15800 31100 44600 18100 37400 57500 100 (6.9) 20200 39700 57000 23200 47800 73600 125 (8.6) 24600 48400 69400 28200 58200 89600 150 (10.3) 29000 57000 81900 33300 68700 105600 25 (1.7) 8900 16700 23800 10600 21400 44400 50 (3.4) 15600 29000 41500 18500 37300 77400 75 (5.2) 21600 40300 57500 25600 51800 107300 100 (6.9) 27600 51500 73600 32700 66200 137200 125 (8.6) 33600 62700 89600 39900 80600 167100 150 (10.3) 39600 73900 105600 47000 95100 SONIC 25 (1.7) 9500 26400 22500 11600 22600 31500 50 (3.4) 20700 57500 49100 25300 49300 68500 75 (5.2) 28800 80000 68200 35100 68500 95200 100 (6.9) 36800 102300 87200 44900 87500 121700 125 (8.6) 44800 124500 106200 54700 106600 148300 150 (10.3) 52800 SONIC 125200 64400 125700 174800 50 (3.4) 27000 45300 53200 34300 63300 75500 75 (5.2) 38300 64100 75400 48600 89700 107000 100 (6.9) 48900 82000 96400 62200 114800 136800 125 (8.6) 59600 99900 117400 75700 139800 166700 150 (10.3) 70200 117800 138400 89300 164800 196500 50 (3.4) 34000 50100 50800 45600 70800 76300 75 (5.2) 50200 74000 75200 67400 104700 112800 100 (6.9) 64400 94900 96400 86400 134300 144600 125 (8.6) 78400 115600 117400 105300 163500 176100 150 (10.3) 92400 136300 138400 124100 192800 207600
2-1/2" (DN65) Body Droop 10% 20% 30% 32200 58800 67200 52500 95900 109500 72800 132900 151900 93100 SONIC SONIC 113300 SONIC SONIC 133600 SONIC SONIC 26900 52500 63700 43800 85500 103700 60700 118500 143800 77600 151500 SONIC 94500 SONIC SONIC 111400 SONIC SONIC 9900 19400 28800 16200 31700 47100 22400 44000 65300 28700 56300 83500 34900 68500 101700 41200 80800 119900 12500 25200 38500 21800 44000 67000 30200 61000 92900 38600 78000 118800 47000 95000 144700 55500 112000 170600 13100 26400 39800 28600 57500 86700 39700 80000 120500 50800 102300 154100 61800 124500 187700 72900 146800 221300 40000 76700 98000 56700 108700 138900 72500 139000 177700 88300 169300 216400 104000 199600 255100 52800 91800 104000 78100 135700 153800 100000 174000 197200 121900 211900 240100 143700 249800 283100
3" (DN80) Body Droop 10% 20% 30% 36900 74300 93200 60200 121200 151900 83400 168000 210600 106700 214800 SONIC 129900 SONIC SONIC 153200 SONIC SONIC 30600 60700 85300 49800 99000 139000 69000 137200 192700 88300 175400 246400 107500 213700 SONIC 126800 251900 SONIC 11200 34800 33500 18300 56800 54800 25300 78800 75900 32400 100800 97100 39400 122700 118300 46500 144700 139400 14500 28800 43800 25300 50200 76400 35100 69600 105900 44900 89000 135400 54700 108400 164900 64400 127800 194400 15400 30600 46400 33500 66700 101000 46600 92600 140400 59600 118400 179500 72600 144300 218600 85600 170100 257700 45700 88700 109000 64700 125700 154500 82800 160700 197500 100800 195800 240600 118800 230800 283600 61500 118900 145500 91000 175900 215200 116600 225500 275900 142000 274600 336000 167400 323800 396100
4" (DN100) Body Droop 10% 20% 30% 51600 103400 126000 84000 168500 205400 116500 233600 284800 149000 298700 364100 181400 363800 SONIC 213900 SONIC SONIC 42100 84700 120200 68700 138000 195900 95200 191300 271500 121700 244600 347200 148300 297900 422900 174800 351200 SONIC 15500 30400 46400 25300 49600 75700 35100 68700 105000 44900 87900 134300 54700 107100 163500 64400 126200 192800 20100 39500 60400 35100 68900 105200 48600 95500 145800 62200 122100 186500 75700 148700 227100 89300 175300 267800 21100 42100 64500 46000 91700 140600 63900 127400 195300 81700 162900 249700 99500 198500 304200 117300 234000 358600 63300 122400 183700 89700 173500 260300 114800 221800 332900 139800 270100 405400 164800 318500 478000 84000 167100 193600 124300 247100 286400 159300 316700 367100 194000 385700 447100 228700 454700 527100
NOTE: Where "SONIC" is indicated within the above capacity tables, outlet velocity with Schedule 40 pipe has reached sonic velocity of 1118 fps. Additional flow cannot be obtained, and pipeline velocity is in excess of customary pipe velocity design limits. Flow will be approximately the last indicated value in the column above "SONIC". METRIC CONVERSION FACTORS: SCFH ÷ 35.31 = Sm3/HR SCFH ÷ 37.32 = Nm3/HR
8310-BASIC-TB
11
TABLE 16 MODEL 8310 - “LP VARIATION” STEAM CAPACITY - LBS/HR S.G. = Actual T = Saturated FL = 0.88 All Sizes - Metal Diaphragm Set Point Pressure - P2 psig (Barg)
5
(.34)
10
(.69)
15
(1.0)
20
(1.4)
25
(1.7)
30
(2.1)
Inlet Pressure psig (Barg) 10 (.69) 25 (1.7) 50 (3.4) 75 (5.2) 100 (6.9) 125 (8.6) 150 (10.3) 175 (12.1) 200 (13.8) 250 (17.2) 300 (20.7) 25 (1.7) 50 (3.4) 75 (5.2) 100 (6.9) 125 (8.6) 150 (10.3) 175 (12.1) 200 (13.8) 250 (17.2) 300 (20.7) 25 (1.7) 50 (3.4) 75 (5.2) 100 (6.9) 125 (8.6) 150 (10.3) 175 (12.1) 200 (13.8) 250 (17.2) 300 (20.7) 25 (1.7) 50 (3.4) 75 (5.2) 100 (6.9) 125 (8.6) 150 (10.3) 175 (12.1) 200 (13.8) 250 (17.2) 300 (20.7) 50 (3.4) 75 (5.2) 100 (6.9) 125 (8.6) 150 (10.3) 175 (12.1) 200 (13.8) 250 (17.2) 300 (20.7) 50 (3.4) 75 (5.2) 100 (6.9) 125 (8.6) 150 (10.3) 175 (12.1) 200 (13.8) 250 (17.2) 300 (20.7)
1-1/2" DN40) Body Droop 10% 20% 30% 262 466 694 539 957 1425 897 HI VEL HI VEL 1231 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 174 336 601 300 579 1034 420 811 1448 534 1031 1842 647 1250 HI VEL 759 1466 HI VEL 872 1684 HI VEL 974 1880 HI VEL 1210 HI VEL HI VEL 1436 HI VEL HI VEL 224 437 666 429 838 1278 608 1188 1811 774 1510 2302 937 1830 HI VEL 1100 2147 HI VEL 1263 HI VEL HI VEL 1410 HI VEL HI VEL 1753 HI VEL HI VEL 2080 HI VEL HI VEL 248 468 655 612 1153 1615 863 1626 2277 1124 2118 HI VEL 1361 2567 HI VEL 1597 HI VEL HI VEL 1835 HI VEL HI VEL 2048 HI VEL HI VEL 2546 HI VEL HI VEL HI VEL HI VEL HI VEL 783 1422 2099 1139 2067 HI VEL 1492 2708 HI VEL 1808 HI VEL HI VEL 2121 HI VEL HI VEL 2436 HI VEL HI VEL 2720 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 993 1659 2142 1518 2534 3273 1956 3266 HI VEL 2433 HI VEL HI VEL 2854 HI VEL HI VEL 3279 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL
2" (DN50) Body Droop 10% 20% 30% 315 608 922 646 1248 1894 1076 2078 HI VEL 1477 HI VEL HI VEL 1879 HI VEL HI VEL 2276 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 198 402 721 341 693 1241 478 970 1738 608 1234 2210 736 1495 2678 864 1754 3142 993 2015 HI VEL 1108 2250 HI VEL 1377 2796 HI VEL 1635 HI VEL HI VEL 256 533 853 491 1022 1635 695 1448 2317 884 1842 2947 1071 2232 3571 1257 2618 HI VEL 1444 3008 HI VEL 1612 3358 HI VEL 2003 HI VEL HI VEL 2378 HI VEL HI VEL 289 574 891 712 1414 2196 1004 1994 3097 1308 2597 4034 1585 3147 HI VEL 1859 3691 HI VEL 2136 4241 HI VEL 2384 HI VEL HI VEL 2963 HI VEL HI VEL 3517 HI VEL HI VEL 948 1809 2911 1378 2630 4233 1805 3444 HI VEL 2187 4173 HI VEL 2566 4896 HI VEL 2948 HI VEL HI VEL 3290 HI VEL HI VEL 4090 HI VEL HI VEL 4854 HI VEL HI VEL 1203 2287 2971 1838 3495 4540 2368 4504 HI VEL 2946 5602 HI VEL 3456 HI VEL HI VEL 3970 HI VEL HI VEL 4432 HI VEL HI VEL 5509 HI VEL HI VEL HI VEL HI VEL HI VEL
2-1/2" (DN65) Body 3" (DN80) Body 4" (DN100) Body Droop Droop Droop 10% 20% 30% 10% 20% 30% 10% 20% 30% 370 706 1156 429 805 1329 586 1113 1844 760 1451 2376 881 1654 2731 1204 2287 3789 1266 2416 HI VEL 1466 2753 4546 2004 3808 6308 1738 3317 HI VEL 2013 3780 HI VEL 2752 5229 8661 2210 HI VEL HI VEL 2560 4807 HI VEL 3500 6649 HI VEL 2678 HI VEL HI VEL 3102 HI VEL HI VEL 4240 8057 HI VEL 3142 HI VEL HI VEL 3639 HI VEL HI VEL 4974 9451 HI VEL HI VEL HI VEL HI VEL 4181 HI VEL HI VEL 5715 HI VEL HI VEL HI VEL HI VEL HI VEL 4667 HI VEL HI VEL 6379 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 7930 HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL HI VEL 9411 HI VEL HI VEL 234 451 793 276 523 961 378 721 1304 403 776 1365 476 900 1655 652 1241 2244 565 1086 1912 666 1260 2317 912 1738 3143 718 1381 2431 847 1602 2947 1160 2210 3997 870 1674 2946 1027 1942 3571 1406 2678 4843 1021 1964 3456 1204 2278 4189 1649 3142 5681 1173 2256 3970 1384 2617 4813 1895 3609 6527 1309 2518 HI VEL 1544 2921 5372 2115 4029 7286 1628 3130 HI VEL 1920 3631 6678 2629 5008 9057 1932 3715 HI VEL 2278 4309 HI VEL 3120 5944 10748 293 613 959 362 704 1119 432 954 1519 562 1175 1840 695 1349 2146 828 1829 2913 797 1666 2607 985 1912 3042 1173 2593 4128 1013 2118 3315 1252 2431 3868 1492 3297 5249 1227 2567 4017 1518 2946 4687 1808 3995 6361 1440 3011 4712 1780 3456 5498 2121 4686 7461 1654 3459 HI VEL 2045 3970 6317 2436 5384 8572 1847 3861 HI VEL 2283 4432 7051 2720 6010 9569 2295 4800 HI VEL 2838 5509 HI VEL 3381 7471 11895 2724 HI VEL HI VEL 3368 6538 HI VEL 4012 8866 14116 330 671 1038 387 773 1180 533 1074 1656 812 1655 2557 953 1905 2908 1314 2648 4082 1146 2334 3606 1344 2687 4101 1853 3734 5756 1492 3039 4697 1750 3500 5342 2413 4863 7497 1808 3682 5691 2120 4240 6472 2924 5892 9083 2121 4320 HI VEL 2487 4974 7592 3430 6912 10655 2436 4963 HI VEL 2857 5715 8723 3940 7941 12242 2720 5540 HI VEL 3190 6379 HI VEL 4398 8864 13665 3381 HI VEL HI VEL 3965 7930 HI VEL 5467 11018 HI VEL 4012 HI VEL HI VEL 4705 9411 HI VEL 6489 13076 HI VEL 1122 2128 3482 1277 2418 4101 1741 2902 5561 1631 3094 5063 1856 3516 5963 2531 4219 8087 2137 4052 6631 2431 4605 7810 3315 5526 10591 2589 4910 HI VEL 2946 5580 9463 4017 6695 12833 3037 5760 HI VEL 3456 6545 11101 4712 7854 15054 3489 6617 HI VEL 3970 7520 HI VEL 5414 9024 17295 3895 HI VEL HI VEL 4432 8394 HI VEL 6044 10073 HI VEL 4841 HI VEL HI VEL 5509 10434 HI VEL 7512 12521 HI VEL 5746 HI VEL HI VEL 6538 HI VEL HI VEL 8916 14859 HI VEL 1413 2661 3737 1631 3053 4265 2233 4183 5924 2158 4066 5710 2493 4665 6517 3412 6392 9052 2781 5239 7357 3212 6011 8397 4396 8236 11663 3459 6517 HI VEL 3995 7477 10445 5468 10244 14507 4058 7645 HI VEL 4686 8770 12252 6414 12017 17017 4662 HI VEL HI VEL 5384 10076 HI VEL 7369 13806 19551 5204 HI VEL HI VEL 6010 11248 HI VEL 8226 15411 HI VEL 6469 HI VEL HI VEL 7471 HI VEL HI VEL 10225 19157 HI VEL 7677 HI VEL HI VEL 8866 HI VEL HI VEL 12135 HI VEL HI VEL
NOTE: Where "HI VEL" is indicated, the flow has reached or exceeded a velocity of Mach 0.35, an accepted limit for expanded steam on the downstream side. Use of higher velocities normally generate excessive noise levels. METRIC CONVERSION FACTOR: LBS/HR x 0.4536 = KG/HR
12
8310-BASIC-TB
DIMENSIONS AND WEIGHTS – ENGLISH UNITS Dimensions - inches Size Inches
End Conn
A
C
B “LP”
1-1/2" *
2" **
2-1/2" 3" 4"
D
E
F
G
H
I
J
“LP”
“HP”
121
100
127
106
9.25
135
114
4.25
9.26
161
140
125/150# Flgd.
4.62
10.00
173
152
250/300# Flgd.
4.88
10.50
177
156
125/150# Flgd.
5.06
10.88
201
180
250/300# Flgd.
5.38
11.50
206
185
125/150# Flgd.
5.50
11.75
226
205
250/300# Flgd.
5.88
12.50
234
213
125/150# Flgd.
6.56
13.88
251
230
250/300# Flgd.
6.88
14.50
269
248
NPT
3.69
8.00
125/150# Flgd.
4.06
8.75
250/300# Flgd.
4.31
NPT
14.00
14.00
14.00 14.00 14.00
“HP”
Approximate Ship Weight lbs.
11.25
4.75
11.25
6.89
6.38
11.25
8.44
6.38
11.25
12.75
10.94
23.50
22.75
9.81
10.94
22.00
22.75
14.00
8.00
22.00
21.50
14.00
9.74
20.50
21.50
12.69
9.74
7.69
20.25
12.69
8.44
7.69
11.25
11.12
12.75
11.25
23.50
13.06
11.25
13.06
* 1-1/2" Size CS body material with Opt-34: "A" dim. = 7.31" & "B" dim = 14.00" ** 2" Size CS body material with Opt-34: "A" dim. = 7.38" & "B" dim = 14.00"
Option -20 Air Pressure Loaded
DIMENSIONS AND WEIGHTS – METRIC UNITS Size (DN)
(40) *
(50) **
(65) (80) (100)
Dimensions (mm)
Approximate Ship Weight (kg)
End Conn
A
B
NPT
94
203
125/150# Flgd.
103
222
250/300# Flgd.
110
235
61.23
51.70
NPT
108
235
73.02
63.49
125/150# Flgd.
117
254
78.46
58.94
250/300# Flgd.
124
267
80.27
70.75
125/150# Flgd.
129
276
91.16
81.63
250/300# Flgd.
137
292
125/150# Flgd.
140
298
250/300# Flgd.
149
318
125/150# Flgd.
167
352
250/300# Flgd.
175
368
C “LP” 356
356
356 356 356
“HP” 286
286
286 286 286
D
121
162
162 195 195
E
175
214
214 247 247
F
283
322
322 356 356
G
514
546
546 578 578
H
521
559
559 597 597
I
203
278
278 286 286
J
249
324
324 332 332
“LP”
“HP”
54.88
45.35
57.60
48.07
93.42
83.90
102.50
92.97
106.12
96.60
113.83
104.31
122.00
112.47
* DN40 Size CS body material with Opt-34: "A" dim. = 185mm & "B" dim = 356mm. ** DN50 Size CS body material with Opt-34: "A" dim. = 187mm & "B" dim = 356mm.
8310-BASIC-TB
13
NOTES
14
8310-BASIC-TB
MODEL 8310LP PRODUCT CODE
5B
Table 1
Table 3
Table 2
Size (DN)
Table 6
Table 5
TABLE 2 - BODY / SPRING CHAMBER MATERIAL
TABLE 1 - SIZE
in
Table 4
CODE
1-1/2"
(40)
8
2"
(50)
9
2-1/2" *
(65)
A
3" *
(80)
B
4" *
(100)
C
Body / Sp. Ch.
CODE
CI/CI
1
CS/CS
5
TABLE 3 - TRIM Desig.
CODE
S1
S1
S5
S5
S40
40
NOTE: See TB Table 2 for material limitations of Design Pressure Ratings.
TABLE 6 - RANGE SPRINGS
Description
CODE
NPT - Screwed
1
-30 Opt. Integral Flanged 125 LB Flgs CI Only
3
150 LB Flgs CS Only
6
250 LB Flgs CI Only
5
Dimension (Sizes 1-1/2" & 2" only) * -34 Opt. - 300 LB RF Flgs. 14" F to F Dimension (Sizes 1-1/2" & 2" only) *
7 V
W
* CS body material only. Nipples & flanges of same material as body.
8310-BASIC-TB
Table 7
Table 7
C
Table 7
TABLE 4 - Product Classification Under European "Pressure Equipment Directive" PRODUCT DESTINATION
HAZARD CATEGORY
CODE
Anywhere except Europe
N/A
7
Sound Engineering Practice (SEP)
S
CE Marked Hazard Cat I or II
E
* For products to be placed in service in Europe - Ref to Directive 97/23/EC. Forward Completed "EU" Application Recorder prior to quotation. (Without Recorder- Processing of Purchase Order will be delayed). Contact Cashco for Assistance.
TABLE 5 - END CONNECTIONS
-34 Opt. - 150 LB RF Flgs. 14" F to F
Table 7
European Countries *
* Flanged Only.
300 LB Flgs CS Only
Table 7
Table 7
Steel Range Spring psig
(Barg)
1-4*
(.07-.27)
3 - 10 8 - 30
Option
CODE
No Option
---
0
5
Closing Cap
-1
1
6
T-Bar & Locking Lever
-3
3
7
Stellited Seat Surfaces - S1 and S5 Trim Only
-15
A
Special Cleaning: Per Cashco Spec #S-1542.. . Epoxy Painted Per Cashco Spec #S-1547
-56
N
-95
W
Epoxy Painted Per Cashco Spec #S-1687 Offshore
-95OS
Y
CODE
(.21-.69) (.55-2.1)
* Composition Diaphragm Only.
TABLE 7 - OPTIONS Description
For Special Construction Other Than Above Contact Cashco for Special Product Code
1. NUMERIC digits assigned first in “ascending” order. 2. ALPHA designations are assigned second in “alphabetical” order. 3. Left justify. 4. Add “0” to all unused squares. 5. If insufficient quantity of squares, consult factory for proper code.
15
MODEL 8310HP PRODUCT CODE
7B
Table 1
Table 3
Table 2
TABLE 1 - SIZE Size (DN)
in
Table 4
Table 5
TABLE 2 - BODY / SPRING CHAMBER MATERIAL
CODE
1-1/2"
(40)
8
2"
(50)
9
2-1/2" *
(65)
A
3" *
(80)
B
4" *
(100)
C
Body / Sp. Ch.
CODE
CI/DI
1
CS/CS
5
09/23/13
Table 6
Desig.
CODE
S1
S1
S5
S5
S40
40
NOTE: See TB Table 1 for material limitations of Design Pressure Ratings.
CODE
NPT - Screwed
1
-30 Opt. Integral Flanged 125 LB Flgs CI Only
3
150 LB Flgs CS Only 250 LB Flgs CI Only 300 LB Flgs CS Only
7
Dimension (Sizes 1-1/2" & 2" only) *
Table 7
C
Table 7
TABLE 4 - Product Classification Under European "Pressure Equipment Directive" PRODUCT DESTINATION
HAZARD CATEGORY
CODE
Anywhere except Europe
N/A
7
Sound Engineering Practice (SEP)
S
CE Marked Hazard Cat I or II
E
Steel Range Spring psig
(Barg)
10 - 40
(.69-2.8)
TABLE 7 - OPTIONS Description
Option
CODE
No Option
---
0
1
Closing Cap
-1
1
8
T-Bar & Locking Lever
-3
3
CODE
30 - 100
(2.1-6.9)
6
75 - 145
(5.2-10.0)
9
Stellited Seat Surfaces - S1 and S5 Trim Only
-15
A
5
130 - 200 *
(9.0-13.8)
B
Special Cleaning: Per Cashco Spec #S-1542. . High Pressure Spring Chamber
-56
N
-80
U
Epoxy Painted Per Cashco Spec #S-1547
-95
W
Epoxy Painted Per Cashco Spec #S-1687 Offshore
-95OS
Y
V
W
* CS body material only. Nipples & flanges of same material as body.
Cashco, Inc. P.O. Box 6 Ellsworth, KS 67439-0006 PH: (785) 472-4461 Fax: (785) 472-3539 www.cashco.com E-mail: [email protected] [email protected] Printed in U.S.A. Model 8310-TB
Table 7
European Countries *
TABLE 6 - RANGE SPRINGS
Description
-34 Opt. - 300 LB RF Flgs. 14" F to F
Table 7
* For products to be placed in service in Europe - Ref to Directive 97/23/EC. Forward Completed "EU" Application Recorder prior to quotation. (Without Recorder- Processing of Purchase Order will be delayed). Contact Cashco for Assistance.
TABLE 5 - END CONNECTIONS
Dimension (Sizes 1-1/2" & 2" only) *
Table 7
TABLE 3 - TRIM
* Flanged Only.
-34 Opt. - 150 LB RF Flgs. 14" F to F
Table 7
Option-20 Dome Loaded
* Utiliize with Opt -80.
A
Must specify in Table 7.
For Special Construction Other Than Above Contact Cashco for Special Product Code
1. NUMERIC digits assigned first in “ascending” order. 2. ALPHA designations are assigned second in “alphabetical” order. 3. Left justify. 4. Add “0” to all unused squares. 5. If insufficient quantity of squares, consult factory for proper code.
