Petzl E03 050 Headlamp Battery Replacement
Petzl E03 050 Headlamp Battery Replacement
Petzl E03 050 Headlamp Battery Replacement This guide will explain the steps necessary to replace the batteries for a Petzl E03 050 headlamp.
Written By: Mike
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Petzl E03 050 Headlamp Battery Replacement
INTRODUCTION Is your headlamp not turning on? You may need to replace the batteries.
PARTS: AA Batteries (2)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Petzl E03 050 Headlamp Battery Replacement
Step 1 — Remove the Cover
Remove the back cover of the battery housing (found behind the mount assembly) by pulling the small tab on the bottom right corner.
Remove the old batteries by pulling outward the positive end of each battery.
Step 2 — Remove the Old Batteries
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Petzl E03 050 Headlamp Battery Replacement
Step 3 — Insert the New Batteries
Insert the new batteries by inserting the negative end of the battery into the negative side of the battery compartment and pushing the positive end of the battery into the positive side of battery compartment.
Reattach the back cover of the battery housing by pushing in the bottom half and then pressing the rest of the cover into place.
Step 4 — Reattach the Cover
This document was last generated on 2017-07-25 06:39:16 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Petzl E03 050 Headlamp Battery Replacement This guide will explain the steps necessary to replace the batteries for a Petzl E03 050 headlamp.
Written By: Mike
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Petzl E03 050 Headlamp Battery Replacement
INTRODUCTION Is your headlamp not turning on? You may need to replace the batteries.
PARTS: AA Batteries (2)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Petzl E03 050 Headlamp Battery Replacement
Step 1 — Remove the Cover
Remove the back cover of the battery housing (found behind the mount assembly) by pulling the small tab on the bottom right corner.
Remove the old batteries by pulling outward the positive end of each battery.
Step 2 — Remove the Old Batteries
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Petzl E03 050 Headlamp Battery Replacement
Step 3 — Insert the New Batteries
Insert the new batteries by inserting the negative end of the battery into the negative side of the battery compartment and pushing the positive end of the battery into the positive side of battery compartment.
Reattach the back cover of the battery housing by pushing in the bottom half and then pressing the rest of the cover into place.
Step 4 — Reattach the Cover
This document was last generated on 2017-07-25 06:39:16 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
