Polycom SoundStation Internal Keyboard Replacement
Polycom SoundStation Internal Keyboard Replacement
Polycom SoundStation Internal Keyboard Replacement Follow this guide to replace the internal keyboard for your SoundStation.
Written By: Cali Nowak Credit
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Polycom SoundStation Internal Keyboard Replacement
INTRODUCTION Being able to remove the keyboard will allow you to replace it or clean up the connections if the keyboard is not working properly.
TOOLS: Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Polycom SoundStation Internal Keyboard Replacement
Step 1 — Back Housing
Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.
Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.
Step 2
Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Polycom SoundStation Internal Keyboard Replacement
Step 3 — Internal Keyboard
Gently lift the internal keyboard off of the motherboard.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-29 12:02:12 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Polycom SoundStation Internal Keyboard Replacement Follow this guide to replace the internal keyboard for your SoundStation.
Written By: Cali Nowak Credit
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Polycom SoundStation Internal Keyboard Replacement
INTRODUCTION Being able to remove the keyboard will allow you to replace it or clean up the connections if the keyboard is not working properly.
TOOLS: Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Polycom SoundStation Internal Keyboard Replacement
Step 1 — Back Housing
Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.
Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.
Step 2
Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Polycom SoundStation Internal Keyboard Replacement
Step 3 — Internal Keyboard
Gently lift the internal keyboard off of the motherboard.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-29 12:02:12 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
