Mitsubishi T200 Keyboard Replacement

Mitsubishi T200 Keyboard Replacement

Mitsubishi T200 Keyboard Replacement How to replace the rubber keyboard on a T200 phone.

Written By: Katherine

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Mitsubishi T200 Keyboard Replacement

INTRODUCTION This short, simple guide will help you replace the rubber keyboard buttons on a Mitsubishi T200 cellphone.

TOOLS:

PARTS:

Small Phillips Head Screwdriver (1)

New Rubber Button Keypad for Mitsubishi T200 (1)

small flat head screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Mitsubishi T200 Keyboard Replacement

Step 1 — Keyboard 

Begin disassembling the phone by removing the back of the phone and the battery.



Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Mitsubishi T200 Keyboard Replacement

Step 3 

Pry the font plastic component from the “motherboard” component.



Take out the old rubber keypad and replace with a new one.

Step 4

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Mitsubishi T200 Keyboard Replacement

Step 5 

Reassemble by following previous steps in reverse order.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-16 09:53:21 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5