Primary lithium battery LO 40 SX - Microbattery.com
Primary lithium battery LO 40 SX 3.0 V Primary lithium-sulfur dioxide (Li-SO2) High drain capability 2 /3 “Thin” D-size spiral cell
Benefits
• High and stable discharge voltage • High pulse capability • Performance not affected by cell orientation • Long storage possible before use • Ability to withstand extreme temperature Key features
• Low self-discharge rate
(less than 3 % after 1 year of storage at + 20ºC) • Hermetic glass-to-metal sealing • Built-in safety vent (at the negative end of the cell) • UL Component Recognition (File Number MH 15076) • Meets shock, vibration and other environmental requirements of military specifications • Restricted for transport (Class 9) • Made in the USA
Cell size reference
2/3
“Thin” D
Electrical characteristics (typical values for cells stored for one year or less) Nominal capacity (under 120 mA + 20ºC 2.0 V cut-off. The capacity restored by the cell varies according to current drain, temperature and cut-off)
3.50 Ah
Open circuit voltage (at + 20ºC)
3.0 V
Nominal voltage
2.8 V
(at 120 mA + 20ºC)
Maximum recommended continuous current (to avoid over-heating. Higher currents possible, consult Saft)
2.0 A
Pulse capability: Typically up to 5 A. (The voltage readings may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft) Storage (recommended) (possible without leakage) Operating temperature range (Short excursions up to + 85ºC possible at currents below 1 A)
+ 30ºC (+ 86ºF) max. - 60ºC/+ 85ºC (- 76ºF/+185ºF) - 60ºC/+ 70ºC (- 76ºF/+158ºF)
Physical characteristics Diameter (max)
28.95 mm (1.140 in)
Height (max; finish without radial tabs)
42.29 mm (1.665 in)
Main applications
Typical weight
40 g (1.41 oz)
• Radiocommunications and other
Li metal content
1.2 g
military applications • Automotive telematics
Standard cell comes with resin potting in the topshell area and two radial 0.15 mm - thick nickel tabs Other configurations available on request.
July 2008
LO 40 SX
Voltage plateau versus Current and Temperature 2.9 2.8 + 54ºC + 21ºC
+ 22.9 mm (0.9 in)
Cell voltage (V)
2.7 2.6
0ºC
2.5 - 20ºC
2.4
- 30ºC - 40ºC
2.3
40.89 ± 1.4 mm (1 .610 ± 0.055 in)
2.2 10
100
1000
10000
Current (mA)
_
Typical discharge profiles at + 20ºC 3.0
28.70 ± 0.25 mm (1.130 ± 0.010 in)
2.8
Cell voltage (V)
4.75 mm (0.187 in)
Overall dimensions
2.6 0.1 A
2.4
0. 25 A 0.5 A
2.2
1 A 2 A
2.0 1.8 0
0.5
1
1.5
2
3
2.5
3.5
4
Capacity (Ah)
Handling precautions Restored Capacity versus Current and Temperature (2.0 V cut-off) 4.0 3.5 3.0
Capacity (Ah)
• Cell is pressurised at ambient temperature. • Do not puncture, open or mutilate. • Do not obstruct the safety vent mechanism. • Do not short circuit or charge. • Do not expose to fire or temperatures above + 70 ºC (+158 ºF).
+ 21ºC + 54ºC
2.5
0ºC 2.0 - 20ºC 1.5
- 30ºC - 40ºC
1.0 10
10000
1000
100
Current (mA)
Distributed by: MICROBATTERY.COM ,7350 NW 35th Terrace, Miami, Florida 33122
Customer Service: 1-866-999-2355 | Phone 1-305-371-9200 | FAX 1-305-371-9400 www.microbattery.com
Doc. Nº 31088-2- 0708 Information in this document is subject to change without notice and becomes contractual only after written confirmation by Saft. For more details on primary lithium technologies please refer to Primary Lithium Batteries Selector Guide Doc Nº 31048-2. Published by the Communications Department. Photo credit: Saft. Société anonyme au capital de 31 944 000 RCS Bobigny B 383 703 873 Produced by Arthur Associates Limited.
Benefits
• High and stable discharge voltage • High pulse capability • Performance not affected by cell orientation • Long storage possible before use • Ability to withstand extreme temperature Key features
• Low self-discharge rate
(less than 3 % after 1 year of storage at + 20ºC) • Hermetic glass-to-metal sealing • Built-in safety vent (at the negative end of the cell) • UL Component Recognition (File Number MH 15076) • Meets shock, vibration and other environmental requirements of military specifications • Restricted for transport (Class 9) • Made in the USA
Cell size reference
2/3
“Thin” D
Electrical characteristics (typical values for cells stored for one year or less) Nominal capacity (under 120 mA + 20ºC 2.0 V cut-off. The capacity restored by the cell varies according to current drain, temperature and cut-off)
3.50 Ah
Open circuit voltage (at + 20ºC)
3.0 V
Nominal voltage
2.8 V
(at 120 mA + 20ºC)
Maximum recommended continuous current (to avoid over-heating. Higher currents possible, consult Saft)
2.0 A
Pulse capability: Typically up to 5 A. (The voltage readings may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft) Storage (recommended) (possible without leakage) Operating temperature range (Short excursions up to + 85ºC possible at currents below 1 A)
+ 30ºC (+ 86ºF) max. - 60ºC/+ 85ºC (- 76ºF/+185ºF) - 60ºC/+ 70ºC (- 76ºF/+158ºF)
Physical characteristics Diameter (max)
28.95 mm (1.140 in)
Height (max; finish without radial tabs)
42.29 mm (1.665 in)
Main applications
Typical weight
40 g (1.41 oz)
• Radiocommunications and other
Li metal content
1.2 g
military applications • Automotive telematics
Standard cell comes with resin potting in the topshell area and two radial 0.15 mm - thick nickel tabs Other configurations available on request.
July 2008
LO 40 SX
Voltage plateau versus Current and Temperature 2.9 2.8 + 54ºC + 21ºC
+ 22.9 mm (0.9 in)
Cell voltage (V)
2.7 2.6
0ºC
2.5 - 20ºC
2.4
- 30ºC - 40ºC
2.3
40.89 ± 1.4 mm (1 .610 ± 0.055 in)
2.2 10
100
1000
10000
Current (mA)
_
Typical discharge profiles at + 20ºC 3.0
28.70 ± 0.25 mm (1.130 ± 0.010 in)
2.8
Cell voltage (V)
4.75 mm (0.187 in)
Overall dimensions
2.6 0.1 A
2.4
0. 25 A 0.5 A
2.2
1 A 2 A
2.0 1.8 0
0.5
1
1.5
2
3
2.5
3.5
4
Capacity (Ah)
Handling precautions Restored Capacity versus Current and Temperature (2.0 V cut-off) 4.0 3.5 3.0
Capacity (Ah)
• Cell is pressurised at ambient temperature. • Do not puncture, open or mutilate. • Do not obstruct the safety vent mechanism. • Do not short circuit or charge. • Do not expose to fire or temperatures above + 70 ºC (+158 ºF).
+ 21ºC + 54ºC
2.5
0ºC 2.0 - 20ºC 1.5
- 30ºC - 40ºC
1.0 10
10000
1000
100
Current (mA)
Distributed by: MICROBATTERY.COM ,7350 NW 35th Terrace, Miami, Florida 33122
Customer Service: 1-866-999-2355 | Phone 1-305-371-9200 | FAX 1-305-371-9400 www.microbattery.com
Doc. Nº 31088-2- 0708 Information in this document is subject to change without notice and becomes contractual only after written confirmation by Saft. For more details on primary lithium technologies please refer to Primary Lithium Batteries Selector Guide Doc Nº 31048-2. Published by the Communications Department. Photo credit: Saft. Société anonyme au capital de 31 944 000 RCS Bobigny B 383 703 873 Produced by Arthur Associates Limited.
