Razer Tiamat 7.1 Cable

Razer Tiamat 7.1 Cable

Razer Tiamat 7.1 Cable I added a wire strip on audio cable inside controller before it got lose.

Written By: Waqas Imtiaz

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Razer Tiamat 7.1 Cable

INTRODUCTION How to open up the controller. Add a wire strip to make sure that cable stays in place.

TOOLS: Jimmy (1) 64 Bit Driver Kit (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Razer Tiamat 7.1 Cable

Step 1 — Cable strain relief 

The problem.



There is a thin layer on top, glued with adhesive tape.



Use jimmy to slowly cut the adhesive and release the layer.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Razer Tiamat 7.1 Cable

Step 3 

Open 6 screws



Inside.

Step 4

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Razer Tiamat 7.1 Cable

Step 5 

Added a wire strip.

This document was last generated on 2017-06-21 09:12:41 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5