RCA CC310 Onboard Microphone Replacement
RCA CC310 Onboard Microphone Replacement
RCA CC310 Onboard Microphone Replacement Replace the onboard microphone in the RCA CC310 camcorder.
Written By: Oliver Adams
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
RCA CC310 Onboard Microphone Replacement
INTRODUCTION This guide will instruct you to replace the onboard microphone if it is faulty.
TOOLS:
PARTS:
Phillips #0 Screwdriver (1)
Microphone (1)
Soldering Station (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
RCA CC310 Onboard Microphone Replacement
Step 1 — Onboard Microphone
Lift the metal flap and slide the viewfinder off to the right.
Step 2
Unscrew the 7.0mm ph#0 screw on the underside where the cable connects.
Lift the plastic where the cable is connected to the viewfinder.
Disconnect the cable inside by pulling it apart.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
RCA CC310 Onboard Microphone Replacement
Step 3
Unscrew the two 7mm ph#0 screws on the underside of the viewfinder assembly.
Lift the viewfinder plastic assembly up.
Step 4
Lift the microphone circuit board straight up.
Unclip the cable connected to the circuit board.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
RCA CC310 Onboard Microphone Replacement
Step 5
Turn the microphone circuit board over.
Unscrew the two Ph#0 screws holding the plastic housing on the circuit board.
Desolder the metal protective housing using a soldering iron.
Desolder the microphone and replace it.
Step 6
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 01:30:33 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
RCA CC310 Onboard Microphone Replacement Replace the onboard microphone in the RCA CC310 camcorder.
Written By: Oliver Adams
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
RCA CC310 Onboard Microphone Replacement
INTRODUCTION This guide will instruct you to replace the onboard microphone if it is faulty.
TOOLS:
PARTS:
Phillips #0 Screwdriver (1)
Microphone (1)
Soldering Station (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
RCA CC310 Onboard Microphone Replacement
Step 1 — Onboard Microphone
Lift the metal flap and slide the viewfinder off to the right.
Step 2
Unscrew the 7.0mm ph#0 screw on the underside where the cable connects.
Lift the plastic where the cable is connected to the viewfinder.
Disconnect the cable inside by pulling it apart.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
RCA CC310 Onboard Microphone Replacement
Step 3
Unscrew the two 7mm ph#0 screws on the underside of the viewfinder assembly.
Lift the viewfinder plastic assembly up.
Step 4
Lift the microphone circuit board straight up.
Unclip the cable connected to the circuit board.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
RCA CC310 Onboard Microphone Replacement
Step 5
Turn the microphone circuit board over.
Unscrew the two Ph#0 screws holding the plastic housing on the circuit board.
Desolder the metal protective housing using a soldering iron.
Desolder the microphone and replace it.
Step 6
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 01:30:33 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
