Repairing Black Display on an Asus Transformer TF101
Repairing Black Display on an Asus Transformer TF101
Repairing Black Display on an Asus Transformer TF101 Repairing Black Display on an Asus Transformer TF101
Written By: Rene Jeddore
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Repairing Black Display on an Asus Transformer TF101
INTRODUCTION I was asked to fix a TF101 with a black display. After a bit of Googling I managed to get it working. The repairs is petty simply. Basically requiring one to open the case and plug in the display cable. '''1/17/2014 - I decided to have a look at this guide today and I noticed I hadn't finished it. I apologize for this. I don't have the pictures with me and I am not sure if I kept a copy anywhere. After the last step in the guide you need to remove a little tape from the display connector and push the connector into place. I retaped it using Tuck Tape. A red tape used in construction that is very sticky.''' Good luck!
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Repairing Black Display on an Asus Transformer TF101
Step 1 — Bezel
The first step is to remove two Small Torx Screws on the bottom. I don't know the size as I happened to have an unmarked Torx screwdriver nearby that happened to fit.
Step 2
I used a metal opening tool to spearate the bezel from the front of the unit. Once I had it separated in one area it was relatively easy to spread it using my fingertip. I then worked around the bezel until it popped off.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Repairing Black Display on an Asus Transformer TF101
Step 3
There are four screws to remove behind the bezel. I never got a good picture of the screws but two are indicated here and the other two are in a similar location but just out of the picture.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2018-01-08 06:09:51 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Repairing Black Display on an Asus Transformer TF101 Repairing Black Display on an Asus Transformer TF101
Written By: Rene Jeddore
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Repairing Black Display on an Asus Transformer TF101
INTRODUCTION I was asked to fix a TF101 with a black display. After a bit of Googling I managed to get it working. The repairs is petty simply. Basically requiring one to open the case and plug in the display cable. '''1/17/2014 - I decided to have a look at this guide today and I noticed I hadn't finished it. I apologize for this. I don't have the pictures with me and I am not sure if I kept a copy anywhere. After the last step in the guide you need to remove a little tape from the display connector and push the connector into place. I retaped it using Tuck Tape. A red tape used in construction that is very sticky.''' Good luck!
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Repairing Black Display on an Asus Transformer TF101
Step 1 — Bezel
The first step is to remove two Small Torx Screws on the bottom. I don't know the size as I happened to have an unmarked Torx screwdriver nearby that happened to fit.
Step 2
I used a metal opening tool to spearate the bezel from the front of the unit. Once I had it separated in one area it was relatively easy to spread it using my fingertip. I then worked around the bezel until it popped off.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Repairing Black Display on an Asus Transformer TF101
Step 3
There are four screws to remove behind the bezel. I never got a good picture of the screws but two are indicated here and the other two are in a similar location but just out of the picture.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2018-01-08 06:09:51 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
