road blockers - Drehkreuze - TISO
ROAD BLOCKERS
Being a member of «TSM Group» Corporation, TiSO produces a variety of products including all types of turnstiles, gates, emergency exit doors, blocking, anti-ram systems, and fire-resistant doors. All range of our products produced in full accordance with international standards: СЕ, ISO 90012008, DSTU ISO 9001-2001 and following RoHS doctrines. Also they are certified in accordance with basic safety requirements of EC New Approach Directives (Low Voltage Directive 2006/95/YES. EMC Directive 2004/108/EC). Our products are successfully functioning at: nuclear power plants, strategic, military and industrial facilities, railway stations, stadiums, government and administrative buildings, educational institutions, exhibition centers, stores, malls, sport and recreation zones, hotels, business and office centers, banks and many other places all over the world!
!
Product specifications and complete sets may differ from that shown on the photo. Drawings in catalog are placed for reference. Dimensions may vary depending on configuration.
CONTENTS
Road blocking systems Bollards .............................................................................................. 4 Road Blocker ....................................................................................... 9 Speed Bump ....................................................................................... 13 Tire-Killer & Control Plates ............................................................... 14
road blocking systems
BOLLARDS
Bollards are perfect solution for organizing limited access or pedestrian areas. Due to their good exterior (or, more exactly, laconic unostentatious design) bollards are very popular in cities around the world and don’t spoil the architectural ensembles.
The anti-ram bollards are serious, separately located obstacles on the way of perpetrators. Undoubtedly, they can be installed additionally to anti-rams, but alone they also provide essential protection from perpetrator’s vehicles.
Bollards can be mounted one by one or by groups. Control can be performed for each bollard individually or group of bollards. The important advantage of bollards – compared to other blockers – is the point that they don’t limit the pedestrian movement.
We offer bollards of various types: - Removable - Mechanical (or “manual”, or semiautomatic) parking and anti-ram - hydraulic automatic parking and anti-ram bollards
4
Removable bollards are the cheapest bollard type that can be removed by the need of freeing the driveway. This is a metal pipe with special fastening unit securely mounted (usually cemented) into the road surface or pavement. If it is needed, personnel can take off such bollards to organize free access in several seconds. For safety reasons, such bollard should be locked after its installation. We have removable bollards of two diameters and heights, but we can produce bollards of other sizes on request. Such bollards are not anti-ram and perform only fence function. Fastening unit can be mounted onto road or pavement, or with submerge (but even in such case it is not an anti-ram device). Removable TiSO bollards – are the best and most affordable solution to organize pedestrian zone or parking near shopping centers, malls, office building etc.
road blocking systems
BOLLARDS
Technical specs: Applying
Parking
Height
600 and 800 or other upon request
Diameter
220 and 273 or other upon request
Weight, kg
23 / 38
Width of blocked driveway
Unlimited
Installation
On the roadbed or road surface submerge
5
BOLLARDS
road blocking systems
Semi-automatic bollards are the convenient and reliable solution for territory protection in case there’s no possibility to provide electricity for full-automatic bollards. Semi-automatic bollards have gas spring that can be locked in lower position and rise rapidly in case unlocked. Main advantage of these bollards is that there’s no need in electricity. They are full-autonomic, but require participation of the staff for opening the driveway. This bollard should be pushed down to lower position and locked. Mechanical bollards has simple operating principle: - To release it (move it up) you should just unlock special mechanism (lock) and bollard will rise up in operating position by itself (due to gas spring inside); - To put such bollard down, you should make a pressure vertically on it and lock it in lower position.
When choosing this type of bollards it is important to remember that the abovementioned advantages may appear as disadvantages in certain situations. For example, if it is necessary to consider whether there is a requirements of certain speed to get up / down (since unlike to hydraulic ones that can be controlled remotely, additionally to time it goes itself up / down, staff have also reach such bollard to unlock it manually).
Technical specs: Applying
Parking
The actuating mechanism Rising height, mm Diameter of rising part, mm Dimensions of underground box, WxHxL, mm Weight kg
Gas-spring (gas-lift) 600
800
220
273
373х373х1070
473х473х1344
98
212
Width of blocked driveway Rising time, sec Installation Temperature conditions
6
Unlimited 3
5 Submerge From -35˚C to +50˚C
BOLLARDS “TiSO” hydraulic bollards – are reliable devices, which are easy-to-use and provide maximum durability.
road blocking systems
There are two types of hydraulic bollards in our product range: with build-in hydraulic station and with separately located hydraulic station in special box/ Bollards with build-in hydro-station – is an ideal solution, when quantity of devices is not very big, and also installation of external box is not an option. In this case hydro-station is installed inside underground box (which also serves as a permanent formwork). Obvious advantage of such scheme is simple installation procedure. Main disadvantage is difficulty of service works. Second “hydro-scheme” type - the location of the hydraulic actuator (oil pump) in a separate box (hydro-station), which is installed at some distance from the bollard. In its turn, only oil piston is installed in bollard, which is connected to the box by high-pressure hose. This scheme greatly simplifies the maintenance of hydraulic, as well as allows to simultaneously operate multiple bollards from one hydro-station (so it is less expensive to implement a comprehensive project to protect the perimeter).
“TiSO” company produces parking and anti-ram bollards. Differences and characteristics can be found in chart below. Key features of bollards installation: - arrangement of good drainage system is required (or connection to any other existing drainage system); - after arrangement of drainage, bollard’s body (box) is installed, which also serves as a permanent formwork and simultaneously the frame rigidity to perform the main functions of Ballard - retention of the attack; - bollard itself should be installed in box. Also connection of hydraulic hoses performed at this stage (in the scheme of separate hydro-station) as well as electro-cables; - finally protective cover should be assembled on the top of the bollard; - in parallel box of hydro-station should be installed, which don’t require excavation works (in the scheme of separate hydro-station) Technical specs: Installation type
Submerge
Drive
Hydraulic
Diameter of cylinder, mm
220
273
Height of advancement of cylinder, mm
600
800
541х456х953
473x473x1344
Polished steel / structural steel with polymeric coating
Structural steel with polymeric coating
Dimensions Material of retractable part
4/8
Wall thickness Rising time, sec
6
9
Lowering time, sec
6
9
~ 220 V; 50 Hz
~ 400 V; 50 Hz
550 W
800 W
Power supply Power consumption Equipment protection class
IP 67
Control box protection class Weight, kg
IP 55 102
230
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication
Build-in LED
Impact resistance, kJ
40
Penetration resistance, kJ
130
Blocking in raised position
Hydraulic lock
Manual emergency release
Mechanical manual release device
Connection cable
cable 16*0,75 mm
Operating mode
intensive
7
BOLLARDS
road blocking systems
Technical specs:
8
Installation type
Submerge
Drive
Hydraulic
Anti-ram class
К4 (M30)
К12 (M50)
Diameter of cylinder, mm
325
325
Height of advancement of cylinder, mm
1000
1200
620x620x1747
630x630x2156
Dimensions Material
structural steel with polymeric coating
Thickness
20
30
Rising time, sec
5,5
5
Lowering time, sec
3,5
3
~ 400V; 50 Hz
~ 400 v; 50 Hz
2,5 kW
3,0 kW
Power supply Power consumption Device protection class
IP 67
Control box protection class
IP 55
Weight, kg
999
711
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication Penetration resistance, kJ Blocking rasing position Manual emergency release
Build-in LED 1680
656 Hydraulic lock Mechanical manual release device
Connection cable
cable 16*0,75 mm
Operating mode
intensive
TiSO Company produces wide range of devices for road blocking. We suggest automatic overlying blockers and anti-rams, along with the ones for integration into the road surface. The major feature of our products is very small thickness (from 10 to 27 cm). Due to this feature, all our blockers can be mounted right on the road surface. The construction of all the devices is unified, and in case of such mounting, only additional rampant is required. By this kind of mounting, all our devices perform two functions at once: 1. While “closed”, act as “sleeping policeman” (the device for forced speed lowing) 2. While “open”, entirely block the driveway. Transmission of all this equipment is hydraulic. Like bollards, one hydrostation can control several devices. It should be noted that in case of blocking devices, which corresponding to certain anti-ram classes, there is a need in the arrangement of «foundation» - reinforcement cages, onto which the device will be installed. Thus, underground concreted part becomes integral with the actuator and due to significantly increased area and weight provides proper protection class. Of course, in this option is still required to carry out excavation work at a considerable depth, but with full confidence it can be argued that the cost of such works and materials for reinforcement cages several times lower than devices requiring immersion of the executive part to a big depth. At the same time, it is important to remember that works to arrange reinforcement cages doesn’t requires special qualification and made of local materials (excluding the additional costs of transport) according to provided schemes, drawings, instructions and recommendations. Anti-ram road blockers designed to match the highest protection requirements and well applicable both public and private sectors. We produce anti-ram road blockers of following classes: K4 (or M30-P1 according to ASTM F2656-07) - certified; K8 (or M40-P1 according to ASTM F2656-07); K12 (or M50-P1 according to ASTM F2656-07) - certified. This type of road-blocking equipment of high operating intensity is well applicable to provide anti-terror protection. Anti-ram road blockers are designed as modules with of 2 m or 3 m widths. Thereby, customer has an option to get different combinations of modules which will fit project purposes. In this case, TiSO will provide you all required assistance to prepare the best project solutions. Accept mentioned width, there is option to apply for customized solutions.
road blocking systems
ROAD BLOCKER
9
ROAD BLOCKER
road blocking systems
Technical specs: Installation type
submerge
Anti-ram class
К4 (M30)
Drive
HPU cabinet (external)
Rising height, mm
800 2
3
2170x1693x400
3170x1693x400
Width of blocked driveway Dimensions Maximum load per axis
up to 10 tons
Material
structural steel
Coating
signal yellow-black
Rising time, sec
3,8
Lowering time, sec
2
Power supply
~ 380 V; 50/60 Hz
Power consumption
3 kW / 4 kW
Equpment protection class
IP 55
Control box protection class
IP 55 1540
Weight, kg
2100
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication
Build-in LED
Penetration resistance, kJ
656
Blocking raised position
hydraulic lock in the hydrostation
Manual emergency release
mechanical manual release device
Connection cable
cable 16*0,75 mm
Operating mode
intensive Technical specs:
Installation type
submerge
Anti-ram class
К8 (M40)
Drive
HPU cabinet (external)
Rising height, mm Width of blocked driveway Dimensions
1000 2
3
2170x1693x500
Maximum load per axis Material
structural steel
Coating
signal yellow-black
Rising time, sec
3,8
Lowering time, sec
2,1
Power supply Power consumption
~ 380 V; 50/60 Hz 4 kW
5,5 kW
Equpment protection class
IP 55
Control box protection class
IP 55
Weight, kg
1945
2650
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication Penetration resistance, kJ
10
3170x1693x500 up to 10 tons
Build-in LED 1110
Blocking raised position
hydraulic lock in the hydrostation
Manual emergency release
mechanical manual release device
Connection cable
cable 16*0,75 mm
Operating mode
intensive
ROAD BLOCKER
Installation type
submerge
Anti-ram class
К12 (M50)
Drive
HPU cabinet (external)
Rising height, mm Width of blocked driveway Dimensions
1200 2
3
2140x2272x600
3140x2272x600
Maximum load per axis
up to 10 tons
Material
structural steel
Coating Rising time, sec
signal yellow-black coating 3,6
3,9
Lowering time, sec
2,2
Power supply Power consumption
~ 380 V; 50/60 Hz 5,5 kW
Equpment protection class Control box protection class Weight, kg
7,5 kW IP 55 IP 55
2340
3190
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication Penetration resistance, kJ
Build-in LED 1680
Blocking raised position
hydraulic lock in the hydrostation
Manual emergency release
mechanical manual release device
Connection cable
cable 16*0,75 mm
Operating mode
intensive
road blocking systems
Technical specs:
11
road blocking systems
ROAD BLOCKER
It should be noted, that hydraulic actuator is located in special box (hydrostation) and if there is security requirements of project, this box should be installed on protected territory. Installation of road-blockers contains phases of reinforcement cage arrangement and installation of road-blocking device. Both of these stages don’t require significant qualification and are executed according to attached schemes, drawings and instructions. Reinforcement cage and concrete works are made from local materials, that significantly reduces the cost of whole project realization. Connection scheme, possible distances from hydrostation(s) to anti-ram device(s), as well as speed of rising – are calculated by our engineers individually basing on project (or specification) from customer.
Narrow anti-ram “CYCLOP” is alternative solution to anti-ram bollards, which does not require significant below the ground submerging, in comparison to the last ones. This anti-ram solution provides similar reliability to standard wide anti-ram road blockers and takes less space at the same time. This type of a roadblocker can be installed separately, as well as in groups. If required, CYCLOP can be installed group can include opposite directed to each other two units (in purposes of two-directional vehicle access control implementation).
Technical specs: Installation type
submerge
Drive Rising height, mm
hydraulic (integrated) 600
750
Width of blocked driveway, mm Dimensions
300 1268x580x168
The maximum load per axe Material
structural steel
Coating
signal yellow-black
Rising time, sec
3,6
Lowering time, sec
2
Power supply Power consumption
~ 220 V; 50 Hz 0,3 kW
2,1 kW
Device protection class
IP 55
Control box protection class
IP 55
Weight, kg
150
330
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication Penetration resistance, kJ
12
1572x532x218 up to 10 tons
Build-in LED 179
271
Blocking in upper position
hydraulic lock in the hydrostation
Manual emergency release
mechanical manual release device
Connection cable
cable 16*0,75 mm
Operating mode
intensive
This type of a road-blocker designed in purposes of effective vehicle access control implementation. Various modifications as well two installation options: surface or submerge, makes this type of a road- blocker a definitive solution to match large part of tasks. In set included “protective curtain” provides safeness of a road blocker operating performance, as well secures equipment from harmful exteriors. With a surface mounting installation type, SPEEDBUMP provides both functions of a road-blocker, as well as a speed hump. In this case, to ensure secured vehicle pass of a SPEEDBUMP, equipment should be installed in set with entrance and exit ramps. These ramps are provided in two modifications: 1) “short” usually applied to driveways with intensive traffic of heavy vehicles (trucks, buses etc); 2) “long” designed for SPEEDBUMP passing of vehicles with little road clearance.
SPEEDBUMPS are mounted with the help of anchors / land ties. We recommend installation of road blocker in a set with barrier or traffic light with two –lights indication. In addition, roadblocker’s control box provides the possibility of induction loops operation support. Due to opportunity of “combined modules” principle implementation, road-blocker’s design provides an option to block driveways of significant width. Modules have widths of 2 m and 3 m and can be combined in different ways (2+2, 2+3+2, 3+3+3 etc). In this regard, SPEEDBUMP solution is well applicable to the widest range of vehicle access control project purposes.
Technical specs: Installation type
On the roadbed* or with road surface submerge
Drive
HPU integrated
Location of hydrostation
Build-in
Rising height, mm Width of blocked driveway
350 2
3
Dimensions
2000x1040x118
3000x1040x118
Dimensions with front and side ramps*
2600x2200x118
3600x2200x118
Maximum load per axis
up to 10 tons
Material
structural steel
Coating
Signal yellow-black coating
Rising time, sec
5
7,5
Lowering time, sec
5
7,5
Power supply
220 V, 50 Hz
Power consumption
550 W
Equipment protection class
IP 67
Control box protection class Weight, kg
IP 55 385
570
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication
Build-in LED
Impact resistance, kJ
40
Penetration resistance, kJ
130
Blocking raised position
Hydraulic lock in the hydrostation
Manual emergency release
Mechanical manual release device
Connection cable (to be delivered additionally) Operating mode
road blocking systems
SPEED BUMP
cable 16*0,75 mm intensive
* surface installation requires ramps to be in set
13
TIRE-KILLER
road blocking systems
Two types of tire-killers are produced by “TiSO”: automatic with hydraulic mechanism and semi-automatic with springs or with lever drive. Main difference between these types – possibility of free two-directional driveway organization. So, semiautomatic device is always in raised position and can be closed when vehicle tires will push them while driving on them (or by turning special lever). In its turn, hydraulic device can be closed in any time for unlimited period. Both types of tire-killers, as well as other blockers of “TiSO” can be mounted on road surface or with submerge. Our company offers tire-killers with various “knife” height: from 40 to 250 mm. Selection of knife-height is depending from checkpoint and transport type, which passes through it: for big trucks the best choice is high “blades”, and small “knives” are better for standard cars. It should be noted, that height-choice is important only for semi-automatic tire-killer. Thus, free pass through hydraulic (automatic) device is possible only if “knives” are in closed position. In this case, there is no possibility that “knives” will damage the car bottom.
Hydraulic tire-killers – are reliable and easy-to-use solution for territory protection. Hydraulic pump is been installed inside the device, so like it is in SpeedBump, just electronic control box should be installed outside. Various types of hydraulic tire-killers allows to choose exactly that option, which will ideally solve your project requirements: one or two protected sides, positioning relative to the axes. All types of this device can be installed on road surface (with ramps), as well as with submerge.
Technical specs: Installation type
On the roadbed* or with road surface submerge Hydraulic
Drive
80/170
Rising height (passenger car/trucks), mm 2
3
Dimensions
2000х1040х118
3000х1040х118
Dimensions with front and side ramps*
2600х2200х118
3600х2200х118
Width of blocked driveway, m
up to 10 tons
Maximum load per axis
Structural steel
Material
Signal yellow-black coating
Coating Rising time, sec
5
Lowering time, sec
5
7,5 7,5 ~ 220 V; 50 Hz
Power supply Power consumption
110 W
550 W
Equipment protection class
IP 55
IP 67 IP 55
Control box protection class Weight single pass/two-pass (passenger car), kg
295/377
Weight single pass/two-pass (trucks), kg
319/430
507/640
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication
Build-in LED
Blocking raised position
Hydraulic lock in the hydrostation
Manual emergency release
Mechanical manual release device
Connection cable
cable 16х0,75 mm
Operating mode
Intensive
* surface installation requires ramps to be in set
14
470/603
TIRE-KILLER
We offer two types of such devices: with springs or with lever drive. In first case – knives are always in raised position and pushed down by tires. In second – knives can be closed by rotating lever, or by joining (connecting) it with barrier. In this case, you get device which works synchronously with barrier. Models with installation on road surface or with submerge are available.
Position 1
Technical specs: Application Drive
Blocking of the driveway Mechanical: manual or with springs
Rising height, mm Dimensions in stand-by position (closed) (LxWxH) Weight kg Width of blocked driveway Maximum load per axis
40 1 x 1,5 m х 440 mm х 70 mm
Position 2
62 (for 1m width model) Unlimited (standard – 1 or 1,5m) Up to 10 tons
Installation
Surface or submerge
Temperature conditions
From -35˚C tо +50˚C
Position 3
road blocking systems
Mechanical driven tire-killers will be the best option for places, where is no possibility to connect the electricity.
Control plates (Mechanical Blockers) This type of mechanical road-blockers is simple and reliable solution to the purposes of one-directional vehicle access control organizing. It’s operation principle is very simple, lifted up plate becomes an obstacle of the similar height as kerb. Control plates can be mounted in two ways: submerging and surface installation. This type of equipment operates well for private parking establishments and municipal driveways.
Length
315 mm
Width
250 mm
Height, «stand by» mode
132 mm
Height, «go thru» mode
32 mm
15
14, Promyslova str., Kyiv, 02088, Ukraine tel.: +380 (44) 291-21-11 fax: +380 (44) 291-21-12 e-mail: [email protected] www.tiso-blockers.com www.tiso.global December 2015
Being a member of «TSM Group» Corporation, TiSO produces a variety of products including all types of turnstiles, gates, emergency exit doors, blocking, anti-ram systems, and fire-resistant doors. All range of our products produced in full accordance with international standards: СЕ, ISO 90012008, DSTU ISO 9001-2001 and following RoHS doctrines. Also they are certified in accordance with basic safety requirements of EC New Approach Directives (Low Voltage Directive 2006/95/YES. EMC Directive 2004/108/EC). Our products are successfully functioning at: nuclear power plants, strategic, military and industrial facilities, railway stations, stadiums, government and administrative buildings, educational institutions, exhibition centers, stores, malls, sport and recreation zones, hotels, business and office centers, banks and many other places all over the world!
!
Product specifications and complete sets may differ from that shown on the photo. Drawings in catalog are placed for reference. Dimensions may vary depending on configuration.
CONTENTS
Road blocking systems Bollards .............................................................................................. 4 Road Blocker ....................................................................................... 9 Speed Bump ....................................................................................... 13 Tire-Killer & Control Plates ............................................................... 14
road blocking systems
BOLLARDS
Bollards are perfect solution for organizing limited access or pedestrian areas. Due to their good exterior (or, more exactly, laconic unostentatious design) bollards are very popular in cities around the world and don’t spoil the architectural ensembles.
The anti-ram bollards are serious, separately located obstacles on the way of perpetrators. Undoubtedly, they can be installed additionally to anti-rams, but alone they also provide essential protection from perpetrator’s vehicles.
Bollards can be mounted one by one or by groups. Control can be performed for each bollard individually or group of bollards. The important advantage of bollards – compared to other blockers – is the point that they don’t limit the pedestrian movement.
We offer bollards of various types: - Removable - Mechanical (or “manual”, or semiautomatic) parking and anti-ram - hydraulic automatic parking and anti-ram bollards
4
Removable bollards are the cheapest bollard type that can be removed by the need of freeing the driveway. This is a metal pipe with special fastening unit securely mounted (usually cemented) into the road surface or pavement. If it is needed, personnel can take off such bollards to organize free access in several seconds. For safety reasons, such bollard should be locked after its installation. We have removable bollards of two diameters and heights, but we can produce bollards of other sizes on request. Such bollards are not anti-ram and perform only fence function. Fastening unit can be mounted onto road or pavement, or with submerge (but even in such case it is not an anti-ram device). Removable TiSO bollards – are the best and most affordable solution to organize pedestrian zone or parking near shopping centers, malls, office building etc.
road blocking systems
BOLLARDS
Technical specs: Applying
Parking
Height
600 and 800 or other upon request
Diameter
220 and 273 or other upon request
Weight, kg
23 / 38
Width of blocked driveway
Unlimited
Installation
On the roadbed or road surface submerge
5
BOLLARDS
road blocking systems
Semi-automatic bollards are the convenient and reliable solution for territory protection in case there’s no possibility to provide electricity for full-automatic bollards. Semi-automatic bollards have gas spring that can be locked in lower position and rise rapidly in case unlocked. Main advantage of these bollards is that there’s no need in electricity. They are full-autonomic, but require participation of the staff for opening the driveway. This bollard should be pushed down to lower position and locked. Mechanical bollards has simple operating principle: - To release it (move it up) you should just unlock special mechanism (lock) and bollard will rise up in operating position by itself (due to gas spring inside); - To put such bollard down, you should make a pressure vertically on it and lock it in lower position.
When choosing this type of bollards it is important to remember that the abovementioned advantages may appear as disadvantages in certain situations. For example, if it is necessary to consider whether there is a requirements of certain speed to get up / down (since unlike to hydraulic ones that can be controlled remotely, additionally to time it goes itself up / down, staff have also reach such bollard to unlock it manually).
Technical specs: Applying
Parking
The actuating mechanism Rising height, mm Diameter of rising part, mm Dimensions of underground box, WxHxL, mm Weight kg
Gas-spring (gas-lift) 600
800
220
273
373х373х1070
473х473х1344
98
212
Width of blocked driveway Rising time, sec Installation Temperature conditions
6
Unlimited 3
5 Submerge From -35˚C to +50˚C
BOLLARDS “TiSO” hydraulic bollards – are reliable devices, which are easy-to-use and provide maximum durability.
road blocking systems
There are two types of hydraulic bollards in our product range: with build-in hydraulic station and with separately located hydraulic station in special box/ Bollards with build-in hydro-station – is an ideal solution, when quantity of devices is not very big, and also installation of external box is not an option. In this case hydro-station is installed inside underground box (which also serves as a permanent formwork). Obvious advantage of such scheme is simple installation procedure. Main disadvantage is difficulty of service works. Second “hydro-scheme” type - the location of the hydraulic actuator (oil pump) in a separate box (hydro-station), which is installed at some distance from the bollard. In its turn, only oil piston is installed in bollard, which is connected to the box by high-pressure hose. This scheme greatly simplifies the maintenance of hydraulic, as well as allows to simultaneously operate multiple bollards from one hydro-station (so it is less expensive to implement a comprehensive project to protect the perimeter).
“TiSO” company produces parking and anti-ram bollards. Differences and characteristics can be found in chart below. Key features of bollards installation: - arrangement of good drainage system is required (or connection to any other existing drainage system); - after arrangement of drainage, bollard’s body (box) is installed, which also serves as a permanent formwork and simultaneously the frame rigidity to perform the main functions of Ballard - retention of the attack; - bollard itself should be installed in box. Also connection of hydraulic hoses performed at this stage (in the scheme of separate hydro-station) as well as electro-cables; - finally protective cover should be assembled on the top of the bollard; - in parallel box of hydro-station should be installed, which don’t require excavation works (in the scheme of separate hydro-station) Technical specs: Installation type
Submerge
Drive
Hydraulic
Diameter of cylinder, mm
220
273
Height of advancement of cylinder, mm
600
800
541х456х953
473x473x1344
Polished steel / structural steel with polymeric coating
Structural steel with polymeric coating
Dimensions Material of retractable part
4/8
Wall thickness Rising time, sec
6
9
Lowering time, sec
6
9
~ 220 V; 50 Hz
~ 400 V; 50 Hz
550 W
800 W
Power supply Power consumption Equipment protection class
IP 67
Control box protection class Weight, kg
IP 55 102
230
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication
Build-in LED
Impact resistance, kJ
40
Penetration resistance, kJ
130
Blocking in raised position
Hydraulic lock
Manual emergency release
Mechanical manual release device
Connection cable
cable 16*0,75 mm
Operating mode
intensive
7
BOLLARDS
road blocking systems
Technical specs:
8
Installation type
Submerge
Drive
Hydraulic
Anti-ram class
К4 (M30)
К12 (M50)
Diameter of cylinder, mm
325
325
Height of advancement of cylinder, mm
1000
1200
620x620x1747
630x630x2156
Dimensions Material
structural steel with polymeric coating
Thickness
20
30
Rising time, sec
5,5
5
Lowering time, sec
3,5
3
~ 400V; 50 Hz
~ 400 v; 50 Hz
2,5 kW
3,0 kW
Power supply Power consumption Device protection class
IP 67
Control box protection class
IP 55
Weight, kg
999
711
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication Penetration resistance, kJ Blocking rasing position Manual emergency release
Build-in LED 1680
656 Hydraulic lock Mechanical manual release device
Connection cable
cable 16*0,75 mm
Operating mode
intensive
TiSO Company produces wide range of devices for road blocking. We suggest automatic overlying blockers and anti-rams, along with the ones for integration into the road surface. The major feature of our products is very small thickness (from 10 to 27 cm). Due to this feature, all our blockers can be mounted right on the road surface. The construction of all the devices is unified, and in case of such mounting, only additional rampant is required. By this kind of mounting, all our devices perform two functions at once: 1. While “closed”, act as “sleeping policeman” (the device for forced speed lowing) 2. While “open”, entirely block the driveway. Transmission of all this equipment is hydraulic. Like bollards, one hydrostation can control several devices. It should be noted that in case of blocking devices, which corresponding to certain anti-ram classes, there is a need in the arrangement of «foundation» - reinforcement cages, onto which the device will be installed. Thus, underground concreted part becomes integral with the actuator and due to significantly increased area and weight provides proper protection class. Of course, in this option is still required to carry out excavation work at a considerable depth, but with full confidence it can be argued that the cost of such works and materials for reinforcement cages several times lower than devices requiring immersion of the executive part to a big depth. At the same time, it is important to remember that works to arrange reinforcement cages doesn’t requires special qualification and made of local materials (excluding the additional costs of transport) according to provided schemes, drawings, instructions and recommendations. Anti-ram road blockers designed to match the highest protection requirements and well applicable both public and private sectors. We produce anti-ram road blockers of following classes: K4 (or M30-P1 according to ASTM F2656-07) - certified; K8 (or M40-P1 according to ASTM F2656-07); K12 (or M50-P1 according to ASTM F2656-07) - certified. This type of road-blocking equipment of high operating intensity is well applicable to provide anti-terror protection. Anti-ram road blockers are designed as modules with of 2 m or 3 m widths. Thereby, customer has an option to get different combinations of modules which will fit project purposes. In this case, TiSO will provide you all required assistance to prepare the best project solutions. Accept mentioned width, there is option to apply for customized solutions.
road blocking systems
ROAD BLOCKER
9
ROAD BLOCKER
road blocking systems
Technical specs: Installation type
submerge
Anti-ram class
К4 (M30)
Drive
HPU cabinet (external)
Rising height, mm
800 2
3
2170x1693x400
3170x1693x400
Width of blocked driveway Dimensions Maximum load per axis
up to 10 tons
Material
structural steel
Coating
signal yellow-black
Rising time, sec
3,8
Lowering time, sec
2
Power supply
~ 380 V; 50/60 Hz
Power consumption
3 kW / 4 kW
Equpment protection class
IP 55
Control box protection class
IP 55 1540
Weight, kg
2100
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication
Build-in LED
Penetration resistance, kJ
656
Blocking raised position
hydraulic lock in the hydrostation
Manual emergency release
mechanical manual release device
Connection cable
cable 16*0,75 mm
Operating mode
intensive Technical specs:
Installation type
submerge
Anti-ram class
К8 (M40)
Drive
HPU cabinet (external)
Rising height, mm Width of blocked driveway Dimensions
1000 2
3
2170x1693x500
Maximum load per axis Material
structural steel
Coating
signal yellow-black
Rising time, sec
3,8
Lowering time, sec
2,1
Power supply Power consumption
~ 380 V; 50/60 Hz 4 kW
5,5 kW
Equpment protection class
IP 55
Control box protection class
IP 55
Weight, kg
1945
2650
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication Penetration resistance, kJ
10
3170x1693x500 up to 10 tons
Build-in LED 1110
Blocking raised position
hydraulic lock in the hydrostation
Manual emergency release
mechanical manual release device
Connection cable
cable 16*0,75 mm
Operating mode
intensive
ROAD BLOCKER
Installation type
submerge
Anti-ram class
К12 (M50)
Drive
HPU cabinet (external)
Rising height, mm Width of blocked driveway Dimensions
1200 2
3
2140x2272x600
3140x2272x600
Maximum load per axis
up to 10 tons
Material
structural steel
Coating Rising time, sec
signal yellow-black coating 3,6
3,9
Lowering time, sec
2,2
Power supply Power consumption
~ 380 V; 50/60 Hz 5,5 kW
Equpment protection class Control box protection class Weight, kg
7,5 kW IP 55 IP 55
2340
3190
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication Penetration resistance, kJ
Build-in LED 1680
Blocking raised position
hydraulic lock in the hydrostation
Manual emergency release
mechanical manual release device
Connection cable
cable 16*0,75 mm
Operating mode
intensive
road blocking systems
Technical specs:
11
road blocking systems
ROAD BLOCKER
It should be noted, that hydraulic actuator is located in special box (hydrostation) and if there is security requirements of project, this box should be installed on protected territory. Installation of road-blockers contains phases of reinforcement cage arrangement and installation of road-blocking device. Both of these stages don’t require significant qualification and are executed according to attached schemes, drawings and instructions. Reinforcement cage and concrete works are made from local materials, that significantly reduces the cost of whole project realization. Connection scheme, possible distances from hydrostation(s) to anti-ram device(s), as well as speed of rising – are calculated by our engineers individually basing on project (or specification) from customer.
Narrow anti-ram “CYCLOP” is alternative solution to anti-ram bollards, which does not require significant below the ground submerging, in comparison to the last ones. This anti-ram solution provides similar reliability to standard wide anti-ram road blockers and takes less space at the same time. This type of a roadblocker can be installed separately, as well as in groups. If required, CYCLOP can be installed group can include opposite directed to each other two units (in purposes of two-directional vehicle access control implementation).
Technical specs: Installation type
submerge
Drive Rising height, mm
hydraulic (integrated) 600
750
Width of blocked driveway, mm Dimensions
300 1268x580x168
The maximum load per axe Material
structural steel
Coating
signal yellow-black
Rising time, sec
3,6
Lowering time, sec
2
Power supply Power consumption
~ 220 V; 50 Hz 0,3 kW
2,1 kW
Device protection class
IP 55
Control box protection class
IP 55
Weight, kg
150
330
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication Penetration resistance, kJ
12
1572x532x218 up to 10 tons
Build-in LED 179
271
Blocking in upper position
hydraulic lock in the hydrostation
Manual emergency release
mechanical manual release device
Connection cable
cable 16*0,75 mm
Operating mode
intensive
This type of a road-blocker designed in purposes of effective vehicle access control implementation. Various modifications as well two installation options: surface or submerge, makes this type of a road- blocker a definitive solution to match large part of tasks. In set included “protective curtain” provides safeness of a road blocker operating performance, as well secures equipment from harmful exteriors. With a surface mounting installation type, SPEEDBUMP provides both functions of a road-blocker, as well as a speed hump. In this case, to ensure secured vehicle pass of a SPEEDBUMP, equipment should be installed in set with entrance and exit ramps. These ramps are provided in two modifications: 1) “short” usually applied to driveways with intensive traffic of heavy vehicles (trucks, buses etc); 2) “long” designed for SPEEDBUMP passing of vehicles with little road clearance.
SPEEDBUMPS are mounted with the help of anchors / land ties. We recommend installation of road blocker in a set with barrier or traffic light with two –lights indication. In addition, roadblocker’s control box provides the possibility of induction loops operation support. Due to opportunity of “combined modules” principle implementation, road-blocker’s design provides an option to block driveways of significant width. Modules have widths of 2 m and 3 m and can be combined in different ways (2+2, 2+3+2, 3+3+3 etc). In this regard, SPEEDBUMP solution is well applicable to the widest range of vehicle access control project purposes.
Technical specs: Installation type
On the roadbed* or with road surface submerge
Drive
HPU integrated
Location of hydrostation
Build-in
Rising height, mm Width of blocked driveway
350 2
3
Dimensions
2000x1040x118
3000x1040x118
Dimensions with front and side ramps*
2600x2200x118
3600x2200x118
Maximum load per axis
up to 10 tons
Material
structural steel
Coating
Signal yellow-black coating
Rising time, sec
5
7,5
Lowering time, sec
5
7,5
Power supply
220 V, 50 Hz
Power consumption
550 W
Equipment protection class
IP 67
Control box protection class Weight, kg
IP 55 385
570
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication
Build-in LED
Impact resistance, kJ
40
Penetration resistance, kJ
130
Blocking raised position
Hydraulic lock in the hydrostation
Manual emergency release
Mechanical manual release device
Connection cable (to be delivered additionally) Operating mode
road blocking systems
SPEED BUMP
cable 16*0,75 mm intensive
* surface installation requires ramps to be in set
13
TIRE-KILLER
road blocking systems
Two types of tire-killers are produced by “TiSO”: automatic with hydraulic mechanism and semi-automatic with springs or with lever drive. Main difference between these types – possibility of free two-directional driveway organization. So, semiautomatic device is always in raised position and can be closed when vehicle tires will push them while driving on them (or by turning special lever). In its turn, hydraulic device can be closed in any time for unlimited period. Both types of tire-killers, as well as other blockers of “TiSO” can be mounted on road surface or with submerge. Our company offers tire-killers with various “knife” height: from 40 to 250 mm. Selection of knife-height is depending from checkpoint and transport type, which passes through it: for big trucks the best choice is high “blades”, and small “knives” are better for standard cars. It should be noted, that height-choice is important only for semi-automatic tire-killer. Thus, free pass through hydraulic (automatic) device is possible only if “knives” are in closed position. In this case, there is no possibility that “knives” will damage the car bottom.
Hydraulic tire-killers – are reliable and easy-to-use solution for territory protection. Hydraulic pump is been installed inside the device, so like it is in SpeedBump, just electronic control box should be installed outside. Various types of hydraulic tire-killers allows to choose exactly that option, which will ideally solve your project requirements: one or two protected sides, positioning relative to the axes. All types of this device can be installed on road surface (with ramps), as well as with submerge.
Technical specs: Installation type
On the roadbed* or with road surface submerge Hydraulic
Drive
80/170
Rising height (passenger car/trucks), mm 2
3
Dimensions
2000х1040х118
3000х1040х118
Dimensions with front and side ramps*
2600х2200х118
3600х2200х118
Width of blocked driveway, m
up to 10 tons
Maximum load per axis
Structural steel
Material
Signal yellow-black coating
Coating Rising time, sec
5
Lowering time, sec
5
7,5 7,5 ~ 220 V; 50 Hz
Power supply Power consumption
110 W
550 W
Equipment protection class
IP 55
IP 67 IP 55
Control box protection class Weight single pass/two-pass (passenger car), kg
295/377
Weight single pass/two-pass (trucks), kg
319/430
507/640
Temperature conditions
from -10˚C to +50˚C
Temperature conditions (with optional heating system)
from -30˚C to +50˚C
Light indication
Build-in LED
Blocking raised position
Hydraulic lock in the hydrostation
Manual emergency release
Mechanical manual release device
Connection cable
cable 16х0,75 mm
Operating mode
Intensive
* surface installation requires ramps to be in set
14
470/603
TIRE-KILLER
We offer two types of such devices: with springs or with lever drive. In first case – knives are always in raised position and pushed down by tires. In second – knives can be closed by rotating lever, or by joining (connecting) it with barrier. In this case, you get device which works synchronously with barrier. Models with installation on road surface or with submerge are available.
Position 1
Technical specs: Application Drive
Blocking of the driveway Mechanical: manual or with springs
Rising height, mm Dimensions in stand-by position (closed) (LxWxH) Weight kg Width of blocked driveway Maximum load per axis
40 1 x 1,5 m х 440 mm х 70 mm
Position 2
62 (for 1m width model) Unlimited (standard – 1 or 1,5m) Up to 10 tons
Installation
Surface or submerge
Temperature conditions
From -35˚C tо +50˚C
Position 3
road blocking systems
Mechanical driven tire-killers will be the best option for places, where is no possibility to connect the electricity.
Control plates (Mechanical Blockers) This type of mechanical road-blockers is simple and reliable solution to the purposes of one-directional vehicle access control organizing. It’s operation principle is very simple, lifted up plate becomes an obstacle of the similar height as kerb. Control plates can be mounted in two ways: submerging and surface installation. This type of equipment operates well for private parking establishments and municipal driveways.
Length
315 mm
Width
250 mm
Height, «stand by» mode
132 mm
Height, «go thru» mode
32 mm
15
14, Promyslova str., Kyiv, 02088, Ukraine tel.: +380 (44) 291-21-11 fax: +380 (44) 291-21-12 e-mail: [email protected] www.tiso-blockers.com www.tiso.global December 2015
