RST RST Ballast Tampers - KINSHOFER
3t
6t 5
8t
10 t
12 t
14 t
16 t
18 t
20 t
22 t
24 t
26 t
Ballast Tampers
28 t
30 t
RST
Using a RST Ballast Tamper mounted for example to a tiltrotator, the packing of ballast under sleepers is not only fast, but also efficient and economical – ideal for road-rail excavators with 5 - 24 t / 11000 - 52800 lbs operating weight. l l l
l l l l l l
Low weight. Complete with high frequency vibrating unit (except RST 04). Efficiency: The strong, silent compressor destabilises the gravel ballast, while the built-in vibration unit is running. The four arms are thrust into the gravel and pack it by vibrating. They move alongside and below the sleeper into the ground and tamper optimally. Flexibility: adjustable arms and force. High and flexible frequency. Low noise operation. Strong vibration rubbers for low vibration against the machine. Adjustable tamping depth. Different displacements of engines available according to the pump capacity needed.
Ballast Tampers RST Type
Gripping range A (mm / in) 195 - 650 / 7.83 - 25.59 195 - 650 / 7.83 - 25.59
RST 03 RST 04
Package consists of:
Weight (kg / lbs) 640 / 1408 360 / 792
Length B (mm / in) 830 / 32.68 -
Height C (with adapter) (mm / in) 1310 / 51.57 -
Width D (mm / in) 525 / 20.67 -
Gripper elements (pieces) 4 4
Compaction Operating force weight (kg /lbs) (t / lbs) 7500 / 5 - 24 / 16500 11000 - 52800 14 - 24 / 30800 - 52800
ballast tamper, vibrating unit (except RST 04), bolt-on or welded coupler
Requirements of Excavator Two hydraulic circuits needed, one double effective (open / close) and one hammer line (vibration) Operating pressure: max. 20 MPa (200 bar) / 2880 psi Pump capacity: 40 - 130 l/min / 10.57 - 34.35 GPM (free line to tank required) Different couplings available Technical Drawings – Example of Use B
VIDEO
C
D
A
We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
6t 5
8t
10 t
12 t
14 t
16 t
18 t
20 t
22 t
24 t
26 t
Ballast Tampers
28 t
30 t
RST
Using a RST Ballast Tamper mounted for example to a tiltrotator, the packing of ballast under sleepers is not only fast, but also efficient and economical – ideal for road-rail excavators with 5 - 24 t / 11000 - 52800 lbs operating weight. l l l
l l l l l l
Low weight. Complete with high frequency vibrating unit (except RST 04). Efficiency: The strong, silent compressor destabilises the gravel ballast, while the built-in vibration unit is running. The four arms are thrust into the gravel and pack it by vibrating. They move alongside and below the sleeper into the ground and tamper optimally. Flexibility: adjustable arms and force. High and flexible frequency. Low noise operation. Strong vibration rubbers for low vibration against the machine. Adjustable tamping depth. Different displacements of engines available according to the pump capacity needed.
Ballast Tampers RST Type
Gripping range A (mm / in) 195 - 650 / 7.83 - 25.59 195 - 650 / 7.83 - 25.59
RST 03 RST 04
Package consists of:
Weight (kg / lbs) 640 / 1408 360 / 792
Length B (mm / in) 830 / 32.68 -
Height C (with adapter) (mm / in) 1310 / 51.57 -
Width D (mm / in) 525 / 20.67 -
Gripper elements (pieces) 4 4
Compaction Operating force weight (kg /lbs) (t / lbs) 7500 / 5 - 24 / 16500 11000 - 52800 14 - 24 / 30800 - 52800
ballast tamper, vibrating unit (except RST 04), bolt-on or welded coupler
Requirements of Excavator Two hydraulic circuits needed, one double effective (open / close) and one hammer line (vibration) Operating pressure: max. 20 MPa (200 bar) / 2880 psi Pump capacity: 40 - 130 l/min / 10.57 - 34.35 GPM (free line to tank required) Different couplings available Technical Drawings – Example of Use B
VIDEO
C
D
A
We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
