RTI App Note - iPort
LaunchPort with Buttons Configuration with RTI Systems LaunchPort Sleeve Buttons can be configured to be used with RTI systems. Communication with RTI system occurs between the RTI processor and a Lutron Radio Ra 2 or HomeWorks QS processor. KILLER APP: Volume Control AV System On / Off 1. Download the Lutron Radio Ra 2 / HomeWorks QS Driver from the RTI Dealer portal 2. Create a new Programming Configuration in the RTI Integration Designer software 3. Add an RTI Processor to the System Workspace
4. Add the Lutron Driver to the RTI Control System a. Set the IP Address of the Lutron hardware if connecting via IP
b. Set the Port for communicating with the Lutron hardware if connecting via RS-232
5. Add system Macros to the RTI Control System a. Set the ID, Description (Volume up, Volume Dn, etc.)
b. Choose the command to control on the device you wish to control
6. Adding the events: a. Create a new event b. Select the Lutron driver options c. Choose the button # that shall be pressed to initiate the macro. (See the LaunchPort Lutron Integration document for more information on Integration IDs and Button numbering)
7. Ensure the Macro shows up on the Events Tab on the Control System and Click “Enable”
4. Add the Lutron Driver to the RTI Control System a. Set the IP Address of the Lutron hardware if connecting via IP
b. Set the Port for communicating with the Lutron hardware if connecting via RS-232
5. Add system Macros to the RTI Control System a. Set the ID, Description (Volume up, Volume Dn, etc.)
b. Choose the command to control on the device you wish to control
6. Adding the events: a. Create a new event b. Select the Lutron driver options c. Choose the button # that shall be pressed to initiate the macro. (See the LaunchPort Lutron Integration document for more information on Integration IDs and Button numbering)
7. Ensure the Macro shows up on the Events Tab on the Control System and Click “Enable”
