Samsung Galaxy Pocket Neo S5310 Logic Board Replacement

Samsung Galaxy Pocket Neo S5310 Logic Board Replacement

Samsung Galaxy Pocket Neo S5310 Logic Board Replacement Samsung Galaxy Pocket Neo S5310 Logic Board Replacement

Written By: ZFix

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Samsung Galaxy Pocket Neo S5310 Logic Board Replacement

INTRODUCTION How to disassemble the phone and remove the Logic board.

________________________Vedeo manual:________________________ [video: http://youtu.be/jiiAvS1RDQk]

TOOLS: Phillips #0 Screwdriver (1) iFixit Opening Tools (1) Spudger (1) Tweezers (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Samsung Galaxy Pocket Neo S5310 Logic Board Replacement

Step 1 — Loudspeaker



Remove any SIM and SD card.



Remove 7x Phillips screws.



Use a plastic tool to disassemble the rear housing.

Step 2 

© iFixit — CC BY-NC-SA

www.iFixit.com

The Loudspeaker is located on the rear housing..

Page 3 of 4

Samsung Galaxy Pocket Neo S5310 Logic Board Replacement

Step 3 — Logic Board



Disconnect the LCD Display flex cable.



Lift up the board and disconnect the Touchscreen flex cable.



Now you can remove the Motherboard.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 04:46:54 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4