Sanyo Katana Eclipse X Battery Replacement
Sanyo Katana Eclipse X Battery Replacement
Sanyo Katana Eclipse X Battery Replacement This guide provides instructions for replacing a the phone's battery.
Written By: Thomas Scaggs
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Sanyo Katana Eclipse X Battery Replacement
INTRODUCTION This guide will illustrate for you how to replace the battery from a Sanyo Katana Eclipse X.
TOOLS: Flathead 3/32" or 2.5 mm Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Sanyo Katana Eclipse X Battery Replacement
Step 1 — Back Panel
Press the battery release button located on the back of the phone.
With the button depressed, pull down on the battery protector to remove it from the phone.
The phone's battery will now be exposed. Step 2
Slide a thin object under the white tab located on the bottom of the battery and carefully lift away from the phone.
A small, flat-tip screwdriver or credit card may be helpful for this step.
© iFixit — CC BY-NC-SA
www.iFixit.com
The battery should now be free of the phone.
Page 3 of 4
Sanyo Katana Eclipse X Battery Replacement
Step 3 — Battery
Align the copper receptors on the back of your battery so the phone's copper receptors are touching the battery terminals.
Refer to photo illustrations.
Using your thumb, apply gentle pressure to the battery until it clicks into place.
Take the phone’s back casing and set it over the battery.
Apply gentle pressure, pushing toward the top of the phone until your hear a click.
Step 4
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-31 03:23:10 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Sanyo Katana Eclipse X Battery Replacement This guide provides instructions for replacing a the phone's battery.
Written By: Thomas Scaggs
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Sanyo Katana Eclipse X Battery Replacement
INTRODUCTION This guide will illustrate for you how to replace the battery from a Sanyo Katana Eclipse X.
TOOLS: Flathead 3/32" or 2.5 mm Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Sanyo Katana Eclipse X Battery Replacement
Step 1 — Back Panel
Press the battery release button located on the back of the phone.
With the button depressed, pull down on the battery protector to remove it from the phone.
The phone's battery will now be exposed. Step 2
Slide a thin object under the white tab located on the bottom of the battery and carefully lift away from the phone.
A small, flat-tip screwdriver or credit card may be helpful for this step.
© iFixit — CC BY-NC-SA
www.iFixit.com
The battery should now be free of the phone.
Page 3 of 4
Sanyo Katana Eclipse X Battery Replacement
Step 3 — Battery
Align the copper receptors on the back of your battery so the phone's copper receptors are touching the battery terminals.
Refer to photo illustrations.
Using your thumb, apply gentle pressure to the battery until it clicks into place.
Take the phone’s back casing and set it over the battery.
Apply gentle pressure, pushing toward the top of the phone until your hear a click.
Step 4
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-31 03:23:10 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
