Sanyo VPC-T850 LCD Display Replacement

Sanyo VPC-T850 LCD Display Replacement

Sanyo VPC-T850 LCD Display Replacement Written By: Jonathan Yau

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Sanyo VPC-T850 LCD Display Replacement

INTRODUCTION Instructions on how remove the LCD display.

TOOLS: Phillips #00 Screwdriver (1) iFixit Opening Tools (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Sanyo VPC-T850 LCD Display Replacement

Step 1 — Disconnect the Ribbon

 Use caution not to damage ribbon when disconnecting. 

The yellow ribbon is attached to the right side of the screen and goes to a black connector piece.



Gently flip the black connector away from the LCD screen to unlock the yellow ribbon.



Carefully pull the yellow ribbon towards the LCD screen to disconnect it.

Step 2 — Remove LCD Screen



© iFixit — CC BY-NC-SA

www.iFixit.com

The LCD screen should now be disconnected from the rest of the camera and a pry tool can be used to lift it out of its casing.

Page 3 of 4

Sanyo VPC-T850 LCD Display Replacement

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 12:42:00 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4