Sega Dreamcast Expansion Bay Replacement

Report 4 Downloads 134 Views
Sega Dreamcast Expansion Bay Replacement

Sega Dreamcast Expansion Bay Replacement Written By: wkwong

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Sega Dreamcast Expansion Bay Replacement

INTRODUCTION A guide to remove the expansion bay from the Sega Dreamcast.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Sega Dreamcast Expansion Bay Replacement

Step 1 — Expansion Bay

 Verify that the console is disconnected from the AC outlet before you begin. 

Flip the console over on its back.



Take note of your model number, in case replacement parts are needed.

Step 2



Remove the expansion bay by applying pressure to the small clip on the expansion bay while prying it away from the console.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 02:51:42 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Sega Dreamcast Expansion Bay Replacement

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4