SKY65162-70LF: 400-2700 MHz Linear Power Amplifier
PRELIMINARY DATA SHEET
SKY65162-70LF: 400-2700 MHz Linear Power Amplifier Applications
GND
UHF television TETRA radios
4
PCS, DCS, 2.5G, 3G handsets ISM band transmitters WCS fixed wireless 802.16 WiMAX 3GPP LTE
Features Wideband frequency range: 400 to 2700 MHz Low Noise Figure: 3.6 dB High OIP3
1
2
RF_IN
GND
3 RF_OUT S244
Figure 1. SKY65162-70LF Pinout – 4-Pin SOT Package (Top View)
Average OP1dB = +28.45 dBm High gain: 24 dB
Description
On-chip bias circuit
Skyworks SKY65162-70LF is a high performance, ultra-wideband Power Amplifier (PA) with superior output power, low noise, high linearity, and high efficiency. The device provides excellent linearity and an average 1 dB Output Compression Point (OP1dB) of +28.45 dBm, making the SKY65162-70LF ideal for use in the driver stage of infrastructure transmit chains.
SOT-89 (4-pin, 2.4 x 4.5 mm) package (MSL1, 260 °C per JEDEC J-STD-020) Skyworks offers lead (Pb)-free RoHS (Restriction of Hazardous Substances) compliant packaging.
The SKY65162-70LF uses low-cost Surface-Mount Technology (SMT) in the form of a 4-pin, 2.4 x 4.5 mm Small Outline Transistor (SOT-89) package. The device package and pinout are shown in Figure 1 and a functional block diagram is provided in Figure 2.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
1
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Active Bias
1
RF_IN
2
3
GND
RF_OUT S669
Figure 2. SKY65162-70LF Functional Block Diagram Table 1. SKY65162-70LF Signal Descriptions Pin #
Name
Description
1
RF_IN
RF input
2
GND
Ground
3
RF_OUT
RF output
4
GND
Ground
Technical Description
Electrical and Mechanical Specifications
The SKY65162-70LF is a single stage, linear PA that operates with a single 5 V power supply connected through an RF choke (inductor L2) to the output signal (pin 3). The bias current is set by the on-chip active bias composed of current mirror and reference voltage transistors, which allow excellent gain tracking over temperature and voltage variations. The device is externally RF matched using surface mount components to facilitate operation over a frequency range of 400 to 2700 MHz.
Signal pin assignments and functional pin descriptions are described in Table 1. The absolute maximum ratings of the SKY65162-70LF are provided in Table 2. The recommended operating conditions are specified in Table 3 and electrical specifications are provided in Tables 4 through 8. Typical performance characteristics of the SKY65162-70LF are illustrated in Figures 3 through 8 (915 MHz), Figures 9 through 13 (1960 MHz), Figures 14 through 17 (2100 MHz), Figures 18 through 25 (2400 MHz), and Figures 26 through 29 (2600 MHz).
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Table 2. SKY65162-70LF Absolute Maximum Ratings Parameter
Max
Units
VCC
6
V
RF output power
POUT
+29
dBm
Supply current
ICC
400
mA
Operating case temperature
TC
–40
+85
°C
Storage temperature
TST
–55
Junction temperature
TJ
Supply voltage
Note:
Symbol
Min
+125
°C
+150
°C
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal values. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SKY65162-70LF Recommended Operating Conditions Parameter
Symbol
Min
Typical 5.0
Supply voltage
VCC
4.75
Operating frequency
f
400
Operating case temperature
TJ
–40
+25
Max
Units
5.5
V
2700
MHz
+85
°C
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
3
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Table 4. SKY65162-70LF Electrical Characteristics (Note 1) (VCC = +5 V, TC = 25 °C, f = 915 MHz, Unless Otherwise Noted) Parameter
Symbol
Test Conditions
Min
Typical
Max
Units
869
915
960
MHz
Frequency
f
Small signal gain
|S21|
Small signal
20
dB
Input return loss
|S11|
Small signal
24
dB
Output return loss
|S22|
Small signal
11
dB
Reverse transmission loss
|S12|
Small signal
32
dB
3rd Order Output Intercept Point
OIP3
POUT = +10 dBm
+43.5
dBm
Noise Figure
NF
4.6
dB
1 dB Output Compression Point
OP1dB
CW
+28.8
dBm
Saturated output power
PSAT
VCC = 5 V
+30.5
dBm
VCC = 4 V
+29.0
dBm
Operational current
IOP
@ P1dB = +28.8 dBm
306
mA
Quiescent current
ICQ
No RF
188
mA
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Typical Performance Characteristics (VCC = +5 V, Tc = 25 °C, f = 915 MHz, Unless Otherwise Noted)
500
22 20
400
Current (mA)
Gain (dB)
18 16 14 12 10 869 MHz 920 MHz 960 MHz
8 6 4 +16
+18
+20
+22
+24
+26
+28
+30
300 200 869 MHz 920 MHz 960 MHz
100 0 +16
+32
+18
+20
+22
+24
+26
+28
+30
+32
Output Power (dBm)
POUT (dBm)
Figure 4. Operating Current vs Output Power Over Frequency
Figure 3. Gain vs Output Power Over Frequency
6.0 5.5
+46
Noise Figure (dB)
5.0
OIP3 (dBm)
+45 +44 +43 +42 869 MHz 920 MHz 960 MHz
+41 +40 +4
4.5 4.0 3.5 3.0 2.5 2.0
+6
+8
+10
+12
+14
+16
+18
Output Power (dBm)
Figure 5. OIP3 vs Output Power Over Frequency
+20
860
880
900
920
940
Figure 6. Noise Figure vs Frequency @ 900 MHz
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4
960
Frequency (MHz)
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
980
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
–50
60
–55
50
–60
ACPR (dBc)
PAE (%)
40 30 20
–65 –70 –75 869 MHz 900 MHz 960 MHz
–80
VCC = 5 V VCC = 4 V
10 0 +6
+8
+10
+12
+14
+16
+18
+20
+22
+24
+26
+28
–85 –90 +10
+30 +32
+12
+14
Output Power (dBm)
+16
+18
+20
Output Power (dBm)
Figure 7. Output Power vs PAE Over Voltage
Figure 8. ACPR vs Output Power Over Frequency (IS95A, 9 Channels Forward)
Table 5. SKY65162-70LF Electrical Characteristics (Note 1) (VCC = +5 V, TC = 25 °C, f = 1960 MHz, Unless Otherwise Noted) Parameter
Symbol
Test Conditions
Min
Typical
Max
Units
1930
1960
1990
MHz
Frequency
f
Small signal gain
|S21|
Small signal
15.1
dB
Input return loss
|S11|
Small signal
24
dB
Output return loss
|S22|
Small signal
25
dB
Reverse transmission loss
|S12|
Small signal
26
dB
1 dB Output Compression Point
OP1dB
CW
+30.2
dBm
3rd Order Output Intercept Point
OIP3
POUT = +10 dBm
+43
dBm
Noise Figure
NF
3.8
dB
Operational current
IOP
@ P1dB = +30.2 dBm
390
mA
Quiescent current
ICQ
No RF
188
mA
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Typical Performance Characteristics (VCC = +5 V, TC = 25 °C, f = 1960 MHz, Unless Otherwise Noted)
18
700
16
600
Current (mA)
Gain (dB)
14 12 10 8 6 1930 MHz 1960 MHz 1990 MHz
4 2 0 +11
+13
+15
+17
+19
+21
+23
+25
+27
+29
+31
POUT (dBm)
Figure 9. Gain vs Output Power Over Frequency
500 400 300 200 1930 MHz 1960 MHz 1990 MHz
100 +33
0 +11
+13
+15
+17
+19
+21
+23
+25
+27
+29
+31
Output Power (dBm)
Figure 10. Operating Current vs Output Power Over Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
5
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
6.0 5.5 +46
Noise Figure (dB)
5.0
OIP3 (dBm)
+45 +44 +43 +42 1930 MHz 1960 MHz 1990 MHz
+41 +40 +4
+6
+8
+10
+12
+14
4.5 4.0 3.5 3.0 2.5
+16
Output Power (dBm)
2.0 1920
1930
1940
1950
1960
1970
1980
Figure 11. OIP3 vs Output Power Over Frequency
Figure 12. Noise Figure vs Frequency @ 1900 MHz
–40
ACLR (dBc)
–45 –50 –55 –60 1930 MHz 1960 MHz 1990 MHz
–65 –70 +12
+14
+16
+18
+20
+22
Output Power (dBm)
Figure 13. ACLR vs Output Power Over Frequency (WCDMA 3GPP, Test Model 1, 64 DPCH)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6
1990
Frequency (MHz)
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
2000
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Table 6. SKY65162-70LF Electrical Characteristics (Note 1) (VCC = +5 V, TC = 25 °C, f = 2100 MHz, Unless Otherwise Noted) Parameter
Symbol
Test Conditions
Min
Typical
Max
Units
2110
2140
2170
MHz
Frequency
f
Small signal gain
|S21|
Small signal
14.3
dB
Input return loss
|S11|
Small signal
20.8
dB
Output return loss
|S22|
Small signal
22
dB
Reverse transmission loss
|S12|
Small signal
25
dB
1 dB Output Compression Point
OP1dB
CW
+29.5
dBm
3rd Order Output Intercept Point
OIP3
POUT = +10 dBm
+43.5
dBm
Noise Figure
NF
3.9
dB
Operational current
IOP
@ P1dB = +29.5 dBm
375
mA
Quiescent current
ICQ
No RF
188
mA
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Typical Performance Characteristics (VCC = +5 V, TC = 25 °C, f = 2100 MHz, Unless Otherwise Noted)
600
16 14
500
Current (mA)
Gain (dB)
12 10 8 6 2110 MHz 2140 MHz 2170 MHz
4 2 0 +11
+13
+15
+17
+19
+21
+23
+25
+27
+29
+31
400 300 200 2110 MHz 2140 MHz 2170 MHz
100 0 +11
+33
+13
+15
+21
+23
+25
+27
+29
+31
–40
+46
–45
ACLR (dBc)
+45
OIP3 (dBm)
+19
Figure 15. Operating Current vs Output Power Over Frequency
Figure 14. Gain vs Output Power Over Frequency
+44 +43 +42 2110 MHz 2140 MHz 2170 MHz
+41 +40 +2
+17
Output Power (dBm)
POUT (dBm)
+4
+6
+8
+10
+12
+14
Output Power (dBm)
Figure 16. OIP3 vs Output Power Over Frequency
+16
–50 –55 –60 2100 MHz 2140 MHz 2170 MHz
–65 –70 +12
+14
+16
+18
+20
+22
Output Power (dBm)
Figure 17. ACLR vs Output Power Over Frequency (WCDMA 3GPP, Test Model 1, 64 DPCH)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
7
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Table 7. SKY65162-70LF Electrical Characteristics (Note 1) (VCC = +5 V, TC = 25 °C, f = 2400 MHz, Unless Otherwise Noted) Parameter
Symbol
Test Conditions
Min
Typical
Max
Units
2300
2400
2500
MHz
Frequency
f
Small signal gain
|S21|
Small signal
13.2
dB
Input return loss
|S11|
Small signal
34
dB
Output return loss
|S22|
Small signal
19
dB
Reverse transmission loss
|S12|
Small signal
25
dB
1 dB Output Compression Point
OP1dB
CW
3rd Order Output Intercept Point
OIP3
Output power
POUT
Noise Figure
NF
Operational current
IOP
Quiescent current
ICQ
+30
dBm
+43.8
dBm
+22
dBm
3.9
dB
@ P1dB = +30 dBm
401
mA
No RF
188
mA
802.11g, 64 QAM, 54 Mbps, 3% EVM
Note 1: Performance is guaranteed only under the conditions listed in this Table.
16
700
14
600
12
500
Current (mA)
Gain (dB)
Typical Performance Characteristics (VCC = +5 V, TC = 25 °C, f = 2400 MHz, Unless Otherwise Noted)
10 8 6 4
2412 MHz 2442 MHz 2472 MHz
2 0 +11
+13
+15
+17
+19
+21
+23
+25
+27
+29
+31
400 300 200 2412 MHz 2442 MHz 2472 MHz
100 0 +11
+33
+13
+15
POUT (dBm)
+17
+19
+21
+23
+25
+27
+29
+31
Output Power (dBm)
Figure 18. Gain vs Output Power Over Frequency
Figure 19. Operating Current vs Output Power Over Frequency
6.0 5.5
+46
Noise Figure (dB)
5.0
OIP3 (dBm)
+45 +44 +43 +42 2412 MHz 2442 MHz 2472 MHz
+41 +40 +2
+4
+6
+8
+10
+12
Output Power (dBm)
Figure 20. OIP3 vs Output Power Over Frequency
4.5 4.0 3.5 3.0 2.5
+14
2.0 2250
2300
2350
2400
2450
Figure 21. Noise Figure vs Frequency @ 2400 MHz
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8
2500
Frequency (MHz)
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
2550
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
8
13.4
2412 MHz 2442 MHz 2462 MHz
7
13.2
6
EVM (%)
Gain (dB)
13.0 12.8 3.3 V 5.0 V
12.6
5 4 3 2
12.4
1
12.2 2400
0
2420
2440
2460
2480
0
+2
+4
+6
+8
+10
+12
+14
+16
+18
+20
+22
+24
+26
Output Power (dBm)
Frequency (MHz)
Figure 23. EVM vs Output Power Over Frequency (802.11g, 64 QAM, 54 Mbps, OFDM)
Figure 22. Gain vs Frequency Over Voltage (802.11g, 64 QAM, 54 Mbps, OFDM)
14
250 12
2412 MHz 2442 MHz 2462 MHz
200
Current (mA)
EVM (%)
10 8 6 4 2
150 100 5.0 V 3.3 V
50
0 0
+2
+4
+6
+8
+10
+12
+14
+16
+18
+20
+22
Output Power (dBm)
Figure 24. EVM vs Output Power Over Frequency (802.11g, 64 QAM, 54 Mbps, OFDM, VCC = 3.3 V)
+24
0
0
+2
+4
+6
+8
+10
+12 +14
+16
+18
+20
+22
+24 +26
Output Power (dBm)
Figure 25. Operating Current vs Output Power Over Voltage (802.11g, 64 QAM, 54 Mbps, OFDM)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
9
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Table 8. SKY65162-70LF Electrical Characteristics (Note 1) (VCC = +5 V, TC = 25 °C, f = 2600 MHz, Unless Otherwise Noted) Parameter
Symbol
Test Conditions
Min
Typical
Max
Units
2500
2600
2700
MHz
Frequency
f
Small signal gain
|S21|
Small signal
12.7
dB
Input return loss
|S11|
Small signal
17
dB
Output return loss
|S22|
Small signal
22
dB
Reverse transmission loss
|S12|
Small signal
25
dB
1 dB Output Compression Point
OP1dB
CW
Saturated output power
PSAT
Saturation current
ISAT
3rd Order Output Intercept Point
OIP3
Noise Figure
NF
Operational current
IOP
Quiescent current
ICQ
+29.6
dBm
+30.4
dBm
@ PSAT = +30.4 dBm
428
mA
POUT = +5 dBm
+44
dBm
3.8
dB
@ P1dB = +29.6 dBm
330
mA
No RF
188
mA
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Typical Performance Characteristics (VCC = +5 V, TC = 25 °C, f = 2600 MHz, Unless Otherwise Noted)
+46
14.0
2500 MHz 2600 MHz 2700 MHz
+45
13.5 13.0
Gain (dB)
OIP3 (dBm)
+44 +43 +42
12.5 12.0 11.5 11.0
+41
10.5 10.0 2450
+40 0
+1
+2
+3
+4
+5
+6
+7
+8
+9
2500
2550
2600
2650
2700
2750
Frequency (MHz)
POUT (dBm)
Figure 27. Gain vs Frequency @ 2600 MHz
Figure 26. OIP3 vs POUT @ 2700 MHz
380
6.0
360 5.5
340
5.0
Noise Figure (dB)
Current (mA)
320 300 280 260 240 220
4.0 3.5 3.0 2.5
200 180 +6
4.5
+8
+10
+12
+14
+16
+18
+20
+22
+24 +26
POUT (dBm)
Figure 28. Current vs POUT @ 2600 MHz
+28
+30
2.0 2450
2500
2550
2600
2650
2750
Figure 29. Noise Figure vs Frequency @ 2600 MHz
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10
2700
Frequency (MHz)
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Evaluation Board Description
Testing Procedure
The Skyworks SKY65162-70LF Evaluation Board is used to test the performance of the SKY65162-70LF PA driver. An assembly drawing for the Evaluation Board is shown in Figure 30 and the layer detail is provided in Figure 31. The layer detail physical characteristics are noted in Figure 32.
Use the following procedure to set up the SKY65162-70LF Evaluation Board for testing:
Capacitors C7, C8, and C9 provide DC bias decoupling for VCC. Pins 1 and 3 are the RF input and output signals, respectively. External DC blocking is required on the input and output, but can be implemented as part of the RF matching circuit. Pin 2 and the package backside metal, pin 4, are ground pins that provide the DC and RF ground, respectively.
1. Connect a 5.0 V supply to VCC. If available, enable the current limiting function of the power supply to 400 mA. 2. Connect a signal generator to the RF signal input port. Set it to the desired RF frequency at a power level of –15 dBm or less to the Evaluation Board but do NOT enable the RF signal. 3. Connect a spectrum analyzer to the RF signal output port. 4. Enable the power supply. 5. Enable the RF signal.
Circuit Design Configurations
6. Take measurements.
The following design considerations are general in nature and must be followed regardless of final use or configuration.
CAUTION: If any of the output signals exceed the rated maximum values, the SKY65162-70LF Evaluation Board can be permanently damaged.
1. Paths to ground should be made as short as possible. 2. The ground pad of the SKY65162-70LF power amplifier has special electrical and thermal grounding requirements. This pad is the main thermal conduit for heat dissipation. Since the circuit board acts as the heat sink, it must shunt as much heat as possible from the amplifier. As such, design the connection to the ground pad to dissipate the maximum wattage produced to the circuit board. Multiple vias to the grounding layer are required. NOTE: Junction temperature (Tj) of the device increases with a poor connection to the slug and ground. This reduces the lifetime of the device. A suggested matching circuit is shown in Figure 33. Component values for the SKY65162-70LF Evaluation Board are shown in Table 9.
Package and Handling Information Since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SKY65162-70LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format.
Package Dimensions Package dimensions for the 4-pin SOT-89 are shown in Figure 34, and tape and reel dimensions are provided in Figure 35.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
11
GND
VCC
GND
GND
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
JP1 R1
C7 C8 C9
J1
C10
C2 C1
C5
L2
C11
C4 C3
J2
C6
S1886
Figure 30. Evaluation Board Assembly Drawing
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Layer 1: Top – Metal
Layer 2: Ground
Layer 3: Ground
Layer 4: Solid Ground Plane S2056
Figure 31. Evaluation Board Layer Detail
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
13
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Cross Section
Name Thickness (mm) Material
εr
Pri
0.036
Cu, 1 oz.
–
Lam1
0.305
Rogers 4003-12-3.38
3.38
L2
0.036
Cu, 1 oz.
–
Lam2
0.102
FR4-4-4.00
4.00
L3
0.036
Cu, 1 oz.
–
Lam3
0.305
FR4-12-4.00
4.00
Sec
0.036
Cu, 1 oz.
– S2045
Figure 32. Layer Detail Physical Characteristics
R1
VCC C9
C8
C7
L2 4
C2
C5
C10 1
RF Input C1
C11
3
RF Output C4
C3
C6
2
NOTE: Some component labels may be different than the corresponding component symbol shown here. Component values, however, are accurate as of the date of this Data Sheet.
S1882a
Figure 33. SKY65162-70LF Evaluation Board Schematic Table 9. SKY65162-70LF (SOT-89 Package) Evaluation Board Bill of Materials Component
Value
Size 915 MHz
1960 MHz
2100 MHz
2400 MHz
C1
0402
4.3 nH
DNI
DNI
DNI
DNI
C2
0402
4.3 pF
1.3 pF
1.0 pF
0.8 pF
0.8 pF
C3
0402
DNI
1.1 pF
0.8 pF
0.4 pF
0.3 pF
C4
0402
DNI
2.7 pF
1.8 pF
1.0 pF
0.9 pF
C5
0402
3.9 nH
3.9 pF
3.0 pF
1.3 pF
1.0 pF
C6
0402
2.4 pF
DNI
DNI
DNI
DNI
C7
0805
1.0 μF
1.0 μF
1.0 μF
1.0 μF
1.0 μF
C8
0402
1000 pF
1000 pF
1000 pF
1000 pF
1000 pF
C9
0402
DNI
DNI
DNI
DNI
DNI
C10
0402
1.5 Ω
DNI
DNI
DNI
DNI
C11
0402
3.6 pF
DNI
DNI
DNI
DNI
L2
0402
8.7 nH
8.7 nH
8.7 nH
8.7 nH
8.7 nH
R1
0402
0Ω
0Ω
0Ω
0Ω
0Ω
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 14
2600 MHz
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
4.50 ± 0.10
0.381 ± 0.025 Sharp
R0.10
R0.25 1.70 ± 0.05
1.50
7o
2.44 ± 0.10
4.09 ± 0.10
0.51 ± 0.10
7o
R0.10 1.04 ± 0.15
0.46 1.50 ± 0.10 0.41
Side View
End View
Bottom View S253
All measurements are in millimeters
Figure 34. SKY65162-70LF (4-Pin SOT-89) Package Dimensions
2.00 ± 0.05 8.00 ± 0.10
4.00 ± 0.10
∅1.50 ± 0.10
1.75 ± 0.10
0.30 ± 0.05
B
Pin #1 Indicator
7° Max
5.50 ± 0.05 12.0 ± 0.30
A
A
4.90 ± 0.10
B 1.90 ± 0.10
∅1.00 Min.
4.60 ± 0.10
B Notes: 1. Carrier tape material: black conductive polycarbonate 2. Cover tape material: transparent conductive PSA 3. Cover tape size: 9.2 mm width 4. All measurements are in millimeters
8° Max S264
Figure 35. SKY65162-70LF Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
15
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Ordering Information Model Name SKY65162-70LF Linear PA
Ordering Part Number SKY65162-70LF
Evaluation Kit Part Number TW18-D220
Copyright © 2010 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 16
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
SKY65162-70LF: 400-2700 MHz Linear Power Amplifier Applications
GND
UHF television TETRA radios
4
PCS, DCS, 2.5G, 3G handsets ISM band transmitters WCS fixed wireless 802.16 WiMAX 3GPP LTE
Features Wideband frequency range: 400 to 2700 MHz Low Noise Figure: 3.6 dB High OIP3
1
2
RF_IN
GND
3 RF_OUT S244
Figure 1. SKY65162-70LF Pinout – 4-Pin SOT Package (Top View)
Average OP1dB = +28.45 dBm High gain: 24 dB
Description
On-chip bias circuit
Skyworks SKY65162-70LF is a high performance, ultra-wideband Power Amplifier (PA) with superior output power, low noise, high linearity, and high efficiency. The device provides excellent linearity and an average 1 dB Output Compression Point (OP1dB) of +28.45 dBm, making the SKY65162-70LF ideal for use in the driver stage of infrastructure transmit chains.
SOT-89 (4-pin, 2.4 x 4.5 mm) package (MSL1, 260 °C per JEDEC J-STD-020) Skyworks offers lead (Pb)-free RoHS (Restriction of Hazardous Substances) compliant packaging.
The SKY65162-70LF uses low-cost Surface-Mount Technology (SMT) in the form of a 4-pin, 2.4 x 4.5 mm Small Outline Transistor (SOT-89) package. The device package and pinout are shown in Figure 1 and a functional block diagram is provided in Figure 2.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
1
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Active Bias
1
RF_IN
2
3
GND
RF_OUT S669
Figure 2. SKY65162-70LF Functional Block Diagram Table 1. SKY65162-70LF Signal Descriptions Pin #
Name
Description
1
RF_IN
RF input
2
GND
Ground
3
RF_OUT
RF output
4
GND
Ground
Technical Description
Electrical and Mechanical Specifications
The SKY65162-70LF is a single stage, linear PA that operates with a single 5 V power supply connected through an RF choke (inductor L2) to the output signal (pin 3). The bias current is set by the on-chip active bias composed of current mirror and reference voltage transistors, which allow excellent gain tracking over temperature and voltage variations. The device is externally RF matched using surface mount components to facilitate operation over a frequency range of 400 to 2700 MHz.
Signal pin assignments and functional pin descriptions are described in Table 1. The absolute maximum ratings of the SKY65162-70LF are provided in Table 2. The recommended operating conditions are specified in Table 3 and electrical specifications are provided in Tables 4 through 8. Typical performance characteristics of the SKY65162-70LF are illustrated in Figures 3 through 8 (915 MHz), Figures 9 through 13 (1960 MHz), Figures 14 through 17 (2100 MHz), Figures 18 through 25 (2400 MHz), and Figures 26 through 29 (2600 MHz).
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Table 2. SKY65162-70LF Absolute Maximum Ratings Parameter
Max
Units
VCC
6
V
RF output power
POUT
+29
dBm
Supply current
ICC
400
mA
Operating case temperature
TC
–40
+85
°C
Storage temperature
TST
–55
Junction temperature
TJ
Supply voltage
Note:
Symbol
Min
+125
°C
+150
°C
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal values. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SKY65162-70LF Recommended Operating Conditions Parameter
Symbol
Min
Typical 5.0
Supply voltage
VCC
4.75
Operating frequency
f
400
Operating case temperature
TJ
–40
+25
Max
Units
5.5
V
2700
MHz
+85
°C
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
3
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Table 4. SKY65162-70LF Electrical Characteristics (Note 1) (VCC = +5 V, TC = 25 °C, f = 915 MHz, Unless Otherwise Noted) Parameter
Symbol
Test Conditions
Min
Typical
Max
Units
869
915
960
MHz
Frequency
f
Small signal gain
|S21|
Small signal
20
dB
Input return loss
|S11|
Small signal
24
dB
Output return loss
|S22|
Small signal
11
dB
Reverse transmission loss
|S12|
Small signal
32
dB
3rd Order Output Intercept Point
OIP3
POUT = +10 dBm
+43.5
dBm
Noise Figure
NF
4.6
dB
1 dB Output Compression Point
OP1dB
CW
+28.8
dBm
Saturated output power
PSAT
VCC = 5 V
+30.5
dBm
VCC = 4 V
+29.0
dBm
Operational current
IOP
@ P1dB = +28.8 dBm
306
mA
Quiescent current
ICQ
No RF
188
mA
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Typical Performance Characteristics (VCC = +5 V, Tc = 25 °C, f = 915 MHz, Unless Otherwise Noted)
500
22 20
400
Current (mA)
Gain (dB)
18 16 14 12 10 869 MHz 920 MHz 960 MHz
8 6 4 +16
+18
+20
+22
+24
+26
+28
+30
300 200 869 MHz 920 MHz 960 MHz
100 0 +16
+32
+18
+20
+22
+24
+26
+28
+30
+32
Output Power (dBm)
POUT (dBm)
Figure 4. Operating Current vs Output Power Over Frequency
Figure 3. Gain vs Output Power Over Frequency
6.0 5.5
+46
Noise Figure (dB)
5.0
OIP3 (dBm)
+45 +44 +43 +42 869 MHz 920 MHz 960 MHz
+41 +40 +4
4.5 4.0 3.5 3.0 2.5 2.0
+6
+8
+10
+12
+14
+16
+18
Output Power (dBm)
Figure 5. OIP3 vs Output Power Over Frequency
+20
860
880
900
920
940
Figure 6. Noise Figure vs Frequency @ 900 MHz
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4
960
Frequency (MHz)
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
980
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
–50
60
–55
50
–60
ACPR (dBc)
PAE (%)
40 30 20
–65 –70 –75 869 MHz 900 MHz 960 MHz
–80
VCC = 5 V VCC = 4 V
10 0 +6
+8
+10
+12
+14
+16
+18
+20
+22
+24
+26
+28
–85 –90 +10
+30 +32
+12
+14
Output Power (dBm)
+16
+18
+20
Output Power (dBm)
Figure 7. Output Power vs PAE Over Voltage
Figure 8. ACPR vs Output Power Over Frequency (IS95A, 9 Channels Forward)
Table 5. SKY65162-70LF Electrical Characteristics (Note 1) (VCC = +5 V, TC = 25 °C, f = 1960 MHz, Unless Otherwise Noted) Parameter
Symbol
Test Conditions
Min
Typical
Max
Units
1930
1960
1990
MHz
Frequency
f
Small signal gain
|S21|
Small signal
15.1
dB
Input return loss
|S11|
Small signal
24
dB
Output return loss
|S22|
Small signal
25
dB
Reverse transmission loss
|S12|
Small signal
26
dB
1 dB Output Compression Point
OP1dB
CW
+30.2
dBm
3rd Order Output Intercept Point
OIP3
POUT = +10 dBm
+43
dBm
Noise Figure
NF
3.8
dB
Operational current
IOP
@ P1dB = +30.2 dBm
390
mA
Quiescent current
ICQ
No RF
188
mA
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Typical Performance Characteristics (VCC = +5 V, TC = 25 °C, f = 1960 MHz, Unless Otherwise Noted)
18
700
16
600
Current (mA)
Gain (dB)
14 12 10 8 6 1930 MHz 1960 MHz 1990 MHz
4 2 0 +11
+13
+15
+17
+19
+21
+23
+25
+27
+29
+31
POUT (dBm)
Figure 9. Gain vs Output Power Over Frequency
500 400 300 200 1930 MHz 1960 MHz 1990 MHz
100 +33
0 +11
+13
+15
+17
+19
+21
+23
+25
+27
+29
+31
Output Power (dBm)
Figure 10. Operating Current vs Output Power Over Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
5
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
6.0 5.5 +46
Noise Figure (dB)
5.0
OIP3 (dBm)
+45 +44 +43 +42 1930 MHz 1960 MHz 1990 MHz
+41 +40 +4
+6
+8
+10
+12
+14
4.5 4.0 3.5 3.0 2.5
+16
Output Power (dBm)
2.0 1920
1930
1940
1950
1960
1970
1980
Figure 11. OIP3 vs Output Power Over Frequency
Figure 12. Noise Figure vs Frequency @ 1900 MHz
–40
ACLR (dBc)
–45 –50 –55 –60 1930 MHz 1960 MHz 1990 MHz
–65 –70 +12
+14
+16
+18
+20
+22
Output Power (dBm)
Figure 13. ACLR vs Output Power Over Frequency (WCDMA 3GPP, Test Model 1, 64 DPCH)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6
1990
Frequency (MHz)
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
2000
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Table 6. SKY65162-70LF Electrical Characteristics (Note 1) (VCC = +5 V, TC = 25 °C, f = 2100 MHz, Unless Otherwise Noted) Parameter
Symbol
Test Conditions
Min
Typical
Max
Units
2110
2140
2170
MHz
Frequency
f
Small signal gain
|S21|
Small signal
14.3
dB
Input return loss
|S11|
Small signal
20.8
dB
Output return loss
|S22|
Small signal
22
dB
Reverse transmission loss
|S12|
Small signal
25
dB
1 dB Output Compression Point
OP1dB
CW
+29.5
dBm
3rd Order Output Intercept Point
OIP3
POUT = +10 dBm
+43.5
dBm
Noise Figure
NF
3.9
dB
Operational current
IOP
@ P1dB = +29.5 dBm
375
mA
Quiescent current
ICQ
No RF
188
mA
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Typical Performance Characteristics (VCC = +5 V, TC = 25 °C, f = 2100 MHz, Unless Otherwise Noted)
600
16 14
500
Current (mA)
Gain (dB)
12 10 8 6 2110 MHz 2140 MHz 2170 MHz
4 2 0 +11
+13
+15
+17
+19
+21
+23
+25
+27
+29
+31
400 300 200 2110 MHz 2140 MHz 2170 MHz
100 0 +11
+33
+13
+15
+21
+23
+25
+27
+29
+31
–40
+46
–45
ACLR (dBc)
+45
OIP3 (dBm)
+19
Figure 15. Operating Current vs Output Power Over Frequency
Figure 14. Gain vs Output Power Over Frequency
+44 +43 +42 2110 MHz 2140 MHz 2170 MHz
+41 +40 +2
+17
Output Power (dBm)
POUT (dBm)
+4
+6
+8
+10
+12
+14
Output Power (dBm)
Figure 16. OIP3 vs Output Power Over Frequency
+16
–50 –55 –60 2100 MHz 2140 MHz 2170 MHz
–65 –70 +12
+14
+16
+18
+20
+22
Output Power (dBm)
Figure 17. ACLR vs Output Power Over Frequency (WCDMA 3GPP, Test Model 1, 64 DPCH)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
7
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Table 7. SKY65162-70LF Electrical Characteristics (Note 1) (VCC = +5 V, TC = 25 °C, f = 2400 MHz, Unless Otherwise Noted) Parameter
Symbol
Test Conditions
Min
Typical
Max
Units
2300
2400
2500
MHz
Frequency
f
Small signal gain
|S21|
Small signal
13.2
dB
Input return loss
|S11|
Small signal
34
dB
Output return loss
|S22|
Small signal
19
dB
Reverse transmission loss
|S12|
Small signal
25
dB
1 dB Output Compression Point
OP1dB
CW
3rd Order Output Intercept Point
OIP3
Output power
POUT
Noise Figure
NF
Operational current
IOP
Quiescent current
ICQ
+30
dBm
+43.8
dBm
+22
dBm
3.9
dB
@ P1dB = +30 dBm
401
mA
No RF
188
mA
802.11g, 64 QAM, 54 Mbps, 3% EVM
Note 1: Performance is guaranteed only under the conditions listed in this Table.
16
700
14
600
12
500
Current (mA)
Gain (dB)
Typical Performance Characteristics (VCC = +5 V, TC = 25 °C, f = 2400 MHz, Unless Otherwise Noted)
10 8 6 4
2412 MHz 2442 MHz 2472 MHz
2 0 +11
+13
+15
+17
+19
+21
+23
+25
+27
+29
+31
400 300 200 2412 MHz 2442 MHz 2472 MHz
100 0 +11
+33
+13
+15
POUT (dBm)
+17
+19
+21
+23
+25
+27
+29
+31
Output Power (dBm)
Figure 18. Gain vs Output Power Over Frequency
Figure 19. Operating Current vs Output Power Over Frequency
6.0 5.5
+46
Noise Figure (dB)
5.0
OIP3 (dBm)
+45 +44 +43 +42 2412 MHz 2442 MHz 2472 MHz
+41 +40 +2
+4
+6
+8
+10
+12
Output Power (dBm)
Figure 20. OIP3 vs Output Power Over Frequency
4.5 4.0 3.5 3.0 2.5
+14
2.0 2250
2300
2350
2400
2450
Figure 21. Noise Figure vs Frequency @ 2400 MHz
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8
2500
Frequency (MHz)
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
2550
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
8
13.4
2412 MHz 2442 MHz 2462 MHz
7
13.2
6
EVM (%)
Gain (dB)
13.0 12.8 3.3 V 5.0 V
12.6
5 4 3 2
12.4
1
12.2 2400
0
2420
2440
2460
2480
0
+2
+4
+6
+8
+10
+12
+14
+16
+18
+20
+22
+24
+26
Output Power (dBm)
Frequency (MHz)
Figure 23. EVM vs Output Power Over Frequency (802.11g, 64 QAM, 54 Mbps, OFDM)
Figure 22. Gain vs Frequency Over Voltage (802.11g, 64 QAM, 54 Mbps, OFDM)
14
250 12
2412 MHz 2442 MHz 2462 MHz
200
Current (mA)
EVM (%)
10 8 6 4 2
150 100 5.0 V 3.3 V
50
0 0
+2
+4
+6
+8
+10
+12
+14
+16
+18
+20
+22
Output Power (dBm)
Figure 24. EVM vs Output Power Over Frequency (802.11g, 64 QAM, 54 Mbps, OFDM, VCC = 3.3 V)
+24
0
0
+2
+4
+6
+8
+10
+12 +14
+16
+18
+20
+22
+24 +26
Output Power (dBm)
Figure 25. Operating Current vs Output Power Over Voltage (802.11g, 64 QAM, 54 Mbps, OFDM)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
9
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Table 8. SKY65162-70LF Electrical Characteristics (Note 1) (VCC = +5 V, TC = 25 °C, f = 2600 MHz, Unless Otherwise Noted) Parameter
Symbol
Test Conditions
Min
Typical
Max
Units
2500
2600
2700
MHz
Frequency
f
Small signal gain
|S21|
Small signal
12.7
dB
Input return loss
|S11|
Small signal
17
dB
Output return loss
|S22|
Small signal
22
dB
Reverse transmission loss
|S12|
Small signal
25
dB
1 dB Output Compression Point
OP1dB
CW
Saturated output power
PSAT
Saturation current
ISAT
3rd Order Output Intercept Point
OIP3
Noise Figure
NF
Operational current
IOP
Quiescent current
ICQ
+29.6
dBm
+30.4
dBm
@ PSAT = +30.4 dBm
428
mA
POUT = +5 dBm
+44
dBm
3.8
dB
@ P1dB = +29.6 dBm
330
mA
No RF
188
mA
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Typical Performance Characteristics (VCC = +5 V, TC = 25 °C, f = 2600 MHz, Unless Otherwise Noted)
+46
14.0
2500 MHz 2600 MHz 2700 MHz
+45
13.5 13.0
Gain (dB)
OIP3 (dBm)
+44 +43 +42
12.5 12.0 11.5 11.0
+41
10.5 10.0 2450
+40 0
+1
+2
+3
+4
+5
+6
+7
+8
+9
2500
2550
2600
2650
2700
2750
Frequency (MHz)
POUT (dBm)
Figure 27. Gain vs Frequency @ 2600 MHz
Figure 26. OIP3 vs POUT @ 2700 MHz
380
6.0
360 5.5
340
5.0
Noise Figure (dB)
Current (mA)
320 300 280 260 240 220
4.0 3.5 3.0 2.5
200 180 +6
4.5
+8
+10
+12
+14
+16
+18
+20
+22
+24 +26
POUT (dBm)
Figure 28. Current vs POUT @ 2600 MHz
+28
+30
2.0 2450
2500
2550
2600
2650
2750
Figure 29. Noise Figure vs Frequency @ 2600 MHz
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10
2700
Frequency (MHz)
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Evaluation Board Description
Testing Procedure
The Skyworks SKY65162-70LF Evaluation Board is used to test the performance of the SKY65162-70LF PA driver. An assembly drawing for the Evaluation Board is shown in Figure 30 and the layer detail is provided in Figure 31. The layer detail physical characteristics are noted in Figure 32.
Use the following procedure to set up the SKY65162-70LF Evaluation Board for testing:
Capacitors C7, C8, and C9 provide DC bias decoupling for VCC. Pins 1 and 3 are the RF input and output signals, respectively. External DC blocking is required on the input and output, but can be implemented as part of the RF matching circuit. Pin 2 and the package backside metal, pin 4, are ground pins that provide the DC and RF ground, respectively.
1. Connect a 5.0 V supply to VCC. If available, enable the current limiting function of the power supply to 400 mA. 2. Connect a signal generator to the RF signal input port. Set it to the desired RF frequency at a power level of –15 dBm or less to the Evaluation Board but do NOT enable the RF signal. 3. Connect a spectrum analyzer to the RF signal output port. 4. Enable the power supply. 5. Enable the RF signal.
Circuit Design Configurations
6. Take measurements.
The following design considerations are general in nature and must be followed regardless of final use or configuration.
CAUTION: If any of the output signals exceed the rated maximum values, the SKY65162-70LF Evaluation Board can be permanently damaged.
1. Paths to ground should be made as short as possible. 2. The ground pad of the SKY65162-70LF power amplifier has special electrical and thermal grounding requirements. This pad is the main thermal conduit for heat dissipation. Since the circuit board acts as the heat sink, it must shunt as much heat as possible from the amplifier. As such, design the connection to the ground pad to dissipate the maximum wattage produced to the circuit board. Multiple vias to the grounding layer are required. NOTE: Junction temperature (Tj) of the device increases with a poor connection to the slug and ground. This reduces the lifetime of the device. A suggested matching circuit is shown in Figure 33. Component values for the SKY65162-70LF Evaluation Board are shown in Table 9.
Package and Handling Information Since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SKY65162-70LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format.
Package Dimensions Package dimensions for the 4-pin SOT-89 are shown in Figure 34, and tape and reel dimensions are provided in Figure 35.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
11
GND
VCC
GND
GND
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
JP1 R1
C7 C8 C9
J1
C10
C2 C1
C5
L2
C11
C4 C3
J2
C6
S1886
Figure 30. Evaluation Board Assembly Drawing
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Layer 1: Top – Metal
Layer 2: Ground
Layer 3: Ground
Layer 4: Solid Ground Plane S2056
Figure 31. Evaluation Board Layer Detail
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
13
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Cross Section
Name Thickness (mm) Material
εr
Pri
0.036
Cu, 1 oz.
–
Lam1
0.305
Rogers 4003-12-3.38
3.38
L2
0.036
Cu, 1 oz.
–
Lam2
0.102
FR4-4-4.00
4.00
L3
0.036
Cu, 1 oz.
–
Lam3
0.305
FR4-12-4.00
4.00
Sec
0.036
Cu, 1 oz.
– S2045
Figure 32. Layer Detail Physical Characteristics
R1
VCC C9
C8
C7
L2 4
C2
C5
C10 1
RF Input C1
C11
3
RF Output C4
C3
C6
2
NOTE: Some component labels may be different than the corresponding component symbol shown here. Component values, however, are accurate as of the date of this Data Sheet.
S1882a
Figure 33. SKY65162-70LF Evaluation Board Schematic Table 9. SKY65162-70LF (SOT-89 Package) Evaluation Board Bill of Materials Component
Value
Size 915 MHz
1960 MHz
2100 MHz
2400 MHz
C1
0402
4.3 nH
DNI
DNI
DNI
DNI
C2
0402
4.3 pF
1.3 pF
1.0 pF
0.8 pF
0.8 pF
C3
0402
DNI
1.1 pF
0.8 pF
0.4 pF
0.3 pF
C4
0402
DNI
2.7 pF
1.8 pF
1.0 pF
0.9 pF
C5
0402
3.9 nH
3.9 pF
3.0 pF
1.3 pF
1.0 pF
C6
0402
2.4 pF
DNI
DNI
DNI
DNI
C7
0805
1.0 μF
1.0 μF
1.0 μF
1.0 μF
1.0 μF
C8
0402
1000 pF
1000 pF
1000 pF
1000 pF
1000 pF
C9
0402
DNI
DNI
DNI
DNI
DNI
C10
0402
1.5 Ω
DNI
DNI
DNI
DNI
C11
0402
3.6 pF
DNI
DNI
DNI
DNI
L2
0402
8.7 nH
8.7 nH
8.7 nH
8.7 nH
8.7 nH
R1
0402
0Ω
0Ω
0Ω
0Ω
0Ω
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 14
2600 MHz
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
4.50 ± 0.10
0.381 ± 0.025 Sharp
R0.10
R0.25 1.70 ± 0.05
1.50
7o
2.44 ± 0.10
4.09 ± 0.10
0.51 ± 0.10
7o
R0.10 1.04 ± 0.15
0.46 1.50 ± 0.10 0.41
Side View
End View
Bottom View S253
All measurements are in millimeters
Figure 34. SKY65162-70LF (4-Pin SOT-89) Package Dimensions
2.00 ± 0.05 8.00 ± 0.10
4.00 ± 0.10
∅1.50 ± 0.10
1.75 ± 0.10
0.30 ± 0.05
B
Pin #1 Indicator
7° Max
5.50 ± 0.05 12.0 ± 0.30
A
A
4.90 ± 0.10
B 1.90 ± 0.10
∅1.00 Min.
4.60 ± 0.10
B Notes: 1. Carrier tape material: black conductive polycarbonate 2. Cover tape material: transparent conductive PSA 3. Cover tape size: 9.2 mm width 4. All measurements are in millimeters
8° Max S264
Figure 35. SKY65162-70LF Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201212D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 23, 2010
15
PRELIMINARY DATA SHEET • SKY65162-70LF LINEAR PA
Ordering Information Model Name SKY65162-70LF Linear PA
Ordering Part Number SKY65162-70LF
Evaluation Kit Part Number TW18-D220
Copyright © 2010 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 16
August 23, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201212D
