Sony Ericsson Xperia X10 Camera Replacement
Sony Ericsson Xperia X10 Camera Replacement
Sony Ericsson Xperia X10 Camera Replacement User should be able to disassemble phone, locate camera component if necessary.
Written By: Bryan
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Sony Ericsson Xperia X10 Camera Replacement
TOOLS: Flathead Screwdriver (1) T6 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Sony Ericsson Xperia X10 Camera Replacement
Step 1 — Camera
To access the internal components, such as the camera, we need to flip the phone with the screen facing down. Once this is done remove the battery.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Remove eight 5mm screws as shown in the image. Use a T-6 bit.
Page 3 of 6
Sony Ericsson Xperia X10 Camera Replacement
Step 3
Using a case opener, start on the bottom right side of the phone and undo clips located at the interior sides. Repeat this step for the left side.
Once the clips are undone the back casing should dislocate and reveal the internal components of the phone. Camera location is identified on the image.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Sony Ericsson Xperia X10 Camera Replacement
Step 5
To remove the internal case surrounding the camera, apply pressure on the left side of internal casing and using a flat head screw driver unlatch both clips on the right side of casing. Once lifted detach ribbon cable with flat head screwdriver.
Step 6
Once the interior casing is removed, dislocate the hardware by unlatching clip at shown location.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Sony Ericsson Xperia X10 Camera Replacement
Step 7
To remove damaged camera flip hardware so the lens of the camera is facing downwards and remove ribbon cable connecting camera to hardware.
Once camera is removed, insert new functional camera part and reassemble
Step 8
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-22 12:30:46 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
Sony Ericsson Xperia X10 Camera Replacement User should be able to disassemble phone, locate camera component if necessary.
Written By: Bryan
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Sony Ericsson Xperia X10 Camera Replacement
TOOLS: Flathead Screwdriver (1) T6 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Sony Ericsson Xperia X10 Camera Replacement
Step 1 — Camera
To access the internal components, such as the camera, we need to flip the phone with the screen facing down. Once this is done remove the battery.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Remove eight 5mm screws as shown in the image. Use a T-6 bit.
Page 3 of 6
Sony Ericsson Xperia X10 Camera Replacement
Step 3
Using a case opener, start on the bottom right side of the phone and undo clips located at the interior sides. Repeat this step for the left side.
Once the clips are undone the back casing should dislocate and reveal the internal components of the phone. Camera location is identified on the image.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Sony Ericsson Xperia X10 Camera Replacement
Step 5
To remove the internal case surrounding the camera, apply pressure on the left side of internal casing and using a flat head screw driver unlatch both clips on the right side of casing. Once lifted detach ribbon cable with flat head screwdriver.
Step 6
Once the interior casing is removed, dislocate the hardware by unlatching clip at shown location.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Sony Ericsson Xperia X10 Camera Replacement
Step 7
To remove damaged camera flip hardware so the lens of the camera is facing downwards and remove ribbon cable connecting camera to hardware.
Once camera is removed, insert new functional camera part and reassemble
Step 8
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-22 12:30:46 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
