special application fittings - Kelly and Hayes
Goto to Main PDF Menu
SPECIAL APPLICATION FITTINGS
1 5/8" Channels
FOR 15⁄8" (41 MM) WIDTH SERIES CHANNEL
CHANNEL TROLLEY SUPPORT
P1834
1 Hole 9 ⁄16" (14.3) Dia.
5
1 ⁄8" (41.3) Requires ⁄ " x 2 1⁄2" 3 Bolt and ⁄8" Nut (not included) 38
Nuts & Hardware
CHANNEL TROLLEY SUPPORT 1 Hole 9 3 1⁄2" ⁄16" (14.3) Dia. (88.9)
P1834 A
3
3 ⁄4" (95.3)
Requires 3⁄8" x 2 1⁄2" Bolt and 3⁄8" Nut (not included)
3 3⁄4" (95.3)
2 Holes 7 ⁄16" (11.1) Dia.
General Fittings
2 Holes 7 ⁄16" (11.1) Dia.
1" (25.4)
See page 122 for trolleys.
Design Load 1200 Lbs (5.3 kN)
1"
Wt/C 220 Lbs (99.8 kg)
ADJUSTABLE HINGE CONNECTION
P1843
Electrical Fittings
Pipe/Conduit Supports
Wt/C 102 Lbs (46.3 kg)
ADJUSTABLE HINGE CONNECTION
P1354
2 1⁄8"
4" (101.6)
(54.0)
2 1⁄8"
4"
(54.0)
Concrete Inserts
(101.6)
Wt/C 68 Lbs (30.8 kg)
11⁄4" Framing System
Design Load 2500 Lbs (11.1 kN)
(25.4)
See page 122 for trolleys.
P5349
Wt/C 109 Lbs (49.4 kg) CURTAIN SLIDER
P1201 P1202 P1203
LADDER RUNG
1 5⁄ 8"
13⁄16"
Framing System
(41.3)
1 5⁄8"
13
(41.3)
(20.6)
7
2 Holes 9 ⁄32" (7.1) Dia.
⁄8"
(22.2)
A 13
⁄16"
⁄16"
(20.6)
5
⁄16"
Spec. Metals & Fiberglass
(7.9) Design Load 20 Lbs (.1 kN)
P1201 P1202 P1203
Wt/C 6.5 Lbs (2.9 kg)
Index
Part Number
"A"
Weight/C
In
mm
Lbs
kg
12 15 18
304.8 381.0 457.2
186 221 254
84.4 100.2 115.2
Hole Size
Hole Spacing
Width
Thickness
9⁄16" Diameter 14.3 mm
13⁄16" (20.6 mm) From End 17⁄8" (47.6 mm) On Center
15⁄8" 41.3 mm
14
⁄" 6.4 mm
124
Return to #12 TOC
Return to Fittings TOC
Goto to Main PDF Menu
GENERAL FITTINGS
Electrical Fittings
Pipe/Conduit Supports
General Fittings
Nuts & Hardware
1 5/8" Channels
FOR 15⁄8" (41 MM) WIDTH SERIES CHANNEL
Page Flat Plate Fittings
82
Ninety Degree Fittings
86
Angular Fittings
93
“Z” Shape Fittings
94
“U” Shape Fittings
96
Wing Shape Fittings
101
Post Bases Brackets and Braces Beam Clamps Trolleys Special Application Fittings
Index
Spec. Metals & Fiberglass
13⁄16"
Framing System
11⁄4" Framing System
Concrete Inserts
End Caps Partition and Display Fittings
105 106 112 122 124 126 127
MATERIAL Fittings, unless noted, are made from hot-rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576, A635, or A36. The fitting steel also meets the physical requirements of ASTM A570 GR 33. The pickling of the steel produces a smooth surface free from scale. Many fittings are also available in stainless steel, aluminum and fiberglass. Consult factory for ordering information. FINISHES Fittings are available in: PermaGreen II (GR), electro-galvanized
(EG), conforming to ASTM B633 Type III SC1; Hot-dipped galvanized (HG), conforming to ASTM A123 or A153 and plain (PL). APPLICATION All parts drawings illustrate only one application of each fitting. In most cases many other applications are possible. The channels shown in the illustrations are P1000, 15⁄8" square, except where noted otherwise. All 9⁄16" diameter holes use 1 ⁄2" x 15⁄16" hex head cap screws and 1⁄2" nuts – P1010, P4010 or P5510 – depending on the channel used. Nuts and bolts are not included with the fitting and must be ordered separately.
DESIGN BOLT TORQUE BOLT SIZE FOOT LBS. N.m
1⁄4" 20
5
⁄8"
5⁄16" 18
3⁄8" 16
1⁄2" 13
11
3⁄4" 10
6
11
19
50
100
125
8
15
25
70
135
170
DIMENSIONS Imperial dimensions are illustrated in inches. Metric dimensions are shown in parenthesis or as noted. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place. DESIGN LOAD Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5, unless otherwise noted.
80
Return to #12 TOC
SPECIAL APPLICATION FITTINGS
1 5/8" Channels
FOR 15⁄8" (41 MM) WIDTH SERIES CHANNEL
CHANNEL TROLLEY SUPPORT
P1834
1 Hole 9 ⁄16" (14.3) Dia.
5
1 ⁄8" (41.3) Requires ⁄ " x 2 1⁄2" 3 Bolt and ⁄8" Nut (not included) 38
Nuts & Hardware
CHANNEL TROLLEY SUPPORT 1 Hole 9 3 1⁄2" ⁄16" (14.3) Dia. (88.9)
P1834 A
3
3 ⁄4" (95.3)
Requires 3⁄8" x 2 1⁄2" Bolt and 3⁄8" Nut (not included)
3 3⁄4" (95.3)
2 Holes 7 ⁄16" (11.1) Dia.
General Fittings
2 Holes 7 ⁄16" (11.1) Dia.
1" (25.4)
See page 122 for trolleys.
Design Load 1200 Lbs (5.3 kN)
1"
Wt/C 220 Lbs (99.8 kg)
ADJUSTABLE HINGE CONNECTION
P1843
Electrical Fittings
Pipe/Conduit Supports
Wt/C 102 Lbs (46.3 kg)
ADJUSTABLE HINGE CONNECTION
P1354
2 1⁄8"
4" (101.6)
(54.0)
2 1⁄8"
4"
(54.0)
Concrete Inserts
(101.6)
Wt/C 68 Lbs (30.8 kg)
11⁄4" Framing System
Design Load 2500 Lbs (11.1 kN)
(25.4)
See page 122 for trolleys.
P5349
Wt/C 109 Lbs (49.4 kg) CURTAIN SLIDER
P1201 P1202 P1203
LADDER RUNG
1 5⁄ 8"
13⁄16"
Framing System
(41.3)
1 5⁄8"
13
(41.3)
(20.6)
7
2 Holes 9 ⁄32" (7.1) Dia.
⁄8"
(22.2)
A 13
⁄16"
⁄16"
(20.6)
5
⁄16"
Spec. Metals & Fiberglass
(7.9) Design Load 20 Lbs (.1 kN)
P1201 P1202 P1203
Wt/C 6.5 Lbs (2.9 kg)
Index
Part Number
"A"
Weight/C
In
mm
Lbs
kg
12 15 18
304.8 381.0 457.2
186 221 254
84.4 100.2 115.2
Hole Size
Hole Spacing
Width
Thickness
9⁄16" Diameter 14.3 mm
13⁄16" (20.6 mm) From End 17⁄8" (47.6 mm) On Center
15⁄8" 41.3 mm
14
⁄" 6.4 mm
124
Return to #12 TOC
Return to Fittings TOC
Goto to Main PDF Menu
GENERAL FITTINGS
Electrical Fittings
Pipe/Conduit Supports
General Fittings
Nuts & Hardware
1 5/8" Channels
FOR 15⁄8" (41 MM) WIDTH SERIES CHANNEL
Page Flat Plate Fittings
82
Ninety Degree Fittings
86
Angular Fittings
93
“Z” Shape Fittings
94
“U” Shape Fittings
96
Wing Shape Fittings
101
Post Bases Brackets and Braces Beam Clamps Trolleys Special Application Fittings
Index
Spec. Metals & Fiberglass
13⁄16"
Framing System
11⁄4" Framing System
Concrete Inserts
End Caps Partition and Display Fittings
105 106 112 122 124 126 127
MATERIAL Fittings, unless noted, are made from hot-rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576, A635, or A36. The fitting steel also meets the physical requirements of ASTM A570 GR 33. The pickling of the steel produces a smooth surface free from scale. Many fittings are also available in stainless steel, aluminum and fiberglass. Consult factory for ordering information. FINISHES Fittings are available in: PermaGreen II (GR), electro-galvanized
(EG), conforming to ASTM B633 Type III SC1; Hot-dipped galvanized (HG), conforming to ASTM A123 or A153 and plain (PL). APPLICATION All parts drawings illustrate only one application of each fitting. In most cases many other applications are possible. The channels shown in the illustrations are P1000, 15⁄8" square, except where noted otherwise. All 9⁄16" diameter holes use 1 ⁄2" x 15⁄16" hex head cap screws and 1⁄2" nuts – P1010, P4010 or P5510 – depending on the channel used. Nuts and bolts are not included with the fitting and must be ordered separately.
DESIGN BOLT TORQUE BOLT SIZE FOOT LBS. N.m
1⁄4" 20
5
⁄8"
5⁄16" 18
3⁄8" 16
1⁄2" 13
11
3⁄4" 10
6
11
19
50
100
125
8
15
25
70
135
170
DIMENSIONS Imperial dimensions are illustrated in inches. Metric dimensions are shown in parenthesis or as noted. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place. DESIGN LOAD Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5, unless otherwise noted.
80
Return to #12 TOC
