Submittal Transmittal
Submittal Transmittal Moseley Architects | 3000 RDU Center Drive Suite 217, Morrisville NC 27560
PROJECT:
Brooks Elementary School Renovation 546152
DATE SENT:
SUBJECT:
230513-3 Enclosed Motor Controllers PD--for Approval
SUBMITTAL ID:
00041
TYPE:
Submittal
TRANSMITTAL ID:
00079
PURPOSE:
For Review
VIA:
Info Exchange
SPEC SECTION:
23 05 13
8/5/2016
RETURN BY:
FROM NAME
COMPANY
EMAIL
PHONE
Jessica Hill
Moseley Architects
[email protected] om
(919) 8400091 x9071
NAME
COMPANY
EMAIL
PHONE
Danielle Baker
Progressive Design Collaborative, Ltd.
[email protected]
(919) 7909989
Josh Alexander
PDC
[email protected]
Dan Bryant
Wake County Schools, NC
[email protected]
Fitzgerald Eric
Wake County Schools, NC
[email protected]
Kevin Short
Facility Dynamics
kshortt@facilitydynamics. com
TO
DESCRIPTION OF CONTENTS QTY
DATED
1
8/2/2016
TITLE
NUMBER
NOTES
230513-3 Enclosed Motor Controllers PD--for Approval.pdf
Page 1 of 1
ARCHITECT'S SUBMITTAL REVIEW Project: Brooks Elementary School Renovation - 546152
Date: 8/15/2016
Submittal No.: 0231.5 - DIV 23 - 0 Submittal Description: Enclosed Motor Controllers Reviewed By: Stephen Nally The following notes and Action ID's shall apply to this submittal:
Notes This review and these notes are subject to the limitations indicated in the General Conditions of the Contract for Construction, and as follows: (1) Architect’s review is for the limited purpose of checking for conformance with information given and the design concept expressed in the Contract Documents; (2) Architect’s review is not conducted for the purpose of determining the accuracy and completeness of other details such as dimensions and quantities, or for substantiating instructions for installation or performance of equipment or systems, all of which shall remain the responsibility of the Contractor as required by the Contract Documents; (3) Architect’s review shall not constitute approval of safety precautions or of any construction means, methods, techniques, sequences, or procedures; and (4) Architect’s approval or approval as noted of a specific item shall not indicate approval or approval as noted of an assembly of which the item is a component Notes related to this submittal do not relieve the Contractor from complying with the requirements of the Contract Documents. The Contractor shall verify that all necessary approvals as noted are obtained prior to proceeding with the fabrication, manufacturing, purchasing, and/or construction of any item, component, system, or assembly. The Contractor’s responsibilities include, but are not limited to, the following: (1) Correlation and confirmation of dimensions; (2) Information that pertains to the fabrication processes and/or to the means, methods, techniques, sequences, and procedures of construction; (3) Coordination of the Work of all trades; and (4) Performance of all Work in a safe and satisfactory manner If this submittal contains deviations from the Contract Documents, it is the responsibility of the Contractor to specifically inform the Architect in writing of all such deviations; and all such deviations shall be incorporated into the Contract Documents by the issuance of one of the following authorizing such deviations, prior to proceeding with fabrication, manufacture and/or construction: (1) Field Clarification (or other form used to convey minor changes to the Work); (2) Change Order; or (3) Construction Change Directive
Specification Description Section 230513 Product Data
File Code: C7 Submittals
Notes
Action ID C
P.1 of 2
Notes Regarding Submittal Review Action ID: B.
Approved as Noted: The Contractor is advised that fabrication, manufacturing, purchasing, and/or construction may proceed based on this submittal provided that the work is in full compliance with the Contract Documents.
C.
Revise and Resubmit: The Contractor is advised that fabrication, manufacturing, purchasing, and/or construction may not proceed based on this submittal, and that a revised submittal based on the Notes herein and in full compliance with the Contract Documents, shall be made to the Architect – until such time the Action ID – Approved as Noted is received from the Architect.
D.
Rejected / Resubmit: The Contractor is advised that fabrication, manufacturing, purchasing, and/or construction may not proceed based on this submittal and a new submittal shall be made to the Architect – until such time the Action ID – Approved as Noted is received from the Architect.
E.
Color Selection Required: The Contractor is advised that color selections for the entire project, or portion thereof, will be provided after receipt of all color charts / samples required for the Project.
F.
Not Reviewed: The Contractor is advised that this submittal has not been reviewed.
G.
Not Submitted: Contractor is advised that the Contract Documents require a submittal for this Work. A submittal for this Work shall be made by the Contractor which shall receive the Action ID – Approved as Noted prior to proceeding with any fabrication, manufacturing, purchasing, and/or construction.
File Code: C7 Submittals
P.2 of 2
Submittal #230513-3.0 230513 - Enclosed Motor Controllers Project: 16-2003 - Brooks Elementary School
Bordeaux Construction 135 E. Martin St. 101 Raleigh, North Carolina 27601 Phone: (919) 220-1141
Manual Motor Starters PD SPEC SECTION:
230513 - Enclosed Motor Controllers
CREATED BY:
Keifer Ewing (Bordeaux Construction)
STATUS:
Open
DATE CREATED:
08/02/2016
ISSUE DATE:
08/02/2016
REVISION:
0
RESPONSIBLE CONTRACTOR:
Nationwide Electrical Services
RECEIVED FROM:
RECEIVED DATE: //
SUBMIT BY:
//
FINAL DUE DATE: //
LOCATION:
TYPE:
COST CODE: Ben Warren (Bordeaux Construction), Jessica Hill (Moseley Architects - Morrisville)
APPROVERS:
General Contractor's Approval: Except as otherwise noted herein; the submittal has been checked and conformed to our interpretation of applicable requirements of job plans and specifications.: BALL IN COURT: Jessica Hill (Moseley Architects - Morrisville) DISTRIBUTION: DESCRIPTION: ATTACHMENTS:
SUBMITTAL WORKFLOW #
SUBMITTER/ APPROVER
NAME
1
Ben Warren
Approver
2
Jessica Hill
Approver
SENT DATE
DUE DATE
RETURNED RESPONSE DATE 8/2/2016
8/2/2016
Approved
ATTACHMENTS
COMMENTS
230513-3 Manual Motor Starters.pdf
Pending
NOTES: Specify each piece of equipment that is getting one of these 112 starters. Drawings state that externally furnished starters to be
X
8/12/16
BY
Bordeaux Construction
SLE
provided by Mechanical Contractor however these don't appear to be supplied by Mechanical Contractor. Coordinate starter with Electrical Contractor.
DATE
COPIES TO
Page 1 of 1
Printed On: 08/02/2016 01 :31 PM
Starter Bill of Material
gimagination at work
Speedi Version:
V 11.60
Bill of Material
Brooks Elem. School Quote #: Revision #:
S088607 3.0
_____________________________________________________________________________________________________________________________
Item# Qty Description _____________________________________________________________________________________________________________________________
36 97 Manual Motor Starter CR101Y11 Manual Motor Starter 101 Horse Power : 1 Voltage : 115V(AC) Phase : Single Phase Poles : Single Pole Type : Single-Speed Operator Type : Toggle Operated Enclosure : NEMA Type 1 Light Options : Indicating Light No Late Point Modification - Factory Assembled Accessories : 1 Heater Catalog Number : CR123H082A Heaters Full Load Amps : 0.71 Heaters Quantity : 1 Wiring Diagram : 55-184768
37 15 Manual Motor Starter CR1062R2AAT202R Manual Motor Starters 1062 Horse Power : 2 Voltage : 277V Phase : Single Phase (AC) Overload : Yes Operator Type : Toggle Lever Auxiliary Contacts : None Enclosure : NEMA Type 1 Light Options : 120V/60Hz 100V/50Hz Light Color : Red Pilot Light No Late Point Modification - Factory Assembled Accessories : 3 Heater Catalog Number : CR123C066A Heaters Full Load Amps : 0.63 Heaters Quantity : 3 Outline Diagram : 55-155519
Page: 1
Starter Drawings
gimagination at work
Catalog #: CR101Y11
Catalog #: CR1062R2AAT202R
Starter Publications
gimagination at work
NEMA Full Voltage Power Devices
Section 1
NEMA Rated Full Voltage Starters - Manual CR1062 Single-Phase and Polyphase 10 HP Maximum 600 Volts 25 to 60 Hertz
Application
Product Number Selection Instructions
Designed for controlling small ac motors. Standard CR1062R and S starter forms provide overload protection but cannot be used where undervoltage protection is required or for remote or automatic operation. Features
1. Devices may be ordered under the new easy-to-use product numbering system outlined on page 1-171. Customers may still use the original product numbering system for devices listed on page 1-172. 2. Select overload relay heaters from tables on page 1-174. Three heaters should be specified and ordered as separate items. List Price $9.00 each, GO-10H. Packaged in quantities of three; must be ordered in multiples of three. Minimum order quantity is three. Single-phase forms require one heater, fourpole forms require two heaters and three-pole forms require three heaters.
—Front-connected; clamp-type terminals for easy wiring. —Trip-free overload mechanism; can’t be held closed. —Knockout in enclosure cover permits installation of indicating light kit.
Schematic Diagrams
Typical 3-Phase Connections CR1062R & S
Typical Single-Phase Connections CR1062R & S
Typical Single-Phase Connections CR1062T
Typical Connections for DC Starters
Horsepower Ratings Maximum Horsepower Ratings Coil Motor Voltage and Frequency 60 Hertz Phase
NEMA Size
Single
Three
115 V
200-208 V
230-240 V
50 Hertz 277 V
460-600 V
380 V
M-0
1
—
2
2
—
—
M-1
2
—
3
2
—
—
M-1P
3
—
5
2
—
—
M- 0
—
3
3
—
5
5
M- 1
—
7-1/2
7-1/2
—
10
10
Reference Publications Instructions
GEH-4737
Product Number Selection Instructions: See page 1-170
1-170
Control Catalog
www.geelectrical.com
Rev. 1/10
Prices and data subject to change without notice
NEMA Full Voltage Power Devices
Section 1
NEMA Rated Full Voltage Starters - Manual CR101H, CR101Y Single-Phase 1 Hp Maximum @ 115V or 230V 3/4 Hp Maximum @ 277V for 2-pole Forms 25-60 Hz The CR101H and CR101Y manual motor starters provide dependable overload protection for single-phase motors up to one horsepower (115 or 230 Volts), and are the most economical starter choices where undervoltage protection is not required. CR1062 series of manual starters are designed for infrequent starting of single-phase and polyphase motors up to ten horsepower on applications where they can be directly operated.
Application Designed for starting and stopping single-phase motors up to 10 HP. These manual starters have provision for overload protection and their low cost provides economical starter selection for applications where no undervoltage protection is required. This line of starters may be used on such equipment as grinders, conveyors, fans, mixers, and blowers.
Features —Terminal design; box terminals provide easy access for wiring. —Molded plastic switch housing; protects starter mechanism. —Small size; open starter fits GEM™ or handy box.
Open Starter
Product Number Selection Instructions Order starter by complete product number and specify overload heater as a separate item by complete product number. Examples: 1. A general-purpose enclosed starter for surface wall mounting is desired. The starter is to break both lines. Motor to be started with this device has a full-load current of 0.6 Ampere. Order: 1 CR101H1 manual motor starter at $45.00 each, GO-10G3. 1 CR123H074A heater at $6.00 each, GO-10G3. 2. The complete combination surface-mounted station, CR101H12, may also be ordered by components, e.g. order 1–CR101X10 flush plate, at $71.00 each, GO-10G3; 1–CR101X14 box at $6.00 each, GO-10G3; and 1–CR101H manual starter at $39.00 each, GO-10G3. The other complete general-purpose manual starters may be broken down in this manner.
Manual Starter in NEMA Type 1 General Purpose Enclosure
NEMA Rated Full Voltage Manual Starters – Contents Application Information and Selection Instructions (CR101H, CR101Y) ........................1-164 Non-combination, Single Phase .......................................................................................................1-165 Enclosure Components.........................................................................................................................1-166 Outlines and Dimensions (CR101H, CR101Y)..............................................................................1-167 Application Information and Selection Instructions (CR1062) ...........................................1-168 Single-Phase and Polyphase..............................................................................................................1-169 Outlines and Dimensions (CR1062) .................................................................................................1-171 Manual Starter Heaters for Single-phase and Polyphase ...................................................1-172
1-164
Control Catalog
www.geindustrial.com
NEMA Type 4 Water- and Dust-Tight Manual Starter
Rev. 8/15
Prices and data subject to change without notice
NEMA Full Voltage Power Devices
Section 1
NEMA Rated Full Voltage Starters - Manual CR101H, CR101Y Single-Phase Non-combination 1 HP Maximum at 115 or 230 Volts 3/4 HP Maximum at 277 Volts for 2 pole forms 25 to 60 Hz CR101H, CR101Y
Overload Heater Units for CR101H, Y
Open starters include an unmounted nameplate. List prices do not include heater(s). Heaters can be selected from the table at right and ordered as a separate item at $6.00 each, GO-10H. One heater is required per starter (two for 2-speed forms and for combination starter CR101H13).
All CR123H heaters are packaged as single units.
Toggle-Operated Nonreversing Open1
Listed values are for motors with 1.15-1.25 service factor. For motors with 1.0 service factor continuously, multiply full-load current of motor by 0.9 and use this value to select heater. Contact nearest GE Representative for recommendation on heaters to be used with definite-purpose motors. If motor full-load Amperes falls between two ratings, select heater for the highest of those two.
No. of Poles
List Price GO-10G3
Product Number
1 CR101Y2 $33.00 2 CR101H2 $39.00 1For flush or outlet box mounting. 2Units are individually boxed and “Poly-Packed” 10 per carton as standard.
Toggle-Operated Nonreversing Enclosed NEMA Type 13 No. of Poles
Indicating Light
Product Number
List Price GO-10G3
1 No CR101Y12 $39.00 2 No CR101H12 $45.00 1 Yes CR101Y114 $57.00 2 Yes CR101H114 $63.00 2Units are individually boxed and “Poly-Packed” 10 per carton as standard. 3Surface mounting. 4Includes a 115/230-Volt neon lamp(s). Not available at 277 Volts.
Lever-Operated Nonreversing Enclosed NEMA Type 3/4/12 Hubs
Product Number
List Price GO-10G3
3/4-inch Hub on One End 3/4-inch Hub on One End 3/4-inch Hub on Both Ends 3/4-inch Hub on Both Ends
CR101Y400H CR101H400H CR101Y400J CR101H400J
$138.00 $144.00 $150.00 $156.00
No. of Poles 1 2 1 2
Multi-speed Enclosed NEMA Type 1 Surface Mount No. of Poles
Indicating Light
Product Number
1 None CR101Y600B 1 Two CR101Y610B4 2 None CR101H600B 2 Two CR101H610B4 4Includes a 115/230-Volt neon lamp(s). Not available at 277 Volts.
List Price GO-10G3 $172.00 $255.00 $187.00 $270.00
Multi-speed Enclosed NEMA Type 1 Gray Flush-Plate No. of Poles
Indicating Light
Product Number
1 None CR101Y600A 1 Two CR101Y610A4 2 None CR101H600A 2 Two CR101H610A4 4Includes a 115/230-Volt neon lamp(s). Not available at 277 Volts.
List Price GO-10G3 $165.00 $247.00 $180.00 $262.00
Multi-speed Enclosed NEMA Type 1 Stainless-Steel Flush-Plate No. of Poles
Indicating Light
Product Number
1 None CR101Y608A 1 Two CR101Y618A4 2 None CR101H608A 2 Two CR101H618A4 4Includes a 115/230-Volt neon lamp(s). Not available at 277 Volts.
List Price GO-10G3 $172.00 $255.00 $187.00 $270.00
Combination Device Enclosed NEMA Type 1 Description
Product Number
List Price GO-10G3
CR101H + Base Unit HOA 2 (CR101H)
CR101H12 CR101H13
$102.00 $108.00
No. of Poles 2 2
Rev. 8/15
Prices and data subject to change without notice
www.geindustrial.com
Product Number
List Price Each, GO-10H
CR123H (all)
$6.00
The table below gives a proper size heater to trip the switch on approximately 125 percent motor current.
For 1.35 service factor motors, multiply full-load current of motor by 1.15 and use this value to select heater(s). Maximum Motor Full-Load Amperes .48 .53 .58 .65 .71 .78 .86 .95 1.04 1.14 1.25 1.37 1.49 1.63 1.78 1.95 2.13 2.32 2.53 2.76 3.01 3.27 3.56 3.88 4.22 4.60 5.00 5.43 5.90 6.41 6.98 7.60 8.25 8.95 9.75 10.6 11.4 12.5 13.6 14.8 16.0
Heater Product Number CR123H055A CR123H061A CR123H067A CR123H074A CR123H082A CR123H090A CR123H099A CR123H108A CR123H120A CR123H132A CR123H144A CR123H158A CR123H172A CR123H188A CR123H205A CR123H224A CR123H245A CR123H267A CR123H291A CR123H317A CR123H346A CR123H377A CR123H410A CR123H446A CR123H486A CR123H529A CR123H575A CR123H625A CR123H680A CR123H739A CR123H802A CR123H873A CR123H950A CR123H103B CR123H112B CR123H122B CR123H132B CR123H144B CR123H157B CR123H171B CR123H186B
Maximum Horsepower Ratings-AC or DC Continuous Carry-16 Amperes Product No. of Horsepower Horsepower Horsepower Horsepower Horsepower Horsepower Number Poles @ 32 V AC @ 115 V AC @ 230 V AC @ 277 V AC @ 115 V DC @ 230 V DC CR101Y CR101H
1 2
1/4 1/4
1 1
1 1
Control Catalog
— 3/4
1 1
1/4 1
1-165
NEMA Full Voltage Power Devices
Section 1
NEMA Rated Full Voltage Starters - Manual CR101H, CR101Y Enclosure Components Enclosure Components - Single Units Flush plates painted gray or of stainless steel are available for flush mounting of all listed open manual starters. Safety to maintenance personnel and operators and security to equipment is provided by locking attachment, CR101X3, for use on all toggle-operated manual starter forms. Customers can assemble CR101H1, H11, Y1, or Y11 general-purpose manual starters by adding either an open CR101H or Y manual starter to a CR101X6 back and a CR101X4 or X5 cover. Product Description
Product Number
Flush plate with 115/230-Volt indicating light and screws Standard flush plate with screws Locking attachment (lock not included) Cover (front with 115/230-Volt neon indicating light and screws) Standard cover (front with screws) Enclosure back with screws (surface-mounting) Stainless-steel flush plate with 115/230-Volt indicating light and screws Stainless-steel flush plate with screws
CR101X4 Enclosure Components
List Price GO-10G3
CR101X1 CR101X2 CR101X3 CR101X4 CR101X5 CR101X6
$21.00 $3.00 $6.00 $21.00 $3.00 $3.00
CR101X7
$24.00
CR101X8
$6.00
CR101X6 Enclosure Components
Combination Plates and Box Customer convenience and flexibility is made possible by the availability of combination flush plates. These plates may be used flush mounted with a CR101X14 or other 2-1/2inch deep, two gang boxes to make a general-purpose surface-mounted installation. Open manual starters must be ordered separately. Product Description Combination flush plate with HAND-AUTO switch Combination flush plate with HAND-AUTO switch and 115/230-Volt neon indicating light Combination flush plate for 2—CR101 open starters Combination flush plate for 2—CR101 open starters with 2—115/230-Volt neon indicating lights Box (back) for combination forms
Product Number
List Price GO-10G3
CR101X10
$71.00
CR101X11
$84.00
CR101X12
$30.00
CR101X13
$60.00
CR101X14
$6.00
CR101X8 and CR101X7 Stainless Steel Flush Plates
CR101X11 Enclosure Components
CR101X3 Locking Attachment
CR101X14 Combination Flush Plate and Box (Back) Product Number Selection Instructions: See page 1-164
1-166
Control Catalog
www.geindustrial.com
Rev. 8/15
Prices and data subject to change without notice
NEMA Full Voltage Power Devices
Section 1
NEMA Rated Full Voltage Starters - Manual CR101H, CR101Y CR101 Open, Types 1, 4 in. Outlines and Dimensions (mm), and Weights (For Estimating Only)
CR101 Manual Starter in Type 1 Enclosure, 2 lbs.
CR101H12 or CR101X13 Combination Starter, 4 lbs.
CR101 Two-Speed Manual Starter in Type 1 Enclosure, 3 lbs.
CR101 Manual Starter in Type 4 Enclosure, 4 lbs.
CR101X12 or CR101X13 Combination Flush Plate, 1 lb.
CR101 Manual Starter, Open Type, 1 lb.
Rev. 8/15
Prices and data subject to change without notice
www.geindustrial.com
Control Catalog
1-167
PROJECT:
Brooks Elementary School Renovation 546152
DATE SENT:
SUBJECT:
230513-3 Enclosed Motor Controllers PD--for Approval
SUBMITTAL ID:
00041
TYPE:
Submittal
TRANSMITTAL ID:
00079
PURPOSE:
For Review
VIA:
Info Exchange
SPEC SECTION:
23 05 13
8/5/2016
RETURN BY:
FROM NAME
COMPANY
PHONE
Jessica Hill
Moseley Architects
[email protected] om
(919) 8400091 x9071
NAME
COMPANY
PHONE
Danielle Baker
Progressive Design Collaborative, Ltd.
[email protected]
(919) 7909989
Josh Alexander
PDC
[email protected]
Dan Bryant
Wake County Schools, NC
[email protected]
Fitzgerald Eric
Wake County Schools, NC
[email protected]
Kevin Short
Facility Dynamics
kshortt@facilitydynamics. com
TO
DESCRIPTION OF CONTENTS QTY
DATED
1
8/2/2016
TITLE
NUMBER
NOTES
230513-3 Enclosed Motor Controllers PD--for Approval.pdf
Page 1 of 1
ARCHITECT'S SUBMITTAL REVIEW Project: Brooks Elementary School Renovation - 546152
Date: 8/15/2016
Submittal No.: 0231.5 - DIV 23 - 0 Submittal Description: Enclosed Motor Controllers Reviewed By: Stephen Nally The following notes and Action ID's shall apply to this submittal:
Notes This review and these notes are subject to the limitations indicated in the General Conditions of the Contract for Construction, and as follows: (1) Architect’s review is for the limited purpose of checking for conformance with information given and the design concept expressed in the Contract Documents; (2) Architect’s review is not conducted for the purpose of determining the accuracy and completeness of other details such as dimensions and quantities, or for substantiating instructions for installation or performance of equipment or systems, all of which shall remain the responsibility of the Contractor as required by the Contract Documents; (3) Architect’s review shall not constitute approval of safety precautions or of any construction means, methods, techniques, sequences, or procedures; and (4) Architect’s approval or approval as noted of a specific item shall not indicate approval or approval as noted of an assembly of which the item is a component Notes related to this submittal do not relieve the Contractor from complying with the requirements of the Contract Documents. The Contractor shall verify that all necessary approvals as noted are obtained prior to proceeding with the fabrication, manufacturing, purchasing, and/or construction of any item, component, system, or assembly. The Contractor’s responsibilities include, but are not limited to, the following: (1) Correlation and confirmation of dimensions; (2) Information that pertains to the fabrication processes and/or to the means, methods, techniques, sequences, and procedures of construction; (3) Coordination of the Work of all trades; and (4) Performance of all Work in a safe and satisfactory manner If this submittal contains deviations from the Contract Documents, it is the responsibility of the Contractor to specifically inform the Architect in writing of all such deviations; and all such deviations shall be incorporated into the Contract Documents by the issuance of one of the following authorizing such deviations, prior to proceeding with fabrication, manufacture and/or construction: (1) Field Clarification (or other form used to convey minor changes to the Work); (2) Change Order; or (3) Construction Change Directive
Specification Description Section 230513 Product Data
File Code: C7 Submittals
Notes
Action ID C
P.1 of 2
Notes Regarding Submittal Review Action ID: B.
Approved as Noted: The Contractor is advised that fabrication, manufacturing, purchasing, and/or construction may proceed based on this submittal provided that the work is in full compliance with the Contract Documents.
C.
Revise and Resubmit: The Contractor is advised that fabrication, manufacturing, purchasing, and/or construction may not proceed based on this submittal, and that a revised submittal based on the Notes herein and in full compliance with the Contract Documents, shall be made to the Architect – until such time the Action ID – Approved as Noted is received from the Architect.
D.
Rejected / Resubmit: The Contractor is advised that fabrication, manufacturing, purchasing, and/or construction may not proceed based on this submittal and a new submittal shall be made to the Architect – until such time the Action ID – Approved as Noted is received from the Architect.
E.
Color Selection Required: The Contractor is advised that color selections for the entire project, or portion thereof, will be provided after receipt of all color charts / samples required for the Project.
F.
Not Reviewed: The Contractor is advised that this submittal has not been reviewed.
G.
Not Submitted: Contractor is advised that the Contract Documents require a submittal for this Work. A submittal for this Work shall be made by the Contractor which shall receive the Action ID – Approved as Noted prior to proceeding with any fabrication, manufacturing, purchasing, and/or construction.
File Code: C7 Submittals
P.2 of 2
Submittal #230513-3.0 230513 - Enclosed Motor Controllers Project: 16-2003 - Brooks Elementary School
Bordeaux Construction 135 E. Martin St. 101 Raleigh, North Carolina 27601 Phone: (919) 220-1141
Manual Motor Starters PD SPEC SECTION:
230513 - Enclosed Motor Controllers
CREATED BY:
Keifer Ewing (Bordeaux Construction)
STATUS:
Open
DATE CREATED:
08/02/2016
ISSUE DATE:
08/02/2016
REVISION:
0
RESPONSIBLE CONTRACTOR:
Nationwide Electrical Services
RECEIVED FROM:
RECEIVED DATE: //
SUBMIT BY:
//
FINAL DUE DATE: //
LOCATION:
TYPE:
COST CODE: Ben Warren (Bordeaux Construction), Jessica Hill (Moseley Architects - Morrisville)
APPROVERS:
General Contractor's Approval: Except as otherwise noted herein; the submittal has been checked and conformed to our interpretation of applicable requirements of job plans and specifications.: BALL IN COURT: Jessica Hill (Moseley Architects - Morrisville) DISTRIBUTION: DESCRIPTION: ATTACHMENTS:
SUBMITTAL WORKFLOW #
SUBMITTER/ APPROVER
NAME
1
Ben Warren
Approver
2
Jessica Hill
Approver
SENT DATE
DUE DATE
RETURNED RESPONSE DATE 8/2/2016
8/2/2016
Approved
ATTACHMENTS
COMMENTS
230513-3 Manual Motor Starters.pdf
Pending
NOTES: Specify each piece of equipment that is getting one of these 112 starters. Drawings state that externally furnished starters to be
X
8/12/16
BY
Bordeaux Construction
SLE
provided by Mechanical Contractor however these don't appear to be supplied by Mechanical Contractor. Coordinate starter with Electrical Contractor.
DATE
COPIES TO
Page 1 of 1
Printed On: 08/02/2016 01 :31 PM
Starter Bill of Material
gimagination at work
Speedi Version:
V 11.60
Bill of Material
Brooks Elem. School Quote #: Revision #:
S088607 3.0
_____________________________________________________________________________________________________________________________
Item# Qty Description _____________________________________________________________________________________________________________________________
36 97 Manual Motor Starter CR101Y11 Manual Motor Starter 101 Horse Power : 1 Voltage : 115V(AC) Phase : Single Phase Poles : Single Pole Type : Single-Speed Operator Type : Toggle Operated Enclosure : NEMA Type 1 Light Options : Indicating Light No Late Point Modification - Factory Assembled Accessories : 1 Heater Catalog Number : CR123H082A Heaters Full Load Amps : 0.71 Heaters Quantity : 1 Wiring Diagram : 55-184768
37 15 Manual Motor Starter CR1062R2AAT202R Manual Motor Starters 1062 Horse Power : 2 Voltage : 277V Phase : Single Phase (AC) Overload : Yes Operator Type : Toggle Lever Auxiliary Contacts : None Enclosure : NEMA Type 1 Light Options : 120V/60Hz 100V/50Hz Light Color : Red Pilot Light No Late Point Modification - Factory Assembled Accessories : 3 Heater Catalog Number : CR123C066A Heaters Full Load Amps : 0.63 Heaters Quantity : 3 Outline Diagram : 55-155519
Page: 1
Starter Drawings
gimagination at work
Catalog #: CR101Y11
Catalog #: CR1062R2AAT202R
Starter Publications
gimagination at work
NEMA Full Voltage Power Devices
Section 1
NEMA Rated Full Voltage Starters - Manual CR1062 Single-Phase and Polyphase 10 HP Maximum 600 Volts 25 to 60 Hertz
Application
Product Number Selection Instructions
Designed for controlling small ac motors. Standard CR1062R and S starter forms provide overload protection but cannot be used where undervoltage protection is required or for remote or automatic operation. Features
1. Devices may be ordered under the new easy-to-use product numbering system outlined on page 1-171. Customers may still use the original product numbering system for devices listed on page 1-172. 2. Select overload relay heaters from tables on page 1-174. Three heaters should be specified and ordered as separate items. List Price $9.00 each, GO-10H. Packaged in quantities of three; must be ordered in multiples of three. Minimum order quantity is three. Single-phase forms require one heater, fourpole forms require two heaters and three-pole forms require three heaters.
—Front-connected; clamp-type terminals for easy wiring. —Trip-free overload mechanism; can’t be held closed. —Knockout in enclosure cover permits installation of indicating light kit.
Schematic Diagrams
Typical 3-Phase Connections CR1062R & S
Typical Single-Phase Connections CR1062R & S
Typical Single-Phase Connections CR1062T
Typical Connections for DC Starters
Horsepower Ratings Maximum Horsepower Ratings Coil Motor Voltage and Frequency 60 Hertz Phase
NEMA Size
Single
Three
115 V
200-208 V
230-240 V
50 Hertz 277 V
460-600 V
380 V
M-0
1
—
2
2
—
—
M-1
2
—
3
2
—
—
M-1P
3
—
5
2
—
—
M- 0
—
3
3
—
5
5
M- 1
—
7-1/2
7-1/2
—
10
10
Reference Publications Instructions
GEH-4737
Product Number Selection Instructions: See page 1-170
1-170
Control Catalog
www.geelectrical.com
Rev. 1/10
Prices and data subject to change without notice
NEMA Full Voltage Power Devices
Section 1
NEMA Rated Full Voltage Starters - Manual CR101H, CR101Y Single-Phase 1 Hp Maximum @ 115V or 230V 3/4 Hp Maximum @ 277V for 2-pole Forms 25-60 Hz The CR101H and CR101Y manual motor starters provide dependable overload protection for single-phase motors up to one horsepower (115 or 230 Volts), and are the most economical starter choices where undervoltage protection is not required. CR1062 series of manual starters are designed for infrequent starting of single-phase and polyphase motors up to ten horsepower on applications where they can be directly operated.
Application Designed for starting and stopping single-phase motors up to 10 HP. These manual starters have provision for overload protection and their low cost provides economical starter selection for applications where no undervoltage protection is required. This line of starters may be used on such equipment as grinders, conveyors, fans, mixers, and blowers.
Features —Terminal design; box terminals provide easy access for wiring. —Molded plastic switch housing; protects starter mechanism. —Small size; open starter fits GEM™ or handy box.
Open Starter
Product Number Selection Instructions Order starter by complete product number and specify overload heater as a separate item by complete product number. Examples: 1. A general-purpose enclosed starter for surface wall mounting is desired. The starter is to break both lines. Motor to be started with this device has a full-load current of 0.6 Ampere. Order: 1 CR101H1 manual motor starter at $45.00 each, GO-10G3. 1 CR123H074A heater at $6.00 each, GO-10G3. 2. The complete combination surface-mounted station, CR101H12, may also be ordered by components, e.g. order 1–CR101X10 flush plate, at $71.00 each, GO-10G3; 1–CR101X14 box at $6.00 each, GO-10G3; and 1–CR101H manual starter at $39.00 each, GO-10G3. The other complete general-purpose manual starters may be broken down in this manner.
Manual Starter in NEMA Type 1 General Purpose Enclosure
NEMA Rated Full Voltage Manual Starters – Contents Application Information and Selection Instructions (CR101H, CR101Y) ........................1-164 Non-combination, Single Phase .......................................................................................................1-165 Enclosure Components.........................................................................................................................1-166 Outlines and Dimensions (CR101H, CR101Y)..............................................................................1-167 Application Information and Selection Instructions (CR1062) ...........................................1-168 Single-Phase and Polyphase..............................................................................................................1-169 Outlines and Dimensions (CR1062) .................................................................................................1-171 Manual Starter Heaters for Single-phase and Polyphase ...................................................1-172
1-164
Control Catalog
www.geindustrial.com
NEMA Type 4 Water- and Dust-Tight Manual Starter
Rev. 8/15
Prices and data subject to change without notice
NEMA Full Voltage Power Devices
Section 1
NEMA Rated Full Voltage Starters - Manual CR101H, CR101Y Single-Phase Non-combination 1 HP Maximum at 115 or 230 Volts 3/4 HP Maximum at 277 Volts for 2 pole forms 25 to 60 Hz CR101H, CR101Y
Overload Heater Units for CR101H, Y
Open starters include an unmounted nameplate. List prices do not include heater(s). Heaters can be selected from the table at right and ordered as a separate item at $6.00 each, GO-10H. One heater is required per starter (two for 2-speed forms and for combination starter CR101H13).
All CR123H heaters are packaged as single units.
Toggle-Operated Nonreversing Open1
Listed values are for motors with 1.15-1.25 service factor. For motors with 1.0 service factor continuously, multiply full-load current of motor by 0.9 and use this value to select heater. Contact nearest GE Representative for recommendation on heaters to be used with definite-purpose motors. If motor full-load Amperes falls between two ratings, select heater for the highest of those two.
No. of Poles
List Price GO-10G3
Product Number
1 CR101Y2 $33.00 2 CR101H2 $39.00 1For flush or outlet box mounting. 2Units are individually boxed and “Poly-Packed” 10 per carton as standard.
Toggle-Operated Nonreversing Enclosed NEMA Type 13 No. of Poles
Indicating Light
Product Number
List Price GO-10G3
1 No CR101Y12 $39.00 2 No CR101H12 $45.00 1 Yes CR101Y114 $57.00 2 Yes CR101H114 $63.00 2Units are individually boxed and “Poly-Packed” 10 per carton as standard. 3Surface mounting. 4Includes a 115/230-Volt neon lamp(s). Not available at 277 Volts.
Lever-Operated Nonreversing Enclosed NEMA Type 3/4/12 Hubs
Product Number
List Price GO-10G3
3/4-inch Hub on One End 3/4-inch Hub on One End 3/4-inch Hub on Both Ends 3/4-inch Hub on Both Ends
CR101Y400H CR101H400H CR101Y400J CR101H400J
$138.00 $144.00 $150.00 $156.00
No. of Poles 1 2 1 2
Multi-speed Enclosed NEMA Type 1 Surface Mount No. of Poles
Indicating Light
Product Number
1 None CR101Y600B 1 Two CR101Y610B4 2 None CR101H600B 2 Two CR101H610B4 4Includes a 115/230-Volt neon lamp(s). Not available at 277 Volts.
List Price GO-10G3 $172.00 $255.00 $187.00 $270.00
Multi-speed Enclosed NEMA Type 1 Gray Flush-Plate No. of Poles
Indicating Light
Product Number
1 None CR101Y600A 1 Two CR101Y610A4 2 None CR101H600A 2 Two CR101H610A4 4Includes a 115/230-Volt neon lamp(s). Not available at 277 Volts.
List Price GO-10G3 $165.00 $247.00 $180.00 $262.00
Multi-speed Enclosed NEMA Type 1 Stainless-Steel Flush-Plate No. of Poles
Indicating Light
Product Number
1 None CR101Y608A 1 Two CR101Y618A4 2 None CR101H608A 2 Two CR101H618A4 4Includes a 115/230-Volt neon lamp(s). Not available at 277 Volts.
List Price GO-10G3 $172.00 $255.00 $187.00 $270.00
Combination Device Enclosed NEMA Type 1 Description
Product Number
List Price GO-10G3
CR101H + Base Unit HOA 2 (CR101H)
CR101H12 CR101H13
$102.00 $108.00
No. of Poles 2 2
Rev. 8/15
Prices and data subject to change without notice
www.geindustrial.com
Product Number
List Price Each, GO-10H
CR123H (all)
$6.00
The table below gives a proper size heater to trip the switch on approximately 125 percent motor current.
For 1.35 service factor motors, multiply full-load current of motor by 1.15 and use this value to select heater(s). Maximum Motor Full-Load Amperes .48 .53 .58 .65 .71 .78 .86 .95 1.04 1.14 1.25 1.37 1.49 1.63 1.78 1.95 2.13 2.32 2.53 2.76 3.01 3.27 3.56 3.88 4.22 4.60 5.00 5.43 5.90 6.41 6.98 7.60 8.25 8.95 9.75 10.6 11.4 12.5 13.6 14.8 16.0
Heater Product Number CR123H055A CR123H061A CR123H067A CR123H074A CR123H082A CR123H090A CR123H099A CR123H108A CR123H120A CR123H132A CR123H144A CR123H158A CR123H172A CR123H188A CR123H205A CR123H224A CR123H245A CR123H267A CR123H291A CR123H317A CR123H346A CR123H377A CR123H410A CR123H446A CR123H486A CR123H529A CR123H575A CR123H625A CR123H680A CR123H739A CR123H802A CR123H873A CR123H950A CR123H103B CR123H112B CR123H122B CR123H132B CR123H144B CR123H157B CR123H171B CR123H186B
Maximum Horsepower Ratings-AC or DC Continuous Carry-16 Amperes Product No. of Horsepower Horsepower Horsepower Horsepower Horsepower Horsepower Number Poles @ 32 V AC @ 115 V AC @ 230 V AC @ 277 V AC @ 115 V DC @ 230 V DC CR101Y CR101H
1 2
1/4 1/4
1 1
1 1
Control Catalog
— 3/4
1 1
1/4 1
1-165
NEMA Full Voltage Power Devices
Section 1
NEMA Rated Full Voltage Starters - Manual CR101H, CR101Y Enclosure Components Enclosure Components - Single Units Flush plates painted gray or of stainless steel are available for flush mounting of all listed open manual starters. Safety to maintenance personnel and operators and security to equipment is provided by locking attachment, CR101X3, for use on all toggle-operated manual starter forms. Customers can assemble CR101H1, H11, Y1, or Y11 general-purpose manual starters by adding either an open CR101H or Y manual starter to a CR101X6 back and a CR101X4 or X5 cover. Product Description
Product Number
Flush plate with 115/230-Volt indicating light and screws Standard flush plate with screws Locking attachment (lock not included) Cover (front with 115/230-Volt neon indicating light and screws) Standard cover (front with screws) Enclosure back with screws (surface-mounting) Stainless-steel flush plate with 115/230-Volt indicating light and screws Stainless-steel flush plate with screws
CR101X4 Enclosure Components
List Price GO-10G3
CR101X1 CR101X2 CR101X3 CR101X4 CR101X5 CR101X6
$21.00 $3.00 $6.00 $21.00 $3.00 $3.00
CR101X7
$24.00
CR101X8
$6.00
CR101X6 Enclosure Components
Combination Plates and Box Customer convenience and flexibility is made possible by the availability of combination flush plates. These plates may be used flush mounted with a CR101X14 or other 2-1/2inch deep, two gang boxes to make a general-purpose surface-mounted installation. Open manual starters must be ordered separately. Product Description Combination flush plate with HAND-AUTO switch Combination flush plate with HAND-AUTO switch and 115/230-Volt neon indicating light Combination flush plate for 2—CR101 open starters Combination flush plate for 2—CR101 open starters with 2—115/230-Volt neon indicating lights Box (back) for combination forms
Product Number
List Price GO-10G3
CR101X10
$71.00
CR101X11
$84.00
CR101X12
$30.00
CR101X13
$60.00
CR101X14
$6.00
CR101X8 and CR101X7 Stainless Steel Flush Plates
CR101X11 Enclosure Components
CR101X3 Locking Attachment
CR101X14 Combination Flush Plate and Box (Back) Product Number Selection Instructions: See page 1-164
1-166
Control Catalog
www.geindustrial.com
Rev. 8/15
Prices and data subject to change without notice
NEMA Full Voltage Power Devices
Section 1
NEMA Rated Full Voltage Starters - Manual CR101H, CR101Y CR101 Open, Types 1, 4 in. Outlines and Dimensions (mm), and Weights (For Estimating Only)
CR101 Manual Starter in Type 1 Enclosure, 2 lbs.
CR101H12 or CR101X13 Combination Starter, 4 lbs.
CR101 Two-Speed Manual Starter in Type 1 Enclosure, 3 lbs.
CR101 Manual Starter in Type 4 Enclosure, 4 lbs.
CR101X12 or CR101X13 Combination Flush Plate, 1 lb.
CR101 Manual Starter, Open Type, 1 lb.
Rev. 8/15
Prices and data subject to change without notice
www.geindustrial.com
Control Catalog
1-167
